This Silver Snowflake Christmas Card uses Snowflakes in the Banner, the Foil Snowflake, and a stamped Snowflake. Change the stamped sentiment to use for any occasion.
SUPPLIES: Stamps: Colorful Seasons Photopolymer #143726
Teeny Tiny Wishes Wood Mount #128748, Clear Mount #127802 Ink: Smoky Slate
Cherry Cobbler Cardstock: Thick Whisper White
Silver Foil Sheets #132178
Year of Cheer Specialty Designer Series Paper (DSP) #144640 Punches: 1-3/4″ Circle #119850
2″ Circle #133782
Banner Triple #138292 Embellishments: Year of Cheer Embellishments #144643
Silver 1/8″ Ribbon #132137
Rhinestone Basic Jewels #144220
Foil Snowflakes #144642 Adhesives: Fast Fuse or SNAIL
INSTRUCTIONS: 1.Cut& Prep:
~Thick Whisper White card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″.
~Whisper White card front at 4″ x 5-1/4″.
~Year of Cheer Snowflake paper at 2″ x 5-1/4″. Punch one end with the Banner Triple Punch.
~Punch a 2″ Silver Foil Circle
~Stamp a Snowflake in Smoky Slate on Whisper White cardstock. Punch out with the 1-3/4″ Circle Punch. 2. Stamp Merry Christmas or another sentiment in Cherry Cobbler ink on the lower right corner of your Whisper White card front. 3. Attach your Year of Cheer Snowflake Banner with Fast Fuse about 1/4″ from the left edge and at the top of your Whisper White card front. 4. Layer your Circle Punches with Fast Fuse. Put Stampin’ Dimensionals on the back of the Silver Foil Circle. Attach to the center of a Silver Foil Snowflake. Use either Fast Fuse or Glue Dots on the back of the Snowflake under the Circles and attach to the card front. 5. Attach your card front to your Thick Whisper White card base with Fast Fuse. 6. Thread the Year of Cheer embellishment onto your Silver Ribbon. Tie the bow with the embellishment under the knot. Attach your bow to your layered circles with several Glue Dots-one under the knot, one on each side of the knot. I found the bow did not stay tied otherwise. 7. Add a Rhinestone to the center of your stamped snowflake.
Your Card is Finished!
Make this fun Fall Cat card using and Embossing Folder coloring technique!
This Video is 3-1/2 minutes long.
SUPPLIES: Stamps: Count My Blessings Wood Mount #144787, Clear Mount #144790 – Video Card
Spooky Cat Photopolymer #144749 (for Cat card) Ink: Crumb Cake – both cards
Early Espresso – Video card
Memento Black – Cat card
Tangerine Tango – Cat card
Whisper White -Cat card Card Stock: Whisper White
Basic Black – Cat card Big Shot: Woodland Embossing Folder #139673
Stitched Shapes Framelits #145372 Punch: Cat Punch #144666 Cat card Embellishments: Enamel Shapes – Cat card Adhesives: Tombow Glue
REMINDERS: 1. Lightly rub your ink pad on the inside of the embossing folder on the side where you can see the word “Sizzix: through it. Make sure you cover all the areas your 4″ x 5-1/4” Whisper White card stock will be. It does not have to be perfect through. 2. Stamp the cat face first, then punch out the cat. Watch the video for this. Glue the cat onto the card front. 3. Cardstock measurements:
~Tangerine Tango card base: 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″.
~Whisper White card front: 4″ x 5-1/4″ 4. Stamp your greeting on Whisper White cardstock then cut out with your Stitched Shapes Oval. Add embellishments if desired. Attach to card front with Stampin’ Dimensionals.
~If you are using the Happy Halloween sentiments, stamp the main part with Memento Black ink on Whisper White card stock first, then stamp the Happy Halloween in Tangerine Tango last.
Need some Halloween of Fall paper crafting supplies? Try out My Online Store open night and day without leaving your home.
This cut Happy Halloween Bat Card is easy to make. You even get to use real Punches!
This Video is 3-1/2 minutes long.
