INSTRUCTIONS: 1. Cut your Soft Sky card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. Put your card front in the Polka Dot embossing folder with the card back on the outside behind the embossing folder. Make sure the dots for the card front are sinking down so they will be raised when you are finished. 2. Cut a 1″ x 5-1/2″ piece of Cucumber Crush card stock. Put Tear & Tape along one 5-1/2″ edge. Use your Fringe Scissors to cut “grass” down to the Tear & Tape. Attach to the lower edge of your card front. 3. Cut out your Bunny Head and Ears from Whisper White card stock and Oval Framelits. I used the smallest Oval for the ears. Choose the size you want for the Head. 4. Assemble your Bunny.
~Punch two Pink Pirouette Large Ovals for the inside of the ears. Glue to the Whisper White ears. Let dry for while your find your Decorative Dots embossing folder. Lay both ears in the Embossing Folder and run through your Big Shot.
~Punch two Basic Black 3/4″ Circles for the Bunny Eyes.
~Punch the Itty Bitty Accents Heart from Pink Pirouette card stock for the nose.
~Lay the Bunny Head on the bottom right corner of your card front at a slight angle. It should extend off the card front a little on both the side and the bottom.
~Lay the eyes and the nose on the Bunny Head. Position the ears where you want them, making sure the one will not extend over the card base.
~Attach the parts: Ears with Glue Dots or Tombow Glue. Eyes with Tombow Glue. Draw the white eye parts with your White Gel Pen or Chalk Marker.
~Remove the nose and draw the whiskers and the mouth with your Basic Black Marker.
~Attach the Heart Nose with a Stampin’ Dimensional cut in half. You might have to cut off a little bit. 5. Attach your Bunny to your card front with lots of Dimensionals. Make sure the one ear is touching the top of the card. Place your Bunny at an angle. 6. Stamp Happy Easter with Black ink onto Whisper White card stock. Cut out with the Word Window Punch. Use the Washi Label Punch to punch a Label from Cucumber Crush card stock. Attach the two together with Stampin’ Dimensionals. Attach to the card with Stampin’ Dimensionals.
INSTRUCTIONS: 1. Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. Watch this Video to learn more about card bases. 2. Cut your Melon Mambo card stock at 3″ x 4-1/4″. Run through your Big Shot with the Modern Mosaic embossing folder. Glue to card base. 3. Cut your Bermuda Bay card stock at 2-1/2″ x 4-1/4″. Run through the Big Shot with the Lucky Stars embossing folder. Glue on top of your Melon Mambo layer. 4. Stamp the leaves image in Garden Green ink on Daffodil Delight card stock. Cut out with scissors. Set aside. 5. Stamp the Butterfly in Melon Mambo ink on Whisper White card stock. Cut out with scissors. Set aside. 6. Stamp your “Awesome” sentiment in Garden Green ink on Whisper White card stock. Punch out with the 1-3/4″ Scallop Circle Punch. 7. Use your 2″ Circle Punch to punch a Daffodil Delight circle. 8. Lay out all your pieces in the positions you want them. Attach the Leaves with Tombow Glue. Attach the Butterfly with Glue Dots. Attach the Punched Circles with Stampin’ Dimensionals. 9. Tie a bow with the Bermuda Bay Baker’s Twine. Attach it by putting a Glue Dot behind the knot and squishing in the Glue Dot so it is covered by the knot. 10. Hope you had fun! Now make YOUR OWN Version!
I taught a Mother’s Day card class Thursday for the 8-11 year old Achievement Day girls from Church. They each received a packet for a Melon Mambo card and a Perfect Plum card. Here are the samples using the Petal Potpourri Bundle (stamp set and punch). They had a fun time being creative and did well with cleaning their stamps when they were done using them. I did explain they were using “Grown-up Glue” and that they did not need to use very much. We only had two girls that forgot. Hopefully their mothers can open their cards.
BASIC INSTRUCTIONS: 1. Card stock. Choose your colors. A. Perfect Plum and Whisper White, OR B. Melon Mambo and Pink Pirouette. OR C. Choose your own color combination.
~card base cut at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″.
~card front for use with embossing folder is cut at 4-1/4″ x 5-1/2″.
~Pink Pirouette and Whisper White for stamping and Punching.
~Silver Glimmer Paper. Punch a 3/4″ circle for each flower center if desired. 2. Run your card front through the Big Shot with an embossing folder if desired. Glue to your card base. 3. Stamp the flowers and the sentiment. Punch them out. Glue them on your card in the desired positions. Glue your Silver Glimmer Paper circles to the Flower centers if desired.
INSTRUCTIONS: 1. Cut your Bermuda Bay card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. Watch this videofor more details on Basic Card Bases. 2. Cut your Coastal Cabana card front at 4″ x 5-1/2″. Stamp your Awesome sentiment using Island Indigo ink. Run through your Big Shot with the embossing folder. Set aside. 3. Stamp your flower with Island Indigo ink on both Coastal Cabana and Bermuda Bay card stock. Punch out. If desired, curve you flowers with your Bone Folder by curling 3 petals at a time. Rotate so you have 1 petal from the last three and two new petals. Continue until you like how your flower looks. Attach on top of Bermuda Bay flower with Dimensionals. Punch out a 7/8″ Scallop Circle from the Dazzling Diamonds Glimmer Paper and attach to the center of your flower with a Dimensional. 4. Decide where to put your flower and where you want your ribbon. Tie Ribbon and trim ends if needed. Attach Flower in desired position. Now attach card front to card base with Fast Fuse adhesive or Tombow Glue. 5. Now give to someone to let them know you think they are awesome!
