1. Cut your Lovely Lipstick card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″.
2. Cut your Designer Series Paper at 4″ x 5-1/4″. Attach to your card base.
3. Put a 2-1/2″ x 2-1/2″ piece of Multipurpose Adhesive Sheet on the same size Grapefruit Grove Foil Sheet. Cut it out with the Swirly Heart Thinlit. Put a piece of folded printer paper over the foil to keep it smooth.
4. Next cut the large Scalloped Heart out of the Lovely Lipstick Foil Sheet. Yes, the center of the Heart comes out. Take the center of the Heart and emboss it with the Tufted Dynamic Embossing Folder.
5. Stamp the Banner Border in Lovely Lipstick ink on Whisper White cardstock. Next, stamp I Love You or another sentiment in the banner with Lovely Lipstick ink. Cut out with the coordinating Bunch of Banners Framelit.
6. Put it all together.
~Put your Banner on with Stampin’ Dimensionals about 1/8″ to 1/4″ from the top of the Designer Series Paper.
~Attach the Stitched Heart Frame to the card front with dots of Tombow Glue.
~Glue the embossed center Heart inside the Heart Frame sliding it around slightly to cover all the Designer Series Paper underneath.
~Peel the adhesive backing off the Swirly Heart and attach it in the center of the center Heart.
Your Card is finished!
The January Paper Pumpkin Kit can be used for Valentine’s Day. Cute Pillowbox Treat Holders with all the supplies to make them. There are 24 Pillow boxes-enough for a small elementary school class. Starting Wednesday, January 30, my friend Deborah will be making a Paper Pumpkin Alternate project for us. She really enjoys doing the alternate projects.
JANUARY PAPER PUMPKIN KIT
January Paper Pumpkin Kit
Stamp Block G
1. Choose sentiments to stamp on the White die cut Banners. Stamp using the Melon Mambo ink pad. Notice there are two sizes of Banner die cuts.
2. Punch out either a Pool Party Circle or a Heart, and either a Kangaroo or the two Chameleons. Lay out the animal(s) with the sentiment banner to decide where you need to put your adhesive.
3. Attach your sentiment Banner first to either the Pool Party Heart or Circle die cut with the Glue Dots from the Kit.
4. Put Stampin’ Dimensionals on the back of your animal making sure the Stampin’ Dimensionals will only be attached to the Pool Party Heart or Circle die cut.
5. Decorate the Tag with either the die cut Heart and/or the small enamel Hearts.
6. Make your Pillowbox.
~Decide whether you want the red or the Pool Party side to show. Fold all the score lines.
~Attach the adhesive strip to the side flap of the color you want to show.
~Peel off the adhesive backing. Match the side tab score line with the edge line on the other end. Press together firmly and rub with your Bone Folder.
~Fold in the bottom flaps: first the half-circle flap, then the flap with the notch cut out. Put in your treats or small gift.
~Fold in the top flaps: first the half-circle flap, then the flap with the notch cut out. The notch makes it easier to open the flaps.
7. Attach your Animal Tag to the top of the Pillowbox with Stampin’ Dimensionals.
Would you like your OWN Paper Pumpkin Kit in your mailbox every month?
1. Cut your Whisper White card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. Watch this Video to learn more about making a card base.
2. Lay your Valentine Heart stamps and sentiment where you want them on your card front with the rubber touching the cardstock. Lay the large F Stamp Block over all of these stamps. Ink up your stamp. Hold your Stamp Block and stamps over the card base front until they\ stamps are in the position you want them. Put the stamp straight down and press your whole palm over the stamp block area where your stamps are. Press firmly on the Stamp Block for 5 seconds. Gently lift up the Stamp Block.
3. Put the small edge stamp on the G Block and stamp in the places shown.
Your Card is Finished!
Enjoy making your OWN #SimpleStamping Valentine Card!