SUPPLIES: Stamps: Spooky Cat Photopolymer #144749 Ink: Tangerine Tango Cardstock: Thick Very Vanilla
Spooky Night Designer Series Paper #144610 Punches: 1-1/2″ Circle #138299
3/4″ Circle #119873 Embellishments: Rhinestones #144220
Basic Black 3/8″ Shimmer Ribbon #144129 Adhesives: Fast Fuse or SNAIL
Glue Dots (optional)
INSTRUCTIONS: 1. Cut your Thick Very Vanilla card base at 4-1/4″ x 11″. SCORE and fold at 5-1/2″. 2. Cut your Thick Very Vanilla card front at 3-3/4″ x 5″. Stamp your Happy Halloween in Tangerine Tango ink on the lower right corner about 1/2″ above the bottom edge. 3. Cut your Designer Series Paper at 1″ x 3-3/4″. Attach it to the card front about 1″ from the bottom. Tie your ribbon around the card front and tie in a knot. Position as desired. Use a Glue Dot or two to hold it in place if necessary. 4. Punch the Bat and attach to your card front as shown in the video. 5. Attach the card front to the card base with Stampin’ Dimensionals. 6. Stamp Happy Halloween on you envelope flap if desired.
This cute Punch Art Pumpkin Card can be made with either or both Punches or Framelits. Change the sentiment to use for ANY Fall occasion.
SUPPLIES: Stamps: Spooky Cat Photopolymer #144749 Inks: Crushed Curry
Old Olive Card Stock: Old Olive
Pumpkin Pie Big Shot: Layering Oval Framelits #141706 Punch: 1-1/2″ Circle Punch #138299 Ribbon: Daffodil Delight 1/4″ Double Stitched Ribbon #144116 Tools: Fringe Scissors (retired) OR Paper Snips
Stamping Sponge #141337 Adhesives: Fast Fuse or SNAIL
Tear & Tape
Tombow Glue or Glue Dots
INSTRUCTIONS: 1. Cut & Prep:
~Old Olive card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″.
~Early Espress card layer at 4″ x 5-1/4″. Attach to card base.
~Whisper White at 3-3/4″ x 5″. Sponge all over with Crushed Curry ink. Then sponge with a pouncing motion in random spots to get the effect you want.
~Cut out 3 of the smaller ovals from Pumpkin Pie card stock with your Big Shot.
~Punch out 3 1-1/2″ circles from Pumpkin Pie card stock.
~Stamp your sentiment on Whisper White card stock wity Early Espresso ink. Cut out with a Layering Oval Framelit. Cut a Scallop Oval slightly larger from Early Espresso card stock. Layer together with SNAIL or Glue Dots.
~Cut Old Olive at 1-1/4″ x 5″. Put some Tear & Tape along one of the long edges. Now cut your grass blades to the Tear & Tape. 2. Assemble:
~Attach your Grass with the Tear and Tape to the bottom edge of your sponged Whisper White.
~Cut your Ribbon about 16″ long. Put SNAIL on the back leaving 3″ at each end without tape on. Wrap the ribbon around the grass. Tie a knot on the left side. Trim ends.
~Lay out the Oval and Circle Pumpkins and the sentiment.
~Attach two Ovals to the sponged layer, slightly overlapping with Fast Fuse. Attach the last Oval with Stampin’ Dimensionals in the center of the other Ovals. Repeat with the Circles. Cut stems with Paper Snips from Old Olive cardstock.
~Attach your sentiment with Stampin’ Dimensionals.
Your card is finished! 3. Envelope. Sponge the edges and flap if desired.
~Thick Very Vanilla card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″.
~Peekaboo Peach at 3-1/4″ x 4-1/4″
~Patterned Pumpkin Paper at 2″ x 4″.
~Punch two Garden Green Leaves 2. Stamp & Cut. Stamp your sentiment in Garden Green ink on Tangerine Tango card stock. Cut out with the Lots of Label Framelit that fits best and your Big Shot. Put Stampin’ Dimensionals on the back. 3.Assemble.
~Attach your Peekaboo Peach card stock and your Pumkin Paper to your card base front lining up the side edges and maing the border around them fairly even.
~Attach your stamped label with Stampin’ Dimensionals.
