We are celebrating an anniversay in our family so I made a card using the die cut chairs from the Seasonal Layers Thinlits for the happy couple.
Under the Trees Outdoor Anniversary Card

SUPPLIES:
Stamps:  Sheltering Tree  Photopolymer #137163
Teeny Tiny Wishes  Wood Mount #128748, Clear Mount #127802
Happy Birthday Gorgeous  Photopolymer #143662
Inks:  Garden Green
Wild Wasabi
Chocolate Chip
Dapper Denim
Card Stock:  Thick Whisper White
Big Shot:  Seasonal Layers Thinlits #143751
Punch:  Classic Label  #141491
Other:  Watercolor Pencils  #141709
Blender Pen
Fine Tip Glue Pen or Tombow Glue

INSTRUCTIONS:
1.  Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″.  SCORE and fold at 4-1/4″.
2.  Stamp with the Sheltering Tree stamps:
~The grass in Garden Green ink five times on the bottom edge of your card base.
~The Tree trunks & branches in Chocolate Chip ink on top of the grass hills.
~The Tree leaves in Wild Wasabi ink over the tree branches.
3.  Stamp Happy Anniversary twice in Dapper Denim ink on Whisper White card stock.  Then stamp the Classic Label Frame from Happy Birthday Gorgeous over the Happy Anniversary.  Punch out with the Classic Label Punch.
4.  Die cut two chairs from Whisper White card stock.  (You might want to attach the Happy Anniversary to each chair before attaching to card base.)  Attach to card base with Fine Tip Glue.

Make someone’s anniversary special by making them this fun anniversary card!  Get everything to make this card at My Online Store:  nendykerr.stampinup.net .

Here is another diagonal  twist card – this time with a Flower and small sentiment.  We are still using the Eastern Palace Premiere Bundle plus a few extras.  This card uses the leftover diagonal cut pieces from the card on Monday.
Diagonal Twist Flower CardSUPPLIES:
*Eastern Palace Premiere Bundle #147207
Stamps:  *Eastern Beauty Photopolymer Stamp Set  #143675
Teeny Tiny Wishes  Wood Mount #128748, Clear Mount #127802
Inks:  *Tranquil Tide #144085
*Lemon Lime Twist #144086
*Fresh Fig #144082
Card Stock:  *Eastern Palace Card Stock Pack #144148-Tranquil Tide & Dapper Denim
Whisper White
*Eastern Palace Specialty Designer Series Paper  #144147
Big Shot:  *Eastern Medallions Thinlits #143725
Stitched Shapes Framelits #145372
Punch:  Classic Label #141491
Other:  Fast Fuse or SNAIL Adhesive
Stampin’ Dimensionals
Optional Pearl for flower center:  Metal Rimmed Pearls #138394, Basic Pearls are being reconfigured and will be available June 1st.

INSTRUCTIONS:
1.  Cut your Dapper Denim card base at 5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.
2.  Cut 2 pieces of patterned paper at 4″ x 5-1/4″.  Cut the first piece diagonally.
For the second piece:
~Put it with the other side up.
~Hold one of the first cut diagonal pieces next to it to help you decide which way to cut it diagonally.  Cut.
~Do you want to sponge around the edge?  If you do, do it now.  (I am out of town and forgot my sponges.  I miss them!!!)
~Lay one of each pattern on your card front.  Attach the bottom/right side first.  Then attach the top/left side.  Mine overlapped a little along the diagonal center to get it straight.
~Add a border sticker to the one edge if desired.
~Repeat with the other two diagonal pieces.  I put these on a Tranquil card base.  See Monday’s post for this card.
3.  Stamp the Eastern Beauty Flower on Whisper White card stock with Fresh Fig ink.  Stamp the little heart inside each petal with Fresh Fig ink.  Cut out with the coordinating Framelit.  Put Stampin’ Dimensionals on the back.
4.  Stamp your sentiment on Whisper White card stock with Tranquil Tide ink.  Punch out with the Classic Label Punch.  Stamp the circles or other small image with Lemon Lime Twist ink.  Add Stampin’ Dimensionals to the back.
5.  Cut a Stitched Shapes Circle Framelit from Tranquil Tide card stock.  Attach the die cut Flower to it.  Put Stampin’ Dimensionals on the back and attach the to the upper left part of the card.  Attach your sentiment to the lower right part of the card.  I would put a pearl in the center of the flower if I had one.  🙂

      

Shop at My Online Store to get all your paper crafting and card making supplies.