1. Cut your Lovely Lipstick card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″.
2. Choose the Rectangle Stitched Framelit that is just wider than your Heart Stamp. Cut it out from Whisper White cardstock.
3. Lay our your Heart and sentiment stamps on your Whisper White Stitched Rectangle. Then, mount both stamps on the same Stamp Block. Stamp them with Lovely Lipstick ink. Add Stampin’ Dimensionals to the back.
4. Cut your Gold Foil Sheet at 2-1/2″ x 3-1/4″. Add Stampin’ Dimensionals to the back. Layer this Gold Rectangle with the stamped Rectangle.
5. Big Shot
The measurements listed are for BOTH the cardstock AND the Multipurpose Adhesive Sheet which you will put on the back of the cardstock. Watch This Video if you need help using Multipurpose Adhesive Sheets. Watch This Video if you need help cutting detailed Framelits/Thinlits.
~Gold Foil Sheet: 1″ x 2″.
~Powder Pink cardstock: 3-1/2″ x 4-1/4″
~Cut two of the small flowers from the Gold Foil.
~Cut two of the Many Hearts Strips from the Powder Pink cardstock. Poke out all the Hearts and save them for another project as they are all stickers.
6.Put your card together.
~Put on the Many Hearts Strips first so they go diagonally across the card letting some hang off each corner. Cut off the parts that hang over the edge.
~Put a Gold Foil Flower in each of the other two corners.
~Put the Layered Rectangles in the center of the card.
Your Card is Finished!
I love this Three Hearts Card Kiev made! I Love the NEW Meant to Be Bundle with the Be Mine (Heart) Framelits & Thinlits!! Kiev designed this card using three of the Filigree Heart Thinlits and the NEW Rectangle Stitched Framelits and some Designer Series Paper. This card can be used for any “Love” Occasion.
1. Cut your Real Red card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″.
2. Cut two 1-3/4″ x 3-3/4″ Stitched Rectangles using the Rectangle Framelits. Attach to card base as shown in the photo.
3.Watch This Video if you need help using the Multipurpose Sheets. Watch This Video for help cutting detailed Thinlits.
4. Lay your Heart Thinlit the back of your Silver Foil paper to decide how much you will need. Cut your Multipurpose Adhesive Sheet and Silver Foil the same size. Put the Multipurpose Adhesive Sheet on the back of the Silver Foil Sheet. Cut out one Heart
Big Shot Sandwich:
1. Big Shot Platform with Thin Die Adapter on (OR Multipurpose Platform with all tabs closed)
2. Bottom cutting plate (The flatter it is the better results you will get.)
3. Foil Sheet with adhesive sheet down
4. Heart Thinlit with cutting edges touching Foil Sheet
5. Printer Paper folded in half covering the Foil Sheet to keep it smooth and pretty looking
6. Add the Top cutting plate
5. Lay out the Hearts where you want them. Peel off the adhesive backing and put the Hearts on the card.
~Attach the Hearts on the sides first.
~Then she put the center Heart down overlapping the side Hearts.
Your card is finished.
INSTRUCTIONS: 1. Cut your Blushing Bride card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Stamp My Valentine in Real Red ink on Whisper White cardstock. 3. Go to your Big Shot:
~Cut out My Valentine with an Oval Stitched Shape Framelit.
~Cut out the Heart from Real Red cardstock. Remove the excess pieces with either the Big Shot Die Brush or a Piercing Tool or a toothpick.
~Cut from Whisper White cardstock: 2 large flowers and three small flowers using the Flower dies in the Bloomin’ Heart Thinlits. Save the Whisper White cardstock you cut them from. 4. Back at your table….. Get your Stamp-a-ma-jig Imaging Sheet and T-Handle. Stamp the large flower in one corner and the small flower in another corner.
~Use a marker to color the Whisper White cardstock you cut the flowers from. Color around the cut out flower images. This will make it easier to see your White Flowers.