~Decide where you want your leaves. Put either Glue Dots or Glue on the leaf parts that will attach to the lable. Attach.
You are finished with your card! 4. Envelope. If desired you can either: stamp leaves on the envelope, Put patterned paper on the envelope flap, or punch out leaves and Glue to envelope (Tombow Glue).
Get all the supplies for your Fall cards and paper crafting projects from My Online Store.
This is a quick and easy Spooky Cat and Moon Halloween Card. The hardest part is punching out the cat after embossing it’s face on the Basic Black Card stock. If you have the Spooky Night Designer Series Paper you can just punch out a cat! No embossing needed!!
INSTRUCTIONS: 1. Cut your Tangerine Tango card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your card front Happy Halloween paper at 4″ x 5-1/4″. Sponge around the edges with Cajun Craze ink. Attach to your card base. 3. Cat. Check out the Cat Punch Video!
~Option 1: Punch out of the Cat paper. You may have to trim close to the bottom of the cat so the Punch can get close enough to punch it out.
~Options 2:Cut a 3″ square piece of Basic Black card stock. Rub card stock with Embossing Buddy #103083. Set the punch next to the card stock so you can guess where to stamp the eyes in VersaMark ink. Stamp. Add White Embossing Powder. Remove Excess. Melt with Heat Tool. Punch out, positioning the cat face inside the cat head before you punch. 4. Cat Layers.
~Cut a 3-1/4″ square of Basic Black card stock.
~Cut the Tree and Moon Paper 3″ Square lining up where it meets the next picture square.
~Attach the Moom Paper to the Basic Black Square. Attach the Cat with Tombow Glue.
~Attach this square to the card front with Stampin’ Dimensionals.
You have finished the card! 5. Envelope. if desired stamp some of the images from the stamp set on your card front along the bottom or sides, and/or on the envelope flap/back.
I finally received my Holiday Catalog PreOrder! The Blue Flower and Leaves on this card uses the Painted Harvest Stamp set and Leaf Punch available as a Bundle. You can start ordering from the 2017 Holiday Catalog TODAY! You can see the pdf HERE.
I am still working on updating my blog. Please let me know if anything does not work correctly so I can fix it. This may take a while. I guess it is taking me longer to get back to normal than I expected.
You can see three NEW blog post projects each week starting on Monday, September 4th.
INSTRUCTIONS: 1. Cut your Marina Mist card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Stamp on Whisper White card stock:
~Leaves: Stamp 3 sets of leaves. Solid stamp=Lemon Lime Twist ink. Lined stamp=Wild Wasabi ink.
~words in Memento Black ink. Leave enough room around the edges for the Framelit to cut it out.
~Flower: Flower Center stamp: Pacific Point ink. Large flower stamp: 1st in Soft Sky ink. 2nd in Marina Mist ink-Rotate the stamp 180 degrees so you get a mor full looking flower. Smaller flower stamp: Pacific Point. 3.Cut & Punch:
~Punch the Leaves with the Leaf Punch.
~Cut out your words with the Stitched Shapes Framelit that best fits. I left space on the left side for the flower to overlap the die cut.
~Use scissors to fussy cut your flower. It goes pretty quickly if you cut a fairly close circle around the outside of the petals. Then you just need to cut inbetween the petals. 4. Adhesive:
~Put a Mini Stampin’ Dimensional behind each of the leaves.
~Put either Mini or Regular Stampin’ Dimensionals on the back of the flower.
~Lay out everything where you want it. Attach the leaves first, then the Stitched Framelit die cut, then the Flower. 5. Decorate your Envelope. Stamp some leaves on your envelope on the lower front corners and on the flap. Get the receiver excited to open your card!
You can buy all the supplies to make this card at My Online Store. Make sure and use the Hostess Code for the month if your order is under $150.
We are celebrating an anniversay in our family so I made a card using the die cut chairs from the Seasonal Layers Thinlits for the happy couple.
