Christmas Lights always make me feel happy-especially colored Christmas Lights. I used the Making Christmas Bright Bundle which comes with a Punch, Use your favorite Christmas Lights colors for your version of this card. This card does take a little time.
I CASED this from the 2018 Holiday Catalog on Page 6. (CASE=Copy And Share Everything) You will notice that I changed a few things.
SUPPLIES: Bundle #149947: Making Christmas Bright Photopolymer stamp set + Christmas Bulb Builder Punch Stamps:Christmas Pines Photopolymer #142049 Inks: Shaded Spruce
Call Me Clover
Pacific Point Cardstock: Whisper White
Smoky Slate Adhesives: Mini Stampin’ Dimensionals
Tombow Glue or Glue Dots
INSTRUCTIONS: 1. Cut your Real Red card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Whisper White card front at 4″ x 5-1/4″. 3. Stamp your Pine Branches all over the card front with Call Me Clover ink. I stamped the corners first then stamped some partial branches in the white spots. 4.Light Bulbs. Stamp your Light Bulbs
~Real Red ink for the Light Bulbs with words
~3-4 Shaded Spruce Light Bulbs
~3-4 Pacific Point Light Bulbs
~Punch out the Light Bulbs.
~Punch the Light Bulb topper (Small part of Punch) from a 1/2″ strip of Smoky Slate.
~Attach the Light Bulb Toppers to the Light Bulbs with either Tombow Glue or a Glue Dot.
~Put two Mini Stampin’ Dimensionals on the back of each Light Bulb.
~Lay out the Light Bulbs on your card front branches. Attach. 5. Attach your completed card front to your Real Red card base.
Your Card is finished. 6. Optional Envelope: Stamp either Branches or Light Bulbs on your envelope flap.
INSTRUCTIONS: 1. Cut your Call Me Clover card base at 501/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Granny Apple Green card front at 4″ x 5-1/4″. Run through the Big Shot with the Corrugated embossing folder. Attach to card base with Tombow Glue. I laid two E Stamp Blocks on top to help the glue attach the Corrugated card front to the card base. It just was not staying down by itself. I was not patient enough to hold it down with my hands. 3. Stamp your sentiment on Lemon Lime Twist cardstock with Call Me Clover ink. Cut it out with an Oval Stitched Shape Framelit. 4. Cut out the largest Stitched Labels Framelit from Call Me Clover cardstock. 5. Layer the sentiment and the Label with Stampin’ Dimensionals. Attach to card front with Tombow Glue. Again, lay the blocks over the top for a few minutes.
Your Card is finished.
INSTRUCTIONS: 1. Cut your Daffodil Delight card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Whisper White cardstock at 4″ x 5-1/4″. Round the corners with the Detailed Trio Punch. Stamp one of the Three Leaves with Pumpkin Pie in the upper right corner. 3. Cut your Whisper White label at 1-7/8″ x 2″. Stamp your sentiment with Pumpkin Pie ink. Round the corners with the Detailed Trio Punch. Color the edges with the Gorgeous Grape Marker. Put Stampin’ Dimensionals on the back. 4. Die Cut:
~Large Leaf from Gorgeous Grape cardstock
~Two Long Leaves from Daffodil Delight cardstock.
~Lay out your sentiment and your leaves on your Whisper White card front. Attach Leaves with Tombow Glue.
~Attach your sentiment with Stampin’ Dimensionals lining up the edges and the rounded corner.
Your card is finished.
Happy Thanksgiving Week! I hope you are celebrating with Family and Friends. Remember to tell them you love and appreciate them. Kiev made this card with a current stamp set (Painted Harvest) and a sneak peek 2019 Occasions Catalog stamp set (Artfully Aware). #SimpleStamping cards use just stamps, ink, and paper and maybe punches.
~ Crumb Cake card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″.
~Whisper White at 3/4″ x 2-5/8″
~Crushed Curry at 2-1/8″ x 2-7/8″ 2. Stamp your Flowers directly on your card base.
~Large Flower in Crushed Curry. Ink and stamp once in Crushed Curry. Ink again with Crushed Curry ink, rotate stamp 180 degrees and stamp again. Repeat so you will have several flowers on your card front.