~Put your Flowers back in their holes. Use your Stamp-a-ma-jig to line up the flower stamp with the die cut. Remove the imaging sheet and stamp with Real Red ink. Repeat with the remaining flowers.
~Glue the Flowers onto the Heart over the coordinating size flower part. You could also attach the Flowers with Stampin’ Dimensionals if desired. 5. Lay out the Heart and the Oval in the desired positions on your card base.
~Use Tombow Glue to attach the Heart.
~Use Stampin’ Dimensionals to attach the Oval Sentiment.
Get your all-occasion Card Making supplies from My Online Store. If you order from me I will email you a FREE Tutorial!
~Cut at 3″ x 4-3/4″.
~Score at 1/2″, 3/4″, 2-3/4″, 3″ 2. Attach two Glue Dots close to the 1/2″ score line on the lower flap and two Glue Dots towards the top back of the candy. Attach the candy to the lower flap first, then to the back. Fold top flap over and tuch inside the lower flap. 3. Decorate for the occasion. These are for Valentine’s Day. Stamp the Heart in Real Red Ink on Whisper White cardstock. Then stamp one of the other sayings inside the heart. I used a Stamp-a-ma-jig to help me position my stamp inside. Cut out with the Heart Framelit. The Heart Framelin in the Mini Treat Bab Thinlits fits perfectly. The Sweet & Sassy Heart Framelit is close to perfect, but not the exact shape.
Happy Candy Giving! You can get all the supplies to make these Matchbook Candy Holders from My Online Store. You will need to get the candy from your local store.
INSTRUCTIONS: 1. Cut your Thick Very Vanilla card base at 5-12″ x 8-1/2″. SCORE and fold at 4-1/4″. 2. Cut your patterned paper at 4″ x 5-1/4″. Run through your Big Shot with the Sweethear embossing folder. Use the coordinating Sweet & Sassy Heart Framelit to cut out the center heart. While at your Big Shot, cut out the Celebrate from Elegant Eggplant cardstock. Glue onto the bottom of the DSP. 3. Cut a Window Sheet at 3-1/2″ x 3-1/2″. Attach to the back of your DSP Heart cut out with SNAIL around all four sides. 4. Attach Foam Adhesive Strips on the DSP back about 1/8″ from the edge of the Heart cut out. Make sure there are NO gaps in the Foam Adhesive Strip otherwise the Gold Flakes will escape and get everywhere! Also put the Foam Adhesive Strips around the edge of the card.
NOTE: If you do not want the Gold Glitter Flakes to stick to the inside of the Foam Adhesive Strips, either run your fingers along the adhesive sides or run your Embossing Buddy along the sides to remove the sticky there. I personally like the Gold around the Heart edges so I didn’t do this. 5. Lay your DSP on your card base to determine where to put your pile of Gold Glitter Flakes. Remove the DSP. Put your Gold Glitter Flakes on the card base in the center of where the Heart will cover. Remove the Adhesive backing and put on your card base. Press firmly. Now you can “test” out to see if the Shaker Card works. 🙂
Your card is finished. 6. Envelope options: Use the Embossing folder on the envelope flap.
This would be a great Valentine Card for your favorite guy! Most guys (and some gals) love wood and nature. So make this card with the fun Wood paper and this stamp set with a Tree stump. You can replace the retired (oops!) Jute Twine with the 1/4″ Copper Trim or Linen Thread.
INSTRUCTIONS: 1. Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″.