SUPPLIES: Stamps: Sheltering Tree Photopolymer #137163
Teeny Tiny Wishes Wood Mount #128748, Clear Mount #127802
Happy Birthday Gorgeous Photopolymer #143662 Inks: Garden Green
Dapper Denim Card Stock: Thick Whisper White Big Shot: Seasonal Layers Thinlits #143751 Punch: Classic Label #141491 Other: Watercolor Pencils #141709
Fine Tip Glue Pen or Tombow Glue
INSTRUCTIONS: 1. Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″. 2. Stamp with the Sheltering Tree stamps:
~The grass in Garden Green ink five times on the bottom edge of your card base.
~The Tree trunks & branches in Chocolate Chip ink on top of the grass hills.
~The Tree leaves in Wild Wasabi ink over the tree branches. 3. Stamp Happy Anniversary twice in Dapper Denim ink on Whisper White card stock. Then stamp the Classic Label Frame from Happy Birthday Gorgeous over the Happy Anniversary. Punch out with the Classic Label Punch. 4. Die cut two chairs from Whisper White card stock. (You might want to attach the Happy Anniversary to each chair before attaching to card base.) Attach to card base with Fine Tip Glue.
Make someone’s anniversary special by making them this fun anniversary card! Get everything to make this card at My Online Store: nendykerr.stampinup.net .
Here is another pretty quick and easy Crafting Forever card. It is stepped up a little from the last post with the addition of Ribbon and a Label.
SUPPLIES: Bundle: Label Me Pretty stamp set + Pretty Label Punch Wood Bundle #145304, Clear Mount Bundle #145305
Stamps: Crafting Forever Wood Mount #143955, Clear Mount #143958 Ink: Memento Black
Tranquil Tide Markers: Tranquil Tide
Bermuda Bay Card Stock: Thick Whisper White
Pool Party Ribbon: Bermuda Bay Mini Chevron #144198 Adhesives: Stampin’ Dimensionals
INSTRUCTIONS: 1. Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″. 2. Stamp your Pens in Memento Black ink directly onto your card base. (I would recommend you start stamping at the top.) Stamp as shown alternating the direction of the pens for each row. 3. Choose a group of pens to color. 4. Tie your ribbon around your card front tying a bow. Attach your ribbon to your card with a Glue Dot or two under the knot. 5. Choose the Label Me Pretty stamp you want and stamp in Tranquil Tide ink on Pool Party card stock. Color the Crafting Forever and the swirl underneath with your Tranquil Tide Marker. Stamp inside your Label. I wish I would have used my Stamp-a-ma-jig. Punch out with your Pretty Label Punch. Attach to your card base with Stampin’ Dimensionals.
Shop anytime at My Online Store: nendykerr.stampinup.net Click on “Shop Now” to get to my store.
Have fun making this card for one of your crafting friends….. or a friend who likes to write.
Here is another diagonal twist card – this time with a Flower and small sentiment. We are still using the Eastern Palace Premiere Bundle plus a few extras. This card uses the leftover diagonal cut pieces from the card on Monday. SUPPLIES: *Eastern Palace Premiere Bundle #147207 Stamps: *Eastern Beauty Photopolymer Stamp Set #143675
Teeny Tiny Wishes Wood Mount #128748, Clear Mount #127802 Inks: *Tranquil Tide #144085
*Lemon Lime Twist #144086
*Fresh Fig #144082 Card Stock: *Eastern Palace Card Stock Pack #144148-Tranquil Tide & Dapper Denim
*Eastern Palace Specialty Designer Series Paper #144147 Big Shot: *Eastern Medallions Thinlits #143725 Stitched Shapes Framelits #145372 Punch:Classic Label #141491 Other: Fast Fuse or SNAIL Adhesive
Optional Pearl for flower center: Metal Rimmed Pearls #138394, Basic Pearls are being reconfigured and will be available June 1st.
INSTRUCTIONS: 1. Cut your Dapper Denim card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut 2 pieces of patterned paper at 4″ x 5-1/4″. Cut the first piece diagonally.
For the second piece:
~Put it with the other side up.
~Hold one of the first cut diagonal pieces next to it to help you decide which way to cut it diagonally. Cut.
~Do you want to sponge around the edge? If you do, do it now. (I am out of town and forgot my sponges. I miss them!!!)