~Small Flower in Crumb Cake ink lining up the center of the flower with the stamped image below. 3.Stamp your family image on Whisper White card stock with Soft Suede ink. Put Stampin’ Dimensionals on the back and attach to Crushed Curry cardstock. Decide where you want to put it on your card front. Attach with SNAIL.
Your Card is finished. 4.Optional Envelope: Stamp a flower on the front lower left corner and envelope flap.
These are the cards I used for my Swaps (Cards to Trade with others) at OnStage last week. They are all the same layout. They just use different Designer Series Papers (DSP) and coordinating cardstock. I pre-cut the cardstock and the 3″ x 4-1/4″ DSP. In just an hour my three friends cut the DSP diagonally and assembled the cards. I punched, then stamped the sentiments using my Stamparatus so I could stamp two sentiments at once with different colors of ink. We were surprised at how quickly the cards were finished. I will put the paper and ink information under each photo. Nature’s Poem DSP #146338, Powder Pink card base, Blackberry Bliss card front, and ink, Under the Mistletoe DSP #146921, Early Espresso card base, Shaded Spruce card front, and ink.
SUPPLIES: Stamps: Happy Birthday Gorgeous Photopolymer #
Eastern Beauty Photopolymer # Cardstock and Designer Series Papers of your choice or as listed above
Coordinating ink of your choice or as listed above Punch: Everyday Label # Adhesives: Tombow Glue
INSTRUCTIONS: 1. Cut your Papers.
~card base at 5-1/2” x 8-1/2”. Score and fold at 4-1/4”.
~card front at 4” x 5-1/4”.
~DSP layer at 3” X 4-1/4” Cut diagonally by lining up opposite corners with the cutting groove on your Paper Trimmer. 2. Attach your diagonally cut DSP to your card front trying to keep the borders of both DSP pieces so the card front borders are about the same. 3. Attach your card front to your card base. 4. Label.
~Stamp your sentiment on Whisper White cardstock in coordinating ink. Punch out with the Everyday Label Punch.
~Attach label with Stampin’ Dimensionals to your card front.
Your Card is finished.
Time for another Love Your Stamps Challenge. This one uses Kiev’s favorite stamp set-Beautiful You. Choose your favorite stamp set and make at least one card. SUPPLIES: Stamps: Beautiful You Rubber Wood-Mount #143004, Clear-Mount #143637 Ink: Memento Black
Shaded Spruce Stampin’ Blends:Shaded Spruce Combo Pack #147938 Darke Crumb Cake #144581 Cardstock: Thick Whisper White
Share What You Love 12×12 Designer Series Paper (DSP) # Adhesive: SNAIL
INSTRUCTIONS: 1. Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″. 2. Stamp:
~your lady in Memento Black ink at the far right of your card base front.
~Celebrate in Shaded Spruce Ink
~Scribble stamp in Petal Pink ink 3. Color the hat with the Dark Crumb Cake Blends Marker.
~Color the dress with the Shaded Spruce Blends Markers. 4. Cut your DSP at 3″ x 4-1/4″. The 3″ edges go on the top and bottom. Pay attention to this when cutting paper that has a design that has an up and down. Attach to your card base.
~Cut your So Saffron at 3/8″ x 4-1/4″. Attach to your card front overlapping your DSP slightly.
Your Card is finished.
INSTRUCTIONS: 1. Cut your Thick Very Vanilla card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″. 2. Stamp leaves in Calypso Coral ink on the card base front. I stamped the large leaf first, then filled in the empty spaces with the small leaf. 3. There are two ways you can do this.
~Stamp Many Blessings in Black ink on Very Vanilla cardstock. Stamp your large leaf in Cajun Craze ink. Cut out with a Layering Circle Framelit.
~Cut out the Layering Circle Very Vanilla Circle first, then stamp the words in Memento Black ink and the large leaf in Cajun Craze ink. 4. Choose the Scallop Circle Framelit just larger than the Circle Framelit you used. Cut this from Cajun Craze cardstock. Layer the two circles together with SNAIL. Attach to card front with Stampin’ Dimensionals.
Your Card is finished.
Do you want to make a small candy holder to either give to someone or to put on your holiday dinner table? Make this quick and easy Wrapped Candy Treat Holder with just a few supplies to wrap any dimensional candy.
