Wrapped Candy Treat Holder Video

Do you want to make a small candy holder to either give to someone or to put on your holiday dinner table?  Make this quick and easy Wrapped Candy Treat Holder with just a few supplies to wrap any dimensional candy.

This Video is about 7-1/2 minutes long.

SUPPLIES:
Candy from your local store.  I used a small Reese’s candy.
Stamps:  Takeout Treats. Rubber Wood-Mount #147861, Clear-Mount #147858
Ink:  Fresh Fig
Paper:  Nature’s Poem 12×12 Designer Series Paper #146338
Punch:  Scallop Tag Topper #133324
1-1/8″ Scallop Circle #146138
Ribbon:  Metallic Ribbon Combo Pack #146329
Adhesive:  Glue Dots

INSTRUCTIONS:
1.  Determine the size of the paper to cut.  You can use scratch paper or grid paper to help determine the size of paper you need.
~Measure the widest part of your candy, the part you want on the bottom.  In this case 1″.
~Place your candy about 1/4″ from the edge of your scrap paper.  Roll:  top, side, bottom, side, top.  Add 1/4″. Cut.  In this case 5″
~Cut your paper. In this case 1″ x 5″.
~Determine center measurement and width of candy part you want on the bottom.  Candy is about 1″ wide.  DSP is 5″.  Half of 5″ is 2-1/2″.  Since the candy is 1″ wide we want 1/2″ on each side of the center we will score at 2″ and 3″.
~Punch ends with Tag Topper Punch centering before punching.
~Attach your candy to the bottom with 2-3 Glue Dots.
~Cut about 5-6″ ribbon, fold in half.  Put folded part through both punch holes, tighten up DSP ends, twist ribbon so it is standing up, and put both ends through the ribbon loop.  Pull tight.  Depending on how slippery your ribbon is, you can tie it if necessary.
2.  Stamp your sentiment on Whisper White cardstock in Fresh Fig Ink.  Punch out.  Attach to your candy holder with either Mini Stampin’ Dimensionals or Glue Dots.
Your Treat is ready to give away.

Subscribe to my Weekly Newsletter for more Project Ideas.

Get your Treat Wrapping supplies from My Online Store.  Be prepared with a cute small treat for any occasion.

Wrapped Candy Bar Video

This Wrapped Candy Bar Video will give you the basic instructions to wrap ANY SIZE candy bar to give as a treat to someone.

This Video is about 7-1/2 minutes long.

SUPPLIES USED IN VIDEO:
Stamps:  Takeout Treats.  Rubber  Wood-Mount #147861, Clear-Mount #147858
Ink:  Fresh Fig
Paper:  Nature’s Poem 12×12 Designer Series Paper #146338
Whisper White cardstock scrap
Punch:  Classic Label #141491
Adhesive:  Glue Dots
Mini Stampin’ Dimensionals
Other:  Candy Bar
Ruler
Paper Trimmer
Bone Folder

TIPS:
1.  Measure the width of the candy bar you want to cover.
2.  Roll the candy bar on the paper as shown:  side against the edge, top/bottom, side, bottom/top.  Measure to where the edge of the candy bar is and add 1/4″ to 1/2″ to the measurement.  Cut your paper.
3.  Wrap your paper around your candy bar starting with the edge on the center of the bottom side.  Finger press fold lines if desired.  Trim paper if necessary.
4.  Figure out which end of the paper will be on top and put three Glue Dots on that end.  Wrap paper loosely around the candy bar and attach with Glue Dots.  Move candy bar back and forth several times to make sure it will move smoothly.
5.  Stamp sentiment on Whisper White cardstock scrap.  Punch out with Classic Label Punch.  Attach to Wrapped Candy Bar with Mini Stampin’ Dimensionals OR Glue Dots.
Your Candy Bar is ready to give to someone.

Choose your candy bars at your local store. Find your Candy Bar Wrapping supplies in My Online Store 24/7.

Takeout Treat Box

This small Takeout Treat Box is the perfect size for a small treat or gift.  It is also easy to make.  You can decorate it to fit the occasion and the person you will give it to.

This Video is 13 minutes long.

SUPPLIES:
*=Bundle or part of the Bundle.
*Bundle:
 *Takeout Treats rubber stamps + *Takeout Thinlits. Wood-Mount Bundle #149989, Clear-Mount Bundle #149990      (Available as a Bundle until January 2, 2019,)
Stamps:  *Takeout Treats  Wood-Mount #147861, Clear-Mount #147858
Ink:  Blackberry Bliss
Cardstock:  Gorgeous Grape
Highland Heather
Big Shot:  *Takeout Thinlits #147927
Adhesives:  Tear & Tape
SNAIL

TIPS:
1.  After die cutting your two pieces, place them on the table with the score lines facing up.  Also, make sure both pieces are laying in the same position so they will fit together properly.
2.  Fold the score lines by folding the sides or tabs on top of the rest of your cardstock as shown.
3.  Put Tear & Tape on the bottom rectangle of ONE of the pieces.
4.  Flip the pieces over and apply Tear & Tape to the side tabs.
5.  Attach the bottom pieces first as shown in the video.
6.  Attach each side piece as shown in the video.
7.  To close the box: make sure the outside points on the top flaps are always on top of the cardstock as you slide the cut lines and top flaps together.  Practice a few times and it will be easy.

You can make Takeout Treat Boxes for any occasion just by changing the cardstock color, stamping or other decorations:  Birthday, Fall, Halloween, Thanksgiving, Christmas, New Year’s Eve, Valentine’s Day, Easter, Party Favors, Wedding Favors, whatever occasion you can think of.  Or you can give one to someone Just Because.

Speaking of occasions, Sign up for My Newsletter to get my Twelve Weeks of Christmas Newsletter which starts Wednesday, October 3, 2018.  You will get my regular Newsletter on Tuesday, then Wednesday will bring an email with one Exclusive, designed by me, Christmas project.  There will be Four Cards, Four Gifts, Four Packaging projects each with a complete supply list and instructions.  This will be easy to duplicate and make multiples of.  Christmas is such a busy time, so let’s get started early so we can actually enjoy December!