This is the prototype for my Mother’s Day Cards. This one will be for my Mom because she likes pastels. I will change the colors for each of my daughters and daughters-in-laws because they like totally different colors. Hopefully I will remember to take a picture before I mail them out.
INSTRUCTIONS: 1. Cut your Powder Pink card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Powder Pink card front at 4″ x 5-1/4″. Use one of the Petal Pair embossing folders on one side of your card front and run it through the Big Shot. Repeat with the other side. Glue to your card base. 3. Die cut your flower pieces and leaves.
~Wild Wasabi Leaves: Cut three leaves with the May Flowers Framelits.
~Berry Burst top flower layer: Use both the flower petal die AND the framelit that fits around it to cut out this flower. You can put 1-1/2″ x 2″ piece of Multipurpose Adhesive Sheet on the back of the cardstock BEFORE cutting. This will turn it into a sticker. Otherwise just glue it onto the bottom flower layer.
~Fresh Fig bottom flower layer: Use the same Framelit that went around the flower petal die to cut this layer.
~Attach top flower layer to bottom flower layer.
~Attach leaves to the back of the flower. I used Tombow Glue. Put Stampin’ Dimensionals on the back of the flower.
~Now cut the desired Stitched Shapes Circle in Powder Pink. Put Stampin’ Dimensionals on the back.
~Stamp your Happy Mother’s Day on Whisper White cardstock in Berry Burst ink. Punch out with the Classic Label Punch. Put Mini Stampin’ Dimensionals on the back. 4.Put it all together:
~Lay all the pieces on your embossed card front where you want them.
~Put Tombow Glue on the back of the Doily in the center circle. Attach to card front.
~Attach the Stitched Shapes Circle with Stampin’ Dimensionals centering over the Doily.
~Attach the Flower and Leaves with Stampin’ Dimensionals behind the flower and put on the Stitched Shapes Circle.
~Attach your sentiment with Mini Stampin’ Dimensionals towards the bottom of the card.
Your Card is finished. 5. Envelope-Optional: Emboss your envelope flap with one of the Petal Pair embossing folders.
Get all the supplies to make this card from My Online Store. Handmade cards always let the receiver know you care enough to make something special just for them.
This Silver Snowflake Christmas Card uses Snowflakes in the Banner, the Foil Snowflake, and a stamped Snowflake. Change the stamped sentiment to use for any occasion.
SUPPLIES: Stamps: Colorful Seasons Photopolymer #143726
Teeny Tiny Wishes Wood Mount #128748, Clear Mount #127802 Ink: Smoky Slate
Cherry Cobbler Cardstock: Thick Whisper White
Silver Foil Sheets #132178
Year of Cheer Specialty Designer Series Paper (DSP) #144640 Punches: 1-3/4″ Circle #119850
2″ Circle #133782
Banner Triple #138292 Embellishments: Year of Cheer Embellishments #144643
Silver 1/8″ Ribbon #132137
Rhinestone Basic Jewels #144220
Foil Snowflakes #144642 Adhesives: Fast Fuse or SNAIL
INSTRUCTIONS: 1.Cut& Prep:
~Thick Whisper White card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″.
~Whisper White card front at 4″ x 5-1/4″.
~Year of Cheer Snowflake paper at 2″ x 5-1/4″. Punch one end with the Banner Triple Punch.
~Punch a 2″ Silver Foil Circle
~Stamp a Snowflake in Smoky Slate on Whisper White cardstock. Punch out with the 1-3/4″ Circle Punch. 2. Stamp Merry Christmas or another sentiment in Cherry Cobbler ink on the lower right corner of your Whisper White card front. 3. Attach your Year of Cheer Snowflake Banner with Fast Fuse about 1/4″ from the left edge and at the top of your Whisper White card front. 4. Layer your Circle Punches with Fast Fuse. Put Stampin’ Dimensionals on the back of the Silver Foil Circle. Attach to the center of a Silver Foil Snowflake. Use either Fast Fuse or Glue Dots on the back of the Snowflake under the Circles and attach to the card front. 5. Attach your card front to your Thick Whisper White card base with Fast Fuse. 6. Thread the Year of Cheer embellishment onto your Silver Ribbon. Tie the bow with the embellishment under the knot. Attach your bow to your layered circles with several Glue Dots-one under the knot, one on each side of the knot. I found the bow did not stay tied otherwise. 7. Add a Rhinestone to the center of your stamped snowflake.