INSTRUCTIONS: 1. Determine the size of the paper to cut. You can use scratch paper or grid paper to help determine the size of paper you need.
~Measure the widest part of your candy, the part you want on the bottom. In this case 1″.
~Place your candy about 1/4″ from the edge of your scrap paper. Roll: top, side, bottom, side, top. Add 1/4″. Cut. In this case 5″
~Cut your paper. In this case 1″ x 5″.
~Determine center measurement and width of candy part you want on the bottom. Candy is about 1″ wide. DSP is 5″. Half of 5″ is 2-1/2″. Since the candy is 1″ wide we want 1/2″ on each side of the center we will score at 2″ and 3″.
~Punch ends with Tag Topper Punch centering before punching.
~Attach your candy to the bottom with 2-3 Glue Dots.
~Cut about 5-6″ ribbon, fold in half. Put folded part through both punch holes, tighten up DSP ends, twist ribbon so it is standing up, and put both ends through the ribbon loop. Pull tight. Depending on how slippery your ribbon is, you can tie it if necessary. 2. Stamp your sentiment on Whisper White cardstock in Fresh Fig Ink. Punch out. Attach to your candy holder with either Mini Stampin’ Dimensionals or Glue Dots.
Your Treat is ready to give away.
INSTRUCTIONS: 1. Cut your Crumb Cake card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″.
~Put one half of your card base in the Basketweave embossing folder lining up the score-line so it will be embossed all the way to the score-line.
~Big Shot Sandwich: Big Shot Platform with Thin-Die Adapter removed (OR Multipurpose Platform with at least 1 Tab open), (Skip the bottom cutting plate), Embossing Folder with cardstock sticking out, Top Cutting Plate. Just make sure the sides of your embossing folder are lined up with the sides of your Platform. 2. Stamp your Pumpkins in Memento Black ink on Crumb Cake cardstock. Color with the Blends Markers:
~Pumpkin Pie: Back and Front Pumpkins
~Cajun Craze: middle pumpkin behind the crate
~Soft Suede: Crate
~Shaded Spruce: Squash in the crate, Leaf.
~Daffodil Delight: Apple
Cut out with two Layering Circle Framelits layered together to cut out the colored image in a circle AND make a larger frame. 3. Pumpkin Pie Square is cut at 3-1/4″ x 4-1/4″. Stamp the corner images in Shaded Spruce ink in each corner. 4. DSP Rectangles.
~Striped Nature’s Poem rectangle is cut at 1-1/2″ x 4-1/4″
~Dotted Under the Mistletoe rectangle is cut at 1″ x 3-3/4″. 5. Put it all together.
~Lay out all your pieces where you want them. This is the order Kiev used:
Pumpkin Pie Square
~Use Tombow to attach the Square, Rectangles, and Circle Frame.
~Use Stampin’ Dimensionals to attach the stamped Circle
~Tie a Bow and attach it with Glue Dots.
INSTRUCTIONS: 1. Cut:
~Night of Navy card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″.
~Night of Navy card front at 4″ x 5-1/4″.
~Punch one cat from Basic Black cardstock with the Cat Punch.
~Punch one Daffodil Delight Circle for the Moon. Stamp your sentiment in Night of Navy ink on your Moon. 2. Run your Night of Navy card front through the Big Shot in the Woodland embossing folder.
~Shake your Shimmer Paint bottle well.
~Use just a teeny amount of White Shimmer Paint from inside the lid to paint the Tree Trunks and Branches.
~Paint the edge of your Cat, again using just a teeny amount of paint on your brush. Be careful not to smudge the paint. 3.Add two Rhinestones to the cat for eyes. 4. Lay out your Cat and Moon where you want them. Attach the Moon with Stampin’ Dimensionals. Attach the Cat with Mini Stampin’ Dimensionals. Use half Mini Stampin’ Dimensionals for the Cat’s tail.
Your card is finished.
Kiev designed this card using the Topical Chic Bundle for Color Challenge #26. I think it turned out wonderfully! Like she says, “It is great to come to work and be told that she is making cards today!” Contact me if YOU want to make cards almost every day either as a customer or a Stampin’ Up! Team Member.