~Lay one of each pattern on your card front. Attach the bottom/right side first. Then attach the top/left side. Mine overlapped a little along the diagonal center to get it straight.
~Add a border sticker to the one edge if desired.
~Repeat with the other two diagonal pieces. I put these on a Tranquil card base. See Monday’s post for this card. 3. Stamp the Eastern Beauty Flower on Whisper White card stock with Fresh Fig ink. Stamp the little heart inside each petal with Fresh Fig ink. Cut out with the coordinating Framelit. Put Stampin’ Dimensionals on the back. 4. Stamp your sentiment on Whisper White card stock with Tranquil Tide ink. Punch out with the Classic Label Punch. Stamp the circles or other small image with Lemon Lime Twist ink. Add Stampin’ Dimensionals to the back. 5. Cut a Stitched Shapes Circle Framelit from Tranquil Tide card stock. Attach the die cut Flower to it. Put Stampin’ Dimensionals on the back and attach the to the upper left part of the card. Attach your sentiment to the lower right part of the card. I would put a pearl in the center of the flower if I had one. 🙂
Shop at My Online Store to get all your paper crafting and card making supplies.
Choose your favorite Washi Tape and Happy Birthday Stamp. Add a flower punch or die cut to complete the card. SUPPLIES: Stamps:Big on Birthdays Photopolymer #142877 Ink: Melon Mambo Card Stock: Thick Whisper White for card base
Melon Mambo for flower Punch:Pansy #130698 Washi Tape:Affectionately Yours #141635 (Retiring-While supplies last) Other: Basic Rhinestones (Sold out. Reconfigured Rhinestones available June 1st, 2017)
INSTRUCTIONS: 1. Choose two rolls of Washi Tape, Birthday stamp, and ink color. 2. Cut your Thick Whisper White at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″. 3. Stamp Happy Birthday in Melon Mambo (or coordinating ink color). 4. Decide on placement on Washi Tape especially on the right side. Layer one color, then the other going both up along the right side and along the bottom edge. 5. Punch or die cut your flower from coordinating card stock. Add some Rhinestones to the center.
INSTRUCTIONS: 1. Cut your papers:
~Thick Whisper White card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″.
~Carried Away papers: 2″ x 5-1/4″ and 3″ x 4″
~Mint Macaron 3-1/4″ x 4-1/4″
~Whisper White 1/2″ x 2-1/2″ Stamp Happy Birthday in Night of Navy ink and cut notches on each end.
Punch your Balloons:
~Large Balloon from each Peekaboo Peach, Night of Navy, and Dazzling Diamonds Glimmer Paper 2. Now lay out all the pieces to get them where you want. Then attach to the card base.
~Lay the 2″ x 5-1/4″ Carried Away paper on the card base next to the fold.
~Attach the 3″ x 4″ Carried Away paper to the 3-1/4″ x 4-1/4″ Mint Macaron. Center on the front of the card.
~Place the balloons and Happy Birthday on the 3″ x 4″ Carried Away paper. Attach the Happy Birthday with Stampin’ Dimensionals. Attach the Peekaboo Peach and Night of Navy Balloons with Fast Fuse. Attach the Glimmer Paper Balloon with Stampin’ Dimensionals. Tie a Bow with the 1/8″ White Ribbon and attach it to the Glimmer Paper Balloon with a Glue Dot or two.
Try making this Birthday card with a variety of patterned papers and change the Balloon colors to coordinate with the paper.
INSTRUCTIONS: 1. Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″. 2. Cut your Sending Love paper at 4-1/4″ x 5-1/2″. Attach to card base. 3. Stamp in Real Red ink on Whisper White card stock:
~Happy Valentine’s Day
~First Sight heart 4. Cut out:
~The heart you stamped with either the Sweetheart Punch (shown) or one of the Sweet and Sassy Framelits. Sponge around the edges with Real Red ink.
~The heart from the Sending Love paper with either the Sweetheart Punch (shown), a Sweet and Sassy Framelit, or fussy cut it.
~Happy Valentine’s Day with the Stitched Shapes Circle Framelit. Sponge around the edges with Real Red ink.