Your Card is Finished!
This quick Christmas Card is perfect for making multiples! Enjoy!
SUPPLIES: Stamps: Oh, What Fun Photopolymer #140386
Teeny Tiny Wishes Wood Mount #128748, Clear Mount #127802 Ink: Fresh Fig Cardstock: Fresh Fig
Year of Cheer Specialty Designer Series Paper #144640
Foil Snowflakes #144642 Punch: 2-1/4″ Circle #143720 Embellishments: Gold 1/8″ Ribbon #134583
Year of Cheer Embellishments #144643 Adhesives: Fast Fuse or SNAIL
INSTRUCTIONS: 1.Cut & Prep: ~Fresh Fig Card Base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″.
~Whisper White card front at 3-3/4″ x 5″.
~Gold Plaid DSP at 2″ x 5″ Stamp: ~Wishing your a Sweet Season in Fresh Fig Ink on Whisper White cardstock. Punch out with 2-1/4″ Circle Punch.
~Merry Christmas in Fresh Fig ink on the lower right corner of your Whisper White card front. 2. Attach your stamped Circle to your Gold Snowflake with Stampin’ Dimensionals. 3. Thread your Year of Cheer Embellishment onto your Gold Ribbon. Tie a bow with the ribbon so the embellishment is in the knot. This way it can move freely. Attach your Bow to the bottom of your stamped Circle with a Glue Dot or two. 4. Lay out your Gold Plaid DSP and Snowflake Circle in the places you want them. Attach the DSP with Fast Fuse. Attach the Snowflake with either Fast Fuse or Glue Dots.
Your Card is Finished!
Today is my Botanical Blooms class. We are making 4 cards including the two posted earlier this week. I also made another card from some of the pieces. Since I could not decide which ones to post I will show you all three. I will only give brief details for each. They all use the Botanical Blooms Bundle (stamps, Framelits, Designer Series Paper) and one uses the Sale-a-bration Botanical Vellum paper. Have fun!
Card 1 – Three Squares Card
~Hello Honey squares are 2″ and sponged with Cajun Craze.
~The Designer Series Paper squares are 1-3/4″ square and sponged with Cajun Craze.
~The Vellum is 1-3/4″ x 5-1/2″. I laid out all the pieces and attached the squares to the Vellum. I then added adhesive under the squares to attach the Vellum to the Mossy Meadow card base.
Yellow Flower Card
~Hello Honey card base, Cajun Craze layer is 4″ x 5-1/4″. Patterned paper is 3-3/4″ x 5″. Use your stamp and Mossy Meadow ink to stamp lines on the blank leaves on the paper. I thought this was pretty fun.
~Stamp a large leaf lines and a medium leaf lines in Mossy Meadow ink on Mossy Meadow ink. Cut out with the coordinating size Leaf Framelits. Next time I will use Dimensionals under the leaves so they stand out better.
~Cut your Flower and two flower centers from Hello Honey card stock. Attach the centers with Glue Dots. I did not use Dimensionals under the center petals and will add them the next time.
Old Olive and Daffodil Delight Fern Card
~Cut your Daffodil Delight card base.
~Cut your Old Olive card front at 4-1/4″ x 5-1/2″. Cut out Ferns from the front. (I just used the piece I had cut the ferns out of for my class.) Attach it to your card base. I just used SNAIL. Tombow Glue would have been a better choice though.
~The Cajun Craze square is 1-1/2″. The patterned paper square is 1-1/4″. Both are sponged with Cajun Craze ink. These are attached to the card front with Dimensionals.
~The “thinking of you” is from Teeny Tiny Wishes stamp set and punched out with the Word Window Punch. The Daffodil Delight is punched out with the Washi Label Punch. The Botanical Garden Flower Jewel is attached with a Glue Dot.