INSTRUCTIONS: 1. Cut your Mango Melody card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Stamp
~Three Flowers with Cajun Craze ink on Cajun Craze cardstock.
~Sentiment on a 3/4″ x 3-1/2″ Very Vanilla cardstock with Cajun Craze ink. Use a Circle Punch to round off the ends of the cardstock. 3. Die Cut:
~Stamped Flowers with Flower Framelit
Die-cut Two of each Leaf in Mossy Meadow cardstock.
~Long Fern Leaf: Use both the outside Framelit and then put the inside Thinlit in the outside Framelit. Cut twice to get 4 leaves.
~Rounded Palm Type Leaf: Again use the outside Framelit with the inside Thinlit and cut twice to get 4 leaves. 4. Lay out all your Leaves and Flowers and the sentiment on your Mango Melody card base to decide where to put all the pieces.
~Use Tombow Glue to attach the Leaves and Flowers.
~Use Stampin’ Dimensionals to attach your sentiment.
Your Card is finished.
Do you want MORE Fall Card and Project Ideas? You can either go to the bottom of the sidebar to the “Categories” section and choose “Fall and Autumn” from the Drop-Down Menu OR Just Click HERE and get LOTS of ideas for your OWN Fall Projects.
INSTRUCTIONS: 1. Cut your Mango Melody card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Mango Melody card front at 3-3/4″ x 5-1/2″. Color the edge with your Call Me Clover Marker. 3. Rub your card front with your Embossing Buddy. Stamp your sentiment in VersaMark ink. Cover completely with your White embossing powder. Pour the excess back into the container. Flick the back a couple of times to remove the excess embossing powder from your cardstock. Use the High Speed on your Heat Tool to melt the embossing powder until it is shiny. 4. String your Leaf Ribbon above and below your sentiment. Use Glue Dots on the back of 4 leaves (or so) to hold each length of the Leaf Ribbon in place. If desired, add a couple of Leaves to two of the corners. Put a Glue Dot under each of these leaves. Trim the ribbon along the edge of the cardstock. Attach this layer to your card base.
Your Card is finished.
iNSTRUCTIONS: 1. Cut your Papers.
~Shaded Spruce card base at 5-1/2″ c 8-1/2″. Score and fold at 4-1/4″.
~Wood Pattern Nature’s Poem DSP cut at 4″ x 5-1/4″ 2. Die Cut using the Precision Base Plate using this Sandwich: Big Shot Platform, Precision Base Plate, cardstock, Wax Paper or Parchment Paper, Thinlit, top cutting plate. The Precision Base Plate takes the place of the Bottom cutting plate. From Shaded Spruce cardstock:
~1 long Pine Branch
~2 medium Pine Branches
~2 small Pine Branches From Copper Foil Sheet (1-1/2″ x 4″)
~Pine Cones: There are three Pine Cone Thinlits. You can choose only one, or choose a variety.
Sandwich: Big Shot Platform, Precision Base Plate, printer paper folded in half or quarters, Copper Foil Sheet, Wax Paper or Parchment Paper, Thinlit, top cutting plate. The Precision Base Plate takes the place of the Bottom cutting plate. NOTE: Use the Big Shot Die Brush to help remove the paper from the Thinlits. You can also use a toothpick, but it is really slow. 3. Arrange the Pine Branches on one corner of your Wood Pattern DSP. Attach with a thin line of Tombow Glue down the center of each Pine Branch. Each Pine Branch does NOT need to go all the way to the corner.
~Put the long Pine Branch down the center from the upper left corner.
~Put the two medium Pine Branches next to the long one at the edges of the DSP
~Put the two small Pine Branches in between the long and medium Pine Branches. 4. Now decide where you want your Pine Cones. Attach with thin scribbles of Tombow Glue. 5. Choose your sentiment and decide where you want it. Lay your card front on a piece of scratch paper. Stamp with VersaMark ink. Cover with Copper Embossing Powder. Put excess embossing powder back in the jar. Melt the embossing powder with your Heat Tool until the embossing powder is all shiny. 6. Attach your card front to your Shaded Spruce card base.
Your card is finished.