~The Heart Strip: Cut Real Red card stock at 1-1/2″ x 5-1/2″. Place the straight edge of the Heart Strip Framelit and run through your Big Shot. 5. Assemble. Lay out all the pieces on your card front in the position you want them. Attach:
~The Heart Strip with Tombow Glue
~The Heart cut outs and the Happy Valentine’s Day with Stampin’ Dimensionals.
~Tie a bow with the Real Red Sending Love Ribbon. Attach it with 2-3 Glue Dots. 6. Decorate your envelope by stamping some of the heart stamps on your envelope front and/or flap.
Enjoy making this Lots of Hearts Valentine’s Day Card
This is a quick and easy card using Glassine paper for the background, a doily for the next layer, and a punched bow for the focal point. You can substitute any paper for the Glassine sheet, a die cut for the Doily, and a tied ribbon bow for the punched bow. You can also add a stamped greeting if desired. SUPPLIES: Card Stock: Night of Navy
Marina Mist Sending Love Glassine Sheets #142734 (or use Vellum) Lace Doilies #142793 Choose either the White or Vanilla side Punch: Bow Builder #137414
Other: Stamping Sponge wedge
Glue Dots Silicone Craft Sheet #127853
INSTRUCTIONS: 1. Cut your Night of Navy card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Sending Love Glassine Sheet at 3-1/2″ x 6″. The Glassine Sheet is 6″ wide. You can also use Vellum or patterned paper instead of the Glassine Sheet. 3. Angle your Glassine Sheet so it touches both the top right corner and the bottom left corner. Make marks slightly past the edges on both sides so you know where to apply your adhesive. You can use Glue Dots, but they show through the corners.
~Since I made this I have learned a new way to attach Glassine and Vellum without the adhesive showing through.
~Cut a Sponge wedge
~Put about a 3/4″ circle of Tombow Glue on your Silicone Craft Sheet. Pounce your Sponge wedge to cover the rounded part with Tombow Glue.
~Now Pounce your gluey Sponge Wedge evenly on the back of your Glassine Sheet or Vellum.
~Attach your Glassine Sheet to your card front, being careful to not glue it to the surface underneath.
~ Spread your Bone Folder over the top to flatten.
~Attach your Lace Doily using the gluey Sponge Wedge.
~Turn card over so the card front is facing down. Let dry while you make your Bow. 4. Punch your Marina Mist card stock twice with the Bow Builder Punch as you need two of most parts.
~Use your Bone Folder to curl the longer Bow pieces and one of the smallest rectangle pieces. The Bow ends do not need to be curled.
~Attach the ends of one long Bow piece together with a Glue Dot. Now attach the ends of the other Bow piece together with a Glue Dot. Attach the end of the two long Bow pieces together with a Glue Dot with one on the right side and one on the left side.
~Attach one Bow end to the bottom of each Long Bow piece with 2 Glue Dots so the Bow ends stick out evenly at the ends of the Long Bow pieces.
~Now attach the curled rectangle piece around the center of the Bow using a Glue Dot at each end and having the ends meet at the back of the Bow. 5. Attach the Bow to your card front with 3 Glue Dots. Your card is finished.
This Flower Birthday Candle card uses the Candle Punch and two layers of card stock to make a multi-colored candle. The flowers are colored with markers. So choose your birthday person’s favorite two colors to make your version of this card. SUPPLIES: Stamps:Big on Birthdays Photopolymer #142877 Ink: Watermelon Wonder Markers: Daffodil Delight
Old Olive Card Stock: Whisper White
Watermelon Wonder Punch:Candle Border #142764 Adhesive: SNAIL or Tombow Glue
INSTRUCTIONS: 1. Cut your So Saffron card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Whisper White card front at 4″ x 5-1/2″. Punch your Candle Border along one of the 5-1/2″ edges starting in the center, then punch each edge. Use your Paper Trimmer to cut 1/4″ off each 4″ side to just above the candles. Use scissors to cut the off the 1/4″ section off above the candle at the edge. You can cut at an angle if you want to. 3. Stamp your Happy Birthday in Watermelon Wonder ink. Color the flowers with Daffodil Delight Marker and the leaves and stems with Old Olive Marker. 4. Cut a 1/2″ x 5-1/2″ strip of both Watermelon Wonder and So Saffron. Attach under the candles. I just ran SNAIL along the bottom edge and over the candles, using my fingers to move the SNAIL from the open parts of the candles. Add the Watermelon Wonder card stock strip along the bottom edge so it shows through the candle cut outs. Line up the So Saffron strip so it touches the Watermelon Wonder strip. Make sure there is enough adhesive to attach the top. 5. Attach the card front to the card base with SNAIL.