We made this card at one of my classes using the Fun Frames and Decorative Dots Embossing Folders and the Sponging the Embossing Folders technique. This monochromatic card is in Pacific Point. Choose the color you are in the mood for when making your own version of this card.
INSTRUCTIONS: 1. Cut your Pacific Point card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your card front at 4″ x 5-1/4″. Run through your Big Shot with the Decorative Dots Embossing Folder. Drag the edges along your Pacific Point ink pad. Attach to your card base with Tombow Glue. 3. Get a piece of Whisper White card stock to use for your Fun Frame. Sponge the side of the embossing folder where the dots sink in making sure to cover the raised area. (Watch this Video for more details.) You can leave some white inside the frame if desired. Put your card stock on the side you did not sponge and gently close the embossing folder and run it through your Big Shot. Remove the embossed card stock. Clean your folder with either running water, Stampin’ Mist, or a baby wipe. Dry with a paper towel. Fussy cut around your Fun Frame. Attach to card front with Dimensionals. 4. Attach Rhinestones as desired.
TIPS: 1. Attach the Burlap Ribbon embellishment to you card with Tombow Glue on the 1/4″ edges of the ribbon. Trim off excess ribbon. 2. Thread the button with one of the ribbon strands you removed. Attach the Button with Glue Dots.
The new Fun Frames embossing folders make a great focal point for any card. I used the Decorative Label shaped one on this card. It is much larger than I thought. I even used a couple of different techniques on this card. Enjoy making one for yourself or a friend.
INSTRUCTIONS: 1. Cut your Tempting Turquoise card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. Watch this videofor detailed card base instructions. 2. Cut your Tempting Turquoise card front at 4″ x 5-1/4″. Run through your Big Shot using the Decorative Dots embossing folder. Use a Sponge Dauber (or Stamping Sponge) inked with Tempting Turquoise to lightly color the raised dots. You can darken the edge with either the Sponge Dauber or just run the edge against your ink pad. Watch this video for more instructions. 3. Ink your Sponge with Melon Mambo ink and sponge the inside of your Fun Frames embossing folder (the part with the Sizzix and Stampin’ Up! logos). Carefully place your Whisper White card stock inside the Embossing Folder, being careful to not move the card stock. Now Run through your Big Shot. Take out your Frame and see how nicely all the details show up. Cut the frame out leaving about 1/8″ to 1/4″ border around the Frame. Attach to your card front with Dimensionals. Clean your embossing folder by running under water or use Stampin’ Mist and a tissue or paper towel. 4. Cut your Little Letters “H” and “I” out of Whisper White card stock. Lightly sponge with Tempting Turquoise ink before removing them from the dies. Just use a stylus or toothpick to help remove them by pushing through the little circles. Attach the letters inside your Frame with Tombow Glue. I punched out the star from my first version of sponged Tempting Turquoise card stock that was embossed with the Decorative Dots embossing folder. Attach with a Glue Dot or Tombow Glue. 5. Tie two bows with the Strawberry Slush Thick Baker’s Twine. Trim ends the desired length either now or after they are attached to the card. Place a Glue Dot behind the knot and adhere it into the desired position. Repeat with the other bow. To adhere the ends of the bow, use your Paper Piercing Tool to scrunch up a Glue Dot so it forms a thin line. Now attach the end of the Baker’s Twine to the Glue Dot and position as desired. Repeat with the rest of the ends. 6. Admire your Fun Frame card before giving it away. If you would like you can emboss the envelope flap. Watch this video for instructions.
This Banner Card uses the Perfect Pennants Bundle from the NEW Occasions 2014 Catalog and the Decorative Dots Embossing Folder from the Sale-a-bration 2014 Catalog. If you purchase a Bundle you save 15% than if you buy each item separately.
Buy the Wood Mount Bundle and some Dimensionals and earn the Decorative Dots embossing folder for FREE during Sale-a-bration!! January 28-March 31, 2014.
You could also get the Clear Mount Bundle and either 2 ink pads or 2 packages of card stock or 1 package of Designer Series Paper to add up to the $50 requirement to earn a FREE Sale-a-bration product!
INSTRUCTIONS: 1. Cut your Wisteria Wonder card base at 5-1/2″ x 8-1/2″. Score and Fold at 4-1/4″. 2. Cut your Elegant Eggplant card front at 4-1/4″ x 5-1/2″. Run through your Big Shot with the Decorative Dots embossing Folder. Adhere to card base with Tombow Glue. 3. Adhere Whisper White Ribbon to Elegant Eggplant card front to form a frame. Mine is about 1/4″ from the edge. I used SNAIL on the back or the Ribbon so it would stick to the card stock. 4. Stamp the desired sentiment or image on Wisteria Wonder card stock. Cut out with the coordinating size Banner Framelit. Cut the next larger Framelit with Perfect Plum card stock. Put Dimensionals on the back of both Banners, layer them, and adhere to the center of your card front. 5. A nice card to brighten someone’s day.
Happy Stamping! Nendy Kerr
Search Nendy’s Site
August Host Code
Sign up for my Newsletter
Current Stampin’ Up! Catalogs
Get your OWN Paper Pumpkin monthly Craft Kit!
Everything on the Blog and Website is made by me, Nendy Kerr, unless stated otherwise. Stampin’ Up! does not endorse the content on these pages. Thank you for visiting!