NOTE: I just did this all on the card base. When you use Blends to color, the color will bleed though your cardstock. SO either color with your card base open OR if you do not want the bleed through to show, cut a Whisper White card front at 4-1/4″ x 5-1/2″. Do everything to the card front, then attach it to the card base. Instructions are for just the card base with no additional card front. My son thought the bleed through was an additional feature of the card. 2. Cut your Wood Textures DSP at 2″ x 6″ with the pattern you want on your card. Attach to your card base with Fast Fuse. Trim excess from top and bottom. 3. Stamp your Tree Stump in Early Espresso ink overlapping your Wood paper. Lay your card base open and flat on a piece of scratch paper. Color the Tree stump around the bottom edges and left side and the bottom of the oval at the top with the Crumb Cake Dark Blends Marker. Color the rest of the Tree Stump with the Crumb Cake Blends Marker blending the darker Crumb Cake. Now color some grass with the Old Olive Blends Markers. I then used the Thin tip of the Crumb Cake Dark Blends to color the tree trunk next to the grass. 4. Stamp Forever at an angle in Real Red ink. Stamp two of the Heart Confetti also in Real Red ink. 5. Place 4 Glue Dots along the border of the Wood paper. Attach your Jute Twine or Linen Thread. Use SNAIL on the back of the Copper Trim to attach it to the card base. Trim excess.
Your Card is Finished. 6. Envelope: You can stamp the round wood stamp on your envelope. Use regular Stampin’ Write Markers to color it if desired.
~You could also emboss the flap with the Pine Planks Dynamic Embossing Folder. Watch this Video to learn how.
I am not normally a Black Valentine person, but these Paper Pumpkin cards turned out pretty cute. I think I will need to make a template for them….. For the Alternate cards I also used Sweet & Sassy Framelits (with my Big Shot), and Flirty Flamingo cardstock. All other items used were included in the Kit.
ORIGINAL CARDS INSIDE LEFT CARD INSIDE RIGHT CARD
ALTERNATE CARDS Left Card: Sweet & Sassy Framelits, Flirty Flaming cardstock, Berry Burst ink sponged around Heart. Vellum die cut is cut in half and attached behind heart with Glue Dots. Right Card: Use Whisper White insert from Kit, Heartfelt Blooms stamp set. Only attach the Insert to the top half/part of the card flap.
INSIDE LEFT CARD:
Sweet & Sassy Framelits, Flirty Flamingo cardstock
INSTRUCTIONS: 1. Cut your Pink Pirouette card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Lay your strip of Hearts sticker 3/8″ from the bottom edge of your card base. 3. Choose two pieces of DSP and cut at 1″ x 4-1/4″. Punch one end of each strip with the Banner Triple Punch. Sponge around the edges with Soft Suede ink. Choose which one will be on the bottom. Attach with Fast Fuse. Trim excess off the card top and sponge the DSP top. Decide how long the second strip will be. Attach with Fast Fuse at the top and Mini Dimensionals on the sides and tips. Trim off excess from top and sponge top of DSP strip. 4. Attach the Love sticker at the top of the card. Then attach the Heart. This Heart is actually two stickers, so separate them and attach one at a time.
Your Card is finished!
Here is an I Love You card you can use for Valentine’s Day. It is for Sketch Challenge #12 which posted on Saturday on Facebook . I decided to make two versions of this Sketch. I will post the secone card on Wednesday. Hope these cards give you some inspiration for your own cards and projects.
INSTRUCTIONS: 1. Cut your Thick Very Vanilla card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″. 2. Attach your Berry Burst Ribbon by running a strip of Fast Fuse 1-3/4″ from the bottom edge. Lay your Ribbon over the Fast Fuse. Trim the excess from the sides. 3. Choose two patterns of Designer Series Paper and cut a 1-1/2″ x 4-1/4″ strip of each. Punch one end of each strip with the Banner Triple Punch. Sponge around the edge with Berry Burst ink. Decide which will go on the bottom. Decide what the length will be. Attach it with Fast Fuse. Trim off the excess from the top and sponge the edge of the strip. Decide how short the second strip will be. Use Fast Fuse on the top edge and Mini Stampin’ Dimensionals on the sides and tips. Attach, trim top, and sponge top. 4. Now for the Hearts. Choose the size of Heart Framelits you want. Cut the larger one from Berry Burst cardstock and the smaller one from Pink Pirouette cardstock. Sponge around the edges of both hearts with Berry Burst ink. Stamp your words in Berry Burst ink on the Pink Pirouette heart. Attach the Berry Burst Heart with Fast Fuse. Attach the smaller Heart with Mini Stampin’ Dimensionals.