Have fun making this Birthday Card in a variety of colors.
I was watching a video about someone making diamond shaped decorations and decided to try and make a Pumpkin and a Turkey using a Pyramid shape. These were pretty quick and easy. SUPPLIES: Ink: Peekaboo Peach Marker – Pumpkin
Tangerine Tango ink pad – Turkey
Basic Black Marker – Turkey Pumpkin Card Stock: Pumpkin Pie
Garden Green Turkey Card Stock: Soft Suede
Daffodil Delight Big Shot:Pyramid Pals Framelits #140618 Flower Fair Framelits #133731 Pumpkin Layering Circles Framelits #141705 Adhesive: Tombow Glue
NOTE: If you want to open the Pyramids so you can put something inside: Put a piece of tape on the inside of the tips, then after decorating, punch a 1/16″ hole about 1/8″ from the tip of each Triangle. Decorate the Pyramids. Close the Pyramids by threading Baker’s Twine through the holes. Tabs: You can glue the Front to the Tabs, but not the Back Triangle.
1. Cut a piece of Pumpkin Pie card stock at 5-1/2″ x 8-1/2″. Cut two of the Pyramid shape Framelits. Fold all score lines so both pieces are the same. 2. Draw oval like shapes on each triangle with the Peekaboo Peach Marker. 3. Put glue on the top side of one of the bottom squares. Attach the other square on top making sure that the sides with the tabs are opposite each other. 4. Cut a 1/8″ x 5-1/2″ strip of Garden Green card stock for the curly vines. Run a bone folder over it to start it curling. Find something round and narrow to wrap it around and curl it. I used one of my grandson’s metal cooking spoons with the round metal part about 1/8″ in diameter. Curl the strip around the round piece holding the end to keep it in place. Gently unwrap the strip so you keep the curl in. Cut it in half Glue both pieces to the tip so one part sticks up and the other angles across. 5. Cut a little stem from Garden Green card stock. You can cut a Garden Green leaf from the Flower Fair Framelits or just cut it with scissors. Glue the stem on top of the pyramid tip and over the curly vines. Glue the leaf to the stem.
TURKEY INSTRUCTIONS: 1. Cut a piece of Soft Suede
card stock at 5-1/2″ x 8-1/2″. Cut two of the Pyramid shape Framelits. Fold all score lines so both pieces are the same. 2. Choose one of the Triangle sides without tabs to be the Turkey front. Cut 3 Scallop Circles from Soft Suede card stock. Cut the circles in half. Sponge the scallops with Tangerine Tango ink. Layer and Glue the circles together. Glue to the Front Triangle. Trim off the excess. 3. Cut a Beak from Tangerine Tango card stock. Cut two “Bunny Ears” of each color: Daffodil Delight, Delightful Dijoh, Pumpkin Pie, Tangerine Tango, Cajun Craze, and Cherry Cobbler. Hand cut the two Real Red piece to make the Wattle and the Comb. 4. Glue the Wattle onto the back of the lower Beak. Glue the bottom of the Beak to the top of the Scallop Circles. Draw the Eyes with Basic Black Marker. Gle the Comb above the eyes. 5. Put Glue on the two tabs that attach to the Front Triangle. Repeat with the tabs for the Back Triangle. 6. Decide what color order to put your feathers in. Start with the center two and glue them to the back so they stick up high enough to make you happy. Work your way outward on both sides glueing all the bottom tips on top of the first two pieces. 7. You are done. Admire your cute Turkey.