INSTRUCTIONS: 1. Cut your Pumpkin Pie card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Granny Apple Green card layer at 3″ x 5-1/2″. Attach to card base. 3. Cut two 2-3/8″ squares using the Layering Squares Framelits or your Paper Trimmer. Attach as shown to your Granny Apple Green card layer. 4. Cut two large Swirly Circles with your Big Shot. Lay on your card front. 5. Cut a 2-1/8″ Square with your Layering Squares Framelits or your Paper Trimmer.
~Stamp your Mummy Cat and the sentiment in Memento Black ink.
~Color with Blends Markers. It looks like she colored the Cat in Light Smoky Slate, the wrappings in Light Crumb Cake, and the Ear inside with Light Flirty Flamingo. 6. Lay your Swirly Circles and your colored Cat on your card front to decide where you want them. Glue on the Swirly Scribbles. Use Stampin’ Dimensionals to attach your Cat square.
Your Card is finished.
Do you like Card Making? Sign up for My Weekly Newsletters. As a Newsletter Subscriber, you will also get access to a FREE Membership site with projects going back to
INSTRUCTIONS: 1. Cut your Whisper White card front at 4-1/4″ x 5-1/2″. 2. Stamp the image in Memento ink as shown. 3. Color:
~Daffodil Delight: Yellow flowers
~Highland Heather: Large flower, bird’s wing tips
~Night of Navy: Butterfly
~Shaded Spruce: Leaves and stems
~Flirty Flamingo Light: Bird’s Wing feathers 4. Cut your Highland Heather card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. Attach your colored card front.
Your Card is finished.
INSTRUCTIONS: 1. Cut your Shaded Spruce card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cur your Copper Foil Sheet at 4″ x 4″. Center the square Tropical Thinlit and cut out with your Big Shot.
NOTE: If you want to keep your Copper Foil Sheet shiny and smooth, use this Big Shot Sandwich:
~Big Shot Platform with Thin Die Adapter (Or Multipurpose Platform with all tabs closed)
~Bottom Cutting Plate
~Copper Foil Sheet shiny side up
~Printer Paper touching shiny side of Copper Foil and Thinlit
~Top Cutting Plate
If you want a distressed Copper Foil look, leave out the Printer Paper and use your “well-loved” cutting plates. 3. Put Stampin’ Dimensionals on the back of your Copper Foil square. Cut some Mini Stampin’ Dimensionals in half and put behind the leaves in the die cut. 4. Rub the front of your card with your Embossing Buddy to prevent random specks of embossing powder on your project.
~Lay your card base on a piece of clean printer paper.
~Lay your Copper Foil square on your card front to help determine where to stamp your sentiment. I usually pay attention to the distance the bottom of the stamp is from the bottom of the card.
~Remove the Copper Foil square
~Stamp in VersaMark ink
~Dump Copper Embossing Powder over the stamped image area. Dump the Embossing Powder back into the container. Flick the back of your card front a couple of times to remove excess embossing powder.
~Melt the embossing powder with your Heat Tool until all the embossing powder is melted and shiny. 5. Remove the backing from all the Stampin’ Dimensionals and attach your Copper Foil square to your card front.
Your Card is finished.
This die-cut Thank You has four layers to give it dimension. Choose any colors you want when you make your card. SUPPLIES: Bundle:A Big Thank You Photopolymer 147377 Ink: Blackberry Bliss Cardstock: Berry Burst
Blackberry Bliss Punch:Detailed Trio #146320 Adhesives: Multipurpose Adhesive Sheet or Tombo Glue
INSTRUCTIONS: Watch this Video to learn how to use Multipurpose Adhesive Sheets. If you don’t have Multipurpose Adhesive Sheets then use Tombow Glue to layer your Thank You die-cuts.
1. Cut 3-4 of the large Thank Yous. Layer together with either Multipurpose Adhesive Sheets or Tombow Glue. 2. Cut your Rich Razzleberry card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 3. Cut your Berry Burst card front at 4″ x 5-1/4″
~Punch all four corners with the Flower Corner on the Trio Punch.
~Attach the Layered Thank You to the center of the card front.
~Stamp in Blackberry Bliss ink.
~Attach your finished card front to your card base.
Your card is finished.