My friend’s granddaughter just gave birth to a little girl named Lily.  I hope you enjoy this fun Baby Card!
Baby Card for LilySUPPLIES:
Bundle:  Something for Baby stamps and Thinlits  Wood #
Teeny Tiny Wishes
Ink:  Sweet Sugarplum
Flirty Flamingo
Card Stock:  Pink Pirouette
Whisper White
Playful Palette Designer Series Paper Stack #141657
Big Shot:  Lucky Stars embossing folder #135817
Punch:  Classic Label #
Other:  Sponge wedge
Adhesives:  Tombow Glue
Stampin’ Dimensionals

INSTRUCTIONS:
1.  Cut your Pink Pirouette card base at 5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.
2.  Cut your Pink Pirouette card front at 3-3/4″ x 5″.  Run through your Big Shot with the Lucky Stars embossing folder.  Sponge Flirty Flamingo ink around the edges.  Attach to card base with Tombow Glue.
3.  Stamp on Whisper White card stock, then cut out with coordinating die or punch:
~Sweet Sugarplum ink:  booties, Hello Baby
~Flirty Flamingo ink:  bib, flower
~Onsie: Cut from Playful Palette Sweet Sugarplum Polka Dot paper.
4.  Arrange all pieces where you want them.  Attach Hello Baby with Stampin’ Dimensionals.  Glue on all the other pieces.
5.  If you want to add some interest to the envelope flap, emboss it with the Lucky Stars embossing folder.

Welcome to Baby Lilly who happens to have LOTS of dark hair!

I have decided to update the Bunny Card I made a few years ago.  I hope you like this one just as much!

Here is the NEW one:
Easter Bunny Card-Updated

Here is the Original one.  You can find the Supply List and Instructions HERE.
Bunny Card

SUPPLIES:
Stamps:  Teeny Tiny Wishes   Wood #128748, Clear #127802
Ink:
  Black StazOn
Basic Black Marker
Signo White Gel Pen #105021  OR Chalk Marker #132133
Card Stock:  Soft Sky
Whisper White
Pink Pirouette
Basic Black
Cucumber Crush
Big Shot:  Ovals Collection Framelits  #129381
Decorataive Dots embossing folder  #133520
Polka Dots embossing folder  #133739
Punches:  Large Oval  #119855
Word Window  #119857
Washi Label  #138296
Itty Bitty Accents #133787
3/4″ Circle  #119873
Other:  Fringe Scissors  #133325
Tombow Glue
Glue Dots
Stampin’ Dimensionals
Tear & Tape Adhesive

INSTRUCTIONS:
1.  Cut your Soft Sky card base at 5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.  Put your card front in the Polka Dot embossing folder with the card back on the outside behind the embossing folder.  Make sure the dots for the card front are sinking down so they will be raised when you are finished.
2.  Cut a 1″ x 5-1/2″ piece of Cucumber Crush card stock.  Put Tear & Tape along one 5-1/2″ edge.  Use your Fringe Scissors to cut “grass” down to the Tear & Tape.  Attach to the lower edge of your card front.
3.  Cut out your Bunny Head and Ears from Whisper White card stock and Oval Framelits.  I used the smallest  Oval for the ears.  Choose the size you want for the Head.
4.  Assemble your Bunny.
~Punch two Pink Pirouette Large Ovals for the inside of the ears.  Glue to the Whisper White ears.  Let dry for while your find your Decorative Dots embossing folder.  Lay both ears in the Embossing Folder and run through your Big Shot.
~Punch two Basic Black 3/4″ Circles for the Bunny Eyes.
~Punch the Itty Bitty Accents Heart from Pink Pirouette card stock for the nose.
~Lay the Bunny Head on the bottom right corner of your card front at a slight angle.  It should extend off the card front a little on both the side and the bottom.
~Lay the eyes and the nose on the Bunny Head.  Position the ears where you want them, making sure the one will not extend over the card base.
~Attach the parts:  Ears with Glue Dots or Tombow Glue.  Eyes with Tombow Glue.  Draw the white eye parts with your White Gel Pen or Chalk Marker.
~Remove the nose and draw the whiskers and the mouth with your Basic Black Marker.
~Attach the Heart Nose with a Stampin’ Dimensional cut in half.  You might have to cut off a little bit.
5.  Attach your Bunny to your card front with lots of Dimensionals.  Make sure the one ear is touching the top of the card.  Place your Bunny at an angle.
6.  Stamp Happy Easter with Black ink onto Whisper White card stock.  Cut out with the Word Window Punch.  Use the Washi Label Punch to punch a Label from Cucumber Crush card stock.  Attach the two together with Stampin’ Dimensionals.  Attach to the card with Stampin’ Dimensionals.