INSTRUCTIONS: 1. Cut your Night of Navy card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut the rest of your card stock:
~Whisper White at 2-1/2″ x 4-1/4″
~Melon Mambo at 2-3/4″ x 4-1/4″
~Patterned Paper at 1″ x 5-1/2″ 3. Punch:
~Flower Medallion in Melon Mambo card stock
~Pansy in Whisper White
~3/4″ Circle in Night of Navy
Layer your Flowers with Stampin’ Dimensionals. Add the Circle to the Flower center with a Glue Dot. 4. Stamp your words in Night of Navy ink on the bottom of your Whisper White card stock. Attach your Flowers. 5. Attach your Whisper White layer to the Melon Mambo layer with Fast Fuse. 6. Attach your strip of Patterned Designer Series Paper to the center of your Night of Navy card base with Fast Fuse. Add your Flower layers to your card front.
Enjoy making this All Occasion Flower card in a variety of colors with words to fit the occasion.
INSTRUCTIONS: Watch This Video for Basic Baker’s Box instructions. 1. Cut your Baker’s Box Thinlit twice from Thick Whisper White card stock cut at 5-1/2″ x 8-1/2″. Fold all score lines so each piece looks the same. 2. Choose the Washi Tape pattern you like and apply next to the fold lines as shown in photo. 3. Add your Tear & Tape to the side tabs and the bottom flaps.
~Side Flaps (smaller): With the outside facing up, put Tear & Tape on the outside edge and the bottom on both pieces.
~Front and Back Flaps (larger with V in the center. I leave this part flat):
~~Front: Put Tear & Tape on the INSIDE of both sides of the V.
~~Back: Put Tear & Tape on the OUTSIDE of both sides of the V. 4. Punch and assemble Poinsettia Flower.
~Punch 4 times from Red Glimmer Paper.
~Fold all flower pieces in half length-wise with a Bone Folder so your flower will have some dimension.
~Attach two of the small double flowers that look like a funny bow tie in the center with a Glue Dot or two.
~Attach the four medium petals in between the smaller petals that you already attached. Use at least two Glue Dots.
~Now add the four large petals so they line up with the small center petals. If you want your flower to look more round add two more large petals.
~My flower was not holding together well so I criss-crossed Tear & Tape across the back of the large and medium Petals, then attached it to the front of the box.
~Add two of the + pieces to the center with the white side showing. Use a Glue Dot in the center of each and attach to the Flower center. 3. Assemble your Box: Attach the side Tabs. Now for the bottom flaps: sides first, then the Back Flap, and the Front Flap is last. 4. Finish:
~Stamp Merry Christmas on Whisper White card stock in Real Red ink. Cut out with the Desired Tags & Labels Framelit. Make sure and use the Small Circle Framelit to cut out the hole. Or you can use a 1/4″ Hole Punch like I did. Tie it onto the front hole in your Baker’s Box. Use a Glue Dot to hold it in position.
~Tie your Baker’s Box closed with the 3/4″ Real Red Ribbon.
Have fun making your own Christmas Baker’s Box. I hope you have enjoyed see ing a variety of ways to use your Baker’s Box Thinlits!
INSTRUCTIONS: 1. Cut your Very Vanilla card stock at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. Hold folded card base and sponge Tangerine Tango around the outside edges. 2. Cut your patterned paper at 4″ x 5-1/4″. Sponge around the edges. 3. Cut your Pumpkin Pie Glimmer Paper with the Layering Ovals of your choice. I used D3 Framelit. Cut three of the same size Oval. 4. Glue two Ovals onto your card front overlapping them by about 1/4″. Add your last Oval to the center with at least 3 Stampin’ Dimensionals. 5. Cut your Leaf from Old Olive card stock. Glue onto your Pumpkin. Some customers added a 2nd Leaf to the lower left corner and stamped their sentiment higher. 6. Stamp your sentiment in Memento Black ink. 7. You can sponge around your envelope edges and flap with the Tangerine Tango if desired.
Search Nendy’s Site
Sign up for my Newsletter
Current Stampin’ Up! Catalogs
Get your OWN Paper Pumpkin monthly Craft Kit!
Everything on the Blog and Website is made by me, Nendy Kerr, unless stated otherwise. Stampin’ Up! does not endorse the content on these pages. Thank you for visiting!