Your Card is finished!
We tested out my NEW Stamparatus for both these cards. You can order yours in June.
The Party Pandas looked best with 2-3 layers of ink which was super easy to do with the Stamparatus. I also used the Color Theory Designer Series Paper for the Bamboo stalks and the leaves are from the Everyday Jars Framelits.
The Lovely Wishes card also used the Stamparatus. We placed the two flower and leaf stamps on one side, then stamped, then rotated the card front and stamped again. We also lined up the Happy Wishes stamps in the Stamparatus and stamped it. We again colored with Blends Markers.
INSTRUCTIONS: 1. Cur your Real Red card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Whisper White card front at 4″ x 5-1/4″. 3. Stamp your Flower Arch image and Love You Yesterday sentiment in Memento Black ink. Stamp the I Love You in Real Red ink. 4. Although there are two-step stamps for the Arch, flowers and leaves, I chose to color the images with my Blends Markers. Make sure you have at least 1-2 layers of scratch paper under your cardstock when coloring as there will be bleed-through of the Blends inks.
~Crumb Cake Dark along the left sides of the wood. Crumb Cake Light to color in the rest and blend out the lines.
~Old Olive Dark and Light for the leaves.
~Daffodil Delight Dark for the center of the large flower. I had accidently colored the center with the Cherry Cobbler Dark. I used my Color Lifter to remove the color, then colored the center with Daffodil Delight Dark. So I am having you do the Daffodil Delight first.
~Cherry Cobbler Dark for the large flower with the Daffodil Delight center.
~Cherry Cobbler Light for the other three flowers. 5. Attach your colored card front to your card base.
INSTRUCTIONS: 1. Cut your Pink Pirouette card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Pink Pirouette card front at 4-1/4″ x 5-1/2″. 3. Big Shot:
~Run your Pink Pirouette card front through with the Sweetheart embossing folder.
~Cut out five Hearts from the Rich Razzleberry ombre Color Theory DSP. Tyr to get at least the larger hearts so they show lighter and darker color on the same heart. Make sure they will fit on your card front.
~Stamp the Banner in Sweet Sugarplum ink on Whisper White cardstock. Stamp the words in Rich Razzleberry ink. Cut out with the coordinating Banner framelit. (Or you can just cut it out like I did. My Banner Framelits were in hiding at the time.) 4. Assemble your card.
~Lay out the die cut hearts and banner on your embossed card front. Yes, I did mostly cover the heart shape in the center.
~Glue the Hearts directly onto the card front.
~Attach the Banner with Stampin’ Dimensionals.
~Glue the card front onto your card base.
Your card is finished. 5. If desired, emboss your envelope flap with the Sweetheart embossing folder.
INSTRUCTIONS: 1. Cut your Real Red card base at 5-1/2″ x 6-1/2″. Score and fold at 4-1/4″. 2. Cut your patterned paper at 4″ x 5-1/4″. 3. Prep all the pieces:
~Stamp Happy Valentine’s Day in Real Red ink on Whisper White card stock. Cut out with the desired Sweet and Sassy Heart Framelit.
~Cut the Heart Border from a 1″ x 6″ piece of Real Red card stock
~Cut the opening Heart from Real Red card stock.
~Cut the two Arrows from the Silver Foil Sheet. Put a folded sheet of printer paper over the foil sheet to protect it from getting marks transferred from your cutting pad.
~Sponge around the Whisper White Heart with Real Red ink if desired. 4. Lay out all the pieces where you want them. Attach. I used Tombow glue to attach everything. Trim off the edges of the Heart Border strip if needed. 5. Brush some Clear Wink of Stella onto all the red Hearts to add some sparkle. Let dry. 6. If desired, cut a 4″ x 5-1/4″ piece of Whisper White card stock to put on the inside to write on. Use a few stamps to decorate the edges.