Happy Easter and Spring!
Nendy Kerr

Easter is March 27th this year.  This week’s posts will feature Easter projects.  Today features the Remarkable You stamp set.  This is the card I am sending to my family.

This card uses a very basic Paper Piecing Technique.  For more detailed Paper Piecing projects subscribe to The Creative Technique Corner.  The Paper Piecing Technique is CT22.
Happy Easter Lilly CardSUPPLIES:
Stamps:  Remarkable You   Wood #139891, Clear #139894
Teeny Tiny Wishes   Wood #128748, Clear #127802
Ink:  Black StazOn
Garden Green Marker
Daffodil Delight Marker
Card Stock:  Very Vanilla
So Saffron
Daffodil Delight
Big Shot:  Stylish Stripes embossing folder  #132174
Punch:  Word Window  #119857
Other:  Paper Snips #103579  OR scissors
Tombow Glue
Stampin’ Dimensionals

INSTRUCTIONS:
1.  Cut your Daffodil Delight card base at 5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.
2.  Cut your card front at 4-1/4″ x 5-1/2″.  Run through your Big Shot using the Stylish Stripes embossing folder.  Glue to card base.
3.  Cut your So Saffron card layer at 3-1/4″ x 3-3/4″.  Stamp your Easter Lilly on the So Saffron card layer in Black StazOn ink.  Color the stems with the Garden Green Marker.
4.  Stamp your Easter Lily on Very Vanilla card stock.  Cut out around the flower.  Glue onto the So Saffron layer over the flower.  Color in the flower center with your Daffodil Delight Marker.
5.  Cut a Very Vanilla layer at 3-1/2″ x 4″.  Attach your So Saffron layer to the Very Vanilla layer.  I used Tombow Glue.  Attach your Very Vanilla layer to the card front with Stampin’ Dimensionals.
6.  Stamp Happy Easter in Black StazOn on Very Vanilla card stock.  Punch out with the Word Window Punch.  Attach to your card front with Stampin’ Dimensionals.
7.  You can also emboss your envelope flap for added interest if you want.  Watch This Video to see how quick and easy it is.

Happy Easter!
Nendy Kerr

 

Today is my Botanical Blooms class.  We are making 4 cards including the two posted earlier this week.  I also made another card from some of the pieces.  Since I could not decide which ones to post I will show you all three.  I will only give brief details for each.  They all use the Botanical Blooms Bundle (stamps, Framelits, Designer Series Paper) and one uses the Sale-a-bration Botanical Vellum paper.  Have fun!

Card 1 – Three Squares Card

Botanical Blooms CardTips:
~Hello Honey squares are 2″ and sponged with Cajun Craze.
~The Designer Series Paper squares are 1-3/4″ square and sponged with Cajun Craze.
~The Vellum is 1-3/4″ x 5-1/2″.  I laid out all the pieces and attached the squares to the Vellum.  I then added adhesive under the squares to attach the Vellum to the Mossy Meadow card base.

Yellow Flower Card

Botanical Blooms CardTips:
~Hello Honey card base, Cajun Craze layer is 4″ x 5-1/4″.  Patterned paper is 3-3/4″ x 5″.  Use your stamp and Mossy Meadow ink to stamp lines on the blank leaves on the paper.  I thought this was pretty fun.
~Stamp a large leaf lines and a medium leaf lines in Mossy Meadow ink on Mossy Meadow ink.  Cut out with the coordinating size Leaf Framelits.  Next time I will use Dimensionals under the leaves so they stand out better.
~Cut your Flower and two flower centers from Hello Honey card stock.  Attach the centers with Glue Dots.  I did not use Dimensionals under the center petals and will add them the next time.

