These Two Little 3D Pumpkin Friends were fun to make. I just did what I wanted with only looking at the pictures on the instructions. I am excited to make more of these cute containers!
SUPPLIES:
September Kit
Pencil
Paper Piercing tip of Take your Pick Tool
Glue Dots
Wire Cutters
INSTRUCTIONS:
1-Gather Your Pieces from the Kit:
~Orange Base
~Yellow Base
~Light Brown covered wires: 2
~Leaves for each Pumpkin: 2 of each shape
~White Die Cut Labels: 2
~Adhesives from the Kit
~Memento Black ink pad
2-Basic Pumpkin Directions:
~Fold and crease all fold lines with your Bone Folder.
~Curl the top half of each side. Be extra careful at the tips with the notch. If you accidentally curl it off, use Scotch single sided tape to wrap around the side that connects. Put the tape on one side. Wrap it around to cover the other side of the tear. Cut the slit if necessary.
~Attach your Pumpkin Face now if you want one. I put it on the side with the Hexagon flap.
Adhesive Strips go on the side you want to show.
~Put the short Adhesive Strips along the small bottom tabs next to the fold.
~Add the long Adhesive Strips to the side tab.
~Attach the side tab to the opposite side. Press firmly together.
~Get the Hexagon flap and attach it to the short tab opposite the Hexagon fold. Now attach the other bottom tabs. Use your Bone Folder to gently rub each small tab from inside your Pumpkin.
~To close your Pumpkin flaps: Fold in the plain top pieces first. Slide together two of the notched tabs. Take the Third notched side and slide it over the other notched tabs.
Orange Pumpkin:
~Put on your Pumpkin Face if you haven’t yet. It goes on the notched side with the bottom fold line.
~Stamp two of the larger leaves with the coordinating stamp and Soft Succulent ink. Fold in half.
~Get your covered wire. Put it behind one of your notched top flaps. Bend it around the flap. Use your Pencil to curl the wire on both sides of the flat part. Use Glue Dots to attach the flat part under the flap. Adjust your curls if needed.
~Stamp Happy Halloween on your White Die Cut Tag with your Memento Black ink pad.
~Thread the Tag Hold over the wire side closest to the face of your Pumpkin.
~Decide where you want your Leaves and where to place the Glue Dots. Put Glue Dots on one side of the folded Leaves on the top half. This way the Leaf would stick out over the curved part of the Pumpkin.
Yellow Pumpkin:
~Stamp two small Leaves with the coordinating stamp and Soft Succulent ink. Fold them in half. Attach Glue Dots to one upper side of each Leaf. Attach to the Notched Flaps.
~Use Soft Succulent ink to stamp your Words on your White Die Cut Tag.
~Cut your Wire 4″ to 5″ long. Bend in half. Thread your Tag through your straight wire. Use your Paper Piercing Tip/Tool to wrap each side of the wire around to make the narrow curls. Put a Glue Dot on the back of the wire and the top back of your Tag. Attach to your Pumpkin.
Your Two Little 3D Pumpkin Friends are finished.
Get Your OWN Paper Pumpkin Kit Every Month!
Sign up by the 10th to get the Kit for that month. If you sign up by October 10th, you will get the October Kit. The Paper Pumpkin info is at the bottom.
You can use the “No Worry” method and get a Month to Month Subscription. Just fill out your Name, Mailing Address, and Credit Card. Your Kit will start coming.
Or choose a PrePaid Subscription and pay one time. You select the number of months you want to receive the kits. You will need to activate your subscription. Follow the instructions in your confirmation email.