INSTRUCTIONS: 1. Cut your paper into four 2-3/4″ squares. Attach to sides. Cut 1″ strips for the top. Attach the first strip diagonally down the center, then a strip on each side leaving a white strip in between each patterned strip. 2. Sponge around the edges in Real Red ink if desired. 3. Punch out the Bow Builder Punch twice from Red Glimmer Paper. Put together with Glue Dots. Attach to the lid with Glue Dots. 4. Stamp My Valentine in Real Red ink on Whisper White card stock. Cut it out with one of the Large Tags and Labels tag framelits. 5. Cut 6″ of each the Real Red and Whisper White ribbon. Put together and fold in half. Put the fold through the tag hold and put the ends through the loop formed by the fold. Pull tight. Trim ribbon ends. 6. Attach tag to box with Stampin’ Dimensionals. 7. Fill with treat or small gift.
Have fun giving out your Valentine Treats and Gifts in this Valentine Box.
INSTRUCTIONS: 1. Cut your Real Red card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your patterned paper at 4″ x 5-1/4″. Wait to attach to card base until it is all decorated. 3. Decorate:
~Attach 3 rows of ribbon to the front with SNAIL. You can either run the SNAIL on the card front or on the back of the ribbon. Wrap the ends around to the back and attach with SNAIL.
~Cut out the Gold Glimmer Paper with the Bloomin’ Heart Thinlit. It works best if you put the die on the white back of the Glimmer Paper to cut it out.
~Cut out two large flowers and three small flowers with the Flower Thinlits in the Bloomin’ Heart Thinlits.
~Put a Stampin’ Dimensional on the back of the flower shapes on the Gold Glimmer Paper Heart die cut.
~Put a Stampin’ Dimensional on the back of each Real Red flower .
~Stamp the Banner and greeting in Real Red ink on Whisper White card stock. Cut out with scissors. Put Stampin’ Dimensionals on the back. 4. Lay out all the pieces where you want them, then attach. 5. Add the White Perfect Accents to the center of the flowers. 6. Tie a bow and attach it with either Glue Dots or Tombow Glue. 7. If desired add a 4″ x 5-1/4″ piece of Whisper White to the inside of your card to write on.
INSTRUCTIONS: 1. Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″. 2. Cut your Sending Love paper at 4-1/4″ x 5-1/2″. Attach to card base. 3. Stamp in Real Red ink on Whisper White card stock:
~Happy Valentine’s Day
~First Sight heart 4. Cut out:
~The heart you stamped with either the Sweetheart Punch (shown) or one of the Sweet and Sassy Framelits. Sponge around the edges with Real Red ink.
~The heart from the Sending Love paper with either the Sweetheart Punch (shown), a Sweet and Sassy Framelit, or fussy cut it.
~Happy Valentine’s Day with the Stitched Shapes Circle Framelit. Sponge around the edges with Real Red ink.
~The Heart Strip: Cut Real Red card stock at 1-1/2″ x 5-1/2″. Place the straight edge of the Heart Strip Framelit and run through your Big Shot. 5. Assemble. Lay out all the pieces on your card front in the position you want them. Attach:
~The Heart Strip with Tombow Glue
~The Heart cut outs and the Happy Valentine’s Day with Stampin’ Dimensionals.
~Tie a bow with the Real Red Sending Love Ribbon. Attach it with 2-3 Glue Dots. 6. Decorate your envelope by stamping some of the heart stamps on your envelope front and/or flap.
Enjoy making this Lots of Hearts Valentine’s Day Card
Search Nendy’s Site
Sign up for my Newsletter
April Host Code
Current Stampin’ Up! Catalogs
Get your OWN Paper Pumpkin monthly Craft Kit!
Everything on the Blog and Website is made by me, Nendy Kerr, unless stated otherwise. Stampin’ Up! does not endorse the content on these pages. Thank you for visiting!