Old Olive and Daffodil Delight Fern Card

Botanical Blooms CardTips:
~Cut your Daffodil Delight card base.
~Cut your Old Olive card front at 4-1/4″ x 5-1/2″.  Cut out Ferns from the front.  (I just used the piece I had cut the ferns out of for my class.)  Attach it to your card base.  I just used SNAIL.  Tombow Glue would have been a better choice though.
~The Cajun Craze square is 1-1/2″.  The patterned paper square is 1-1/4″.  Both are sponged with Cajun Craze ink.  These are attached to the card front with Dimensionals.
~The “thinking of you” is from Teeny Tiny Wishes stamp set and punched out with the Word Window Punch.  The Daffodil Delight is punched out with the Washi Label Punch.  The Botanical Garden Flower Jewel is attached with a Glue Dot.

Have fun using your Botanical Blooms Bundle!  I sure have!!Buy the Botanical Blooms Bundle Today!

Happy Card Making!
Nendy Kerr

This fun Valentine Heart Banner Card is perfect for almost anyone!  It is also easy to make.  Have fun making several of your own!
Valentine Heart Banner CardSUPPLIES:
Stamps:  Bloomin’ Love
Teeny Tiny Wishes
Ink:  Real Red
Card Stock:  Thick Whisper White
Red Glimmer Paper
Punch:  Itty Bitty Accents Punch Pack #  Heart
Other:  Cherry Cobbler Baker’s Twine
Fast Fuse or Tombow Glue
Glue Dots
Scotch Tape

INSTRUCTIONS:
1.  Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″.  SCORE and fold at 4-1/4″.
2.  Cut a Whisper White card front at 4-1/4″ x 5-1/2″.  Lay out the Baker’s Twine.  Use the Scotch Tape (adhesive on one side) to hold the ends and the middle in place on the back of the card front.
3.  Stamp where desired in Real Red ink.
4.  Punch 11 or so Red Glimmer Paper Hearts using the Itty Bitty Accents Heart Punch.  Attach the hearts with Glue Dots to the Baker’s Twine and outside corners of the card.
5.  You now have a Valentine Card you can give to someone special!

Happy Valentine Card Making!
Nendy Kerr

These Wood Snowflake Cards are very elegant with the Gold Foil on the Paper and the Gold Satin Ribbon.  They are also quick to make!  An essential thing this time of year!
Snowflake Christmas CardSnowflake Christmas CardSUPPLIES:
Stamps:  Teeny Tiny Wishes  Wood #128748, Clear #127802
Ink:  Real Red
Card Stock:  Whisper White
Mossy Meadow
Winter Wonderland Specialty Designer Series Paper #139588
Punches:  Decorative Label #120907
Washi Label  #138296
Embellishments:  Snowflake Elements #139638
Iced Rhinestones #139637
Gold 5/8″ Satin Ribbon #134547
Adhesives:  Fast Fuse or SNAIL
Stampin’ Dimensionals
Glue Dots

INSTRUCTIONS:
1.  Cut your Mossy Meadow card base at 5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.
2.  Cur your Pinecone Paper at either:  3-3/4″ x 5″ OR 4″ x 5-1/4″.  Place your Gold Satin Ribbon so there is 1″ of Pinecone Paper showing under the ribbon.  Attach the Ribbon with either Fast Fuse or Glue Dots to the back of the Pinecone Paper.
3.  Punch a Decorative Label Punch  from Mossy Meadow card stock.  Stamp Merry Christmas on Whisper White card stock and then punch out with the Washi Label Punch.  Attach to the Decorative Label with Dimensionals.  Attach Decorative Label over Gold Ribbon with Dimensionals.
4.  CAREFULLY, as they are easily broken, lift out 1 large and 2 small Wood Snowflakes OR just 1 Snowflake.  Lay in the position you want them.  Attach a Glue Dot to the center back of each snowflake and attach to card front.
5. Optional:  Add Iced Rhinestones to the Label and/or the center of a snowflake and/or the corner of the card.

Merry Christmas Card Making!
Nendy Kerr

I wanted to make a Purple Glimmer Paper Witch’s hat and so I tried stamping on Dazzling Diamonds Glimmer Paper.  I LOVE the results!  I hope you try this and enjoy the results too.  Please leave your comments and let me know how you like this technique.

This video is 4 minutes and 56 seconds.