INSTRUCTIONS: 1. Cut your Gorgeous Grape card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Stamp Stars on the card front in Gorgeous Grape ink. Paint a sparkly star with the Wink of Stella pen in the center of each stamped star/ 3. Choose the Layering Oval Framelit to fit your stamped images. Cut out from Whisper White cardstock. Stamp your Elephant and sentiment on your Oval Whisper White cardstock with Memento Black ink. Color with Blends Markers. I think she used the Basic Black and Pumpkin Pie Blends. You could also use Stampin’ Write Markers or Watercolor Pencils for a different look. Attach to card front with Stampin’ Dimensionals.
Your Card is finished. 4. Optional Envelope: Stamp Gorgeous Grape Stars on the envelope flap and/or lower front corners.
Need more Halloween crafting supplies? Get them from My Online Store. Just type “Halloween” in the “Find Products” Search Box in the upper left sidebar.
INSTRUCTIONS: 1. Cut your Crushed Curry card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Mossy Meadow card front at 4″ x 5-1/4″. Run through your Big Shot with the Swirls & Curls embossing folder.
~Paint your Swirls & Curls card front with the Shimmer Paint using a Q-Tip for each color. You can paint as much or as little as you want. The ladies at stamp class painted more than I did and it looked great! Set aside. 3. Cut your Cardstock and a matching piece of Multipurpose Adhesive Sheet for each color.
~Cajun Craze Large Leaf: 3-1/4″ x 3-1/2″
~Pumpkin Pie 3 Leaves: 3″ x 3″
~Mango Melody Long Leaf: 1-1/2″ x 4″
~Crushed Curry strip: 1″ x 4-1/4″ 4. Run over each Multipurpose Adhesive Sheet piece with your Bone Folder. This helps it to separate from the backing better. Attach your Multipurpose Adhesive Sheets to their matching sized cardstock by peeling off the word paper and sticking it to the cardstock. It doesn’t have to be perfect. 5. Cut out your Leaves and Strip using your Big Shot and the Precision Base Plate. You may still need to roll your dies through several times on each side. Check to see that the cardstock has cut completely through. The Adhesive Sheet backing may not cut all the way through even though the cardstock has cut all the way through. This is okay. 6. Lay out all your pieces on your Mossy Meadow card front. Remove the adhesive backing from each leaf and the strip and attach them to the card. Attach a piece of Copper Trim to your card on one corner if desired. Use SNAIL on the back to attach it.
Your Card is finished. 7. Optional: Emboss your Envelope Flap with the Swirls & Curls embossing folder. Watch this Video to see how easy it is.
Subscribe to my Newsletter by October 2, 2018, to get all 12 Weeks of Christmas projects. Each project is designed by me and is Exclusive only for my newsletter subscribers. These 12 Christmas projects will be easy to make multiples of. There will be 4 cards, 4 gifts, and 4 packages to hold small gifts.
INSTRUCTIONS: 1. Cut your Night of Navy card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut TWO Whisper White pieces at 4″ x 5-1/4″. One will be for the card front. The other one will be for the inside.
~Run one through the Big Shot with the Striped Scallops embossing folder. 3. Stamp your sentiment on Whisper White cardstock with Night of Navy ink. Cut out with a Layering Circle Framelit. Choose a Scallop Circle Framlit larger than your Whisper White circle and cut it from Night of Navy cardstock. Layer them with Stampin’ Dimensionals. 4. Lay your layered circles on your embossed card front. Decide where you want to tie your bow. Wrap the ribbon around your card front and tie the bow where you want it. Watch this Video on attaching ribbon if you need help. 5. Attach your layered circles to the card front with Stampin’ Dimensionals.
Your Card is finished. 6. Optional Envelope. Emboss the envelope flap with the Striped Scallops embossing folder. Watch this Video for instructions.
Do you enjoy these Challenges? Would you like to download the Challenges for the whole month? Subscribe to my World-Wide Newsletter and the Challenges for the month will be attached to the email on the third Wednesday of the month.
Search Nendy’s Site
Sign up for my Newsletter
March Host Code
Current Stampin’ Up! Catalogs
Get your OWN Paper Pumpkin monthly Craft Kit!
Everything on the Blog and Website is made by me, Nendy Kerr, unless stated otherwise. Stampin’ Up! does not endorse the content on these pages. Thank you for visiting!