SUPPLIES:
Bundle:  Howl-O-Ween Treat  Wood #140839, Clear #140840  (Includes the Howl-O-Ween Treat stamp set and the Boo to You Framelits)
Stamps:  Teeny Tiny Wishes Wood #
Ink:  Black StazOn
Blackberry Bliss
Elegant Eggplant Marker
Card Stock:  Very Vanilla
Happy Haunting Designer Series Paper #139584
Black Glimmer Paper #139605
Dazzling Diamonds Glimmer Paper #
Big Shot:  Boo to You Framelits  (See Bundle above)
Punch:  Word Window #
Other:  Spider Web Doilies #139622
Fine Tip Glue Pen #138309
Fast Fuse or Snail Adhesive
Dimensionals

INSTRUCTIONS:
1.  Cut your Very Vanilla card base at 5-1/2″ x 8-1/2″.  Score & fold at 4-1/4″.
~Cut your Happy Hauntings spiderweb paper at 1-3/4″ x 5-1/2″.  Attach to card base about 1/8″ above the bottom edge of your card front.
~Cut your Black Glimmer Paper at 1/2″ x 6″.
2.  Cut your Spider Web Doily in half after deciding which part you want as the center.  I chose the part with the circle to be at the center.  Use the Fine Tip Glue Pen on the thicker parts of the doily and attach it close to the top of your card base.  Stamp your Spiders in Black StazOn ink remembering to press down firmly.  Now attach your Black Glimmer Paper strip to cover the gap between the Spider Web Doily and the Spider Web paper.
3.  Stamp, color, and Heat Set your Witch Hat as shown in the video.  Cut out with your Big Shot and the Witch Hat Framelit.  Attach to your card with Dimensionals.
4.  Stamp Happy Halloween in Black StazOn ink on Very Vanilla card stock.  Punch out with the Word Window Punch.  Attach to card front with Dimensionals.
5.  Now you have a cute Halloween card to give someone special.

Happy Stamping!
Nendy Kerr

My daughter’s and son-in-law’s anniversary was on St. Patrick’s Day and this is the card I made for them.  Most of it is quick and easy except for the Heart drying time.  Enjoy tweaking this one for someone special.  You could use any punched or die cut shape instead of the hearts.
Hearts & Stars Anniversary Card

SUPPLIES:
Stamps:  Teeny Tiny Wishes  Wood #128748, Clear #127802
Hello Life  Photopolymer #137136
Ink:  Black StazOn
Metallic Silver #132142
Daffodil Delight Marker
Card Stock:  Night of Navy
Daffodil Delight
Whisper White
Silver Glimmer Paper #135314
Dazzling Diamonds Glimmer Paper  #135315
Big Shot:  Lucky Stars Embossing Folder  #135817
Bitty Banners Framelits #129267
Punches:  Sweetheart  #133786
Itty Bitty Accents Punch Pack #133787 (small Star)
Other:  Crystal Effects  #101055
Silicone Craft Sheet  #127853
Tombow Glue

INSTRUCTIONS:
1.  Cut your Daffodil Delight card base at 5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.
2.  Cut your Night of Navy card front at 4″ x 5-1/4″.  Stamp your sentiment in Silver ink.  Let dry for a few seconds.  Run through your Big Shot with the Lucky Stars Embossing Folder.
3.  Punch your Hearts from the Silver and Dazzling Diamonds Glimmer Paper.  Lay on the card front in the position you want.  Now punch your small stars from Daffodil Delight card stock.  Put a dot of Tombow Glue on an embossed Night of Navy Star and glue your punched star on top of an embossed star.  Do this until you have as many stars as you want above your hearts.
4.  Now lay your sparkly Hearts on the Silicone Craft Sheet.  Cover each Heart with Crystal Effects.  Let dry for 4-5 hours or overnight.  (You can just use the Hearts without the Crystal Effects if you want.)
5.  After your Crystal Effects has dried on your Hearts, trim any overhanging Crystal Effects from around the edges of your Hearts with Paper Snips.  Glue onto your card.
6.  Stamp your sentiment in Black ink on Whisper White card stock.  Cut out with the Itty Bitty Banners Framelit.  Color the edges with your Daffodil Delight Marker.  Attach to Hearts with Glue Dots.
7.  If you want to add some excitement to the envelope you can use the Lucky Stars Embossing Folder on the envelope flap.  Watch this Video to show you how to do this.

Happy Card Making!
Nendy Kerr

We made this pretty Easter card at my last Stamp Class.  It has basic coloring with Markers.  Some ladies used the back side of the patterned DSP for a more vibrantly colored card.
Butterfly Basics Easter Card

SUPPLIES:
Stamps:  Butterfly Basics  Wood #138813, Clear #138816, Photopolymer #137154, MDS #138142, Libre Mariposa #138351, Simplement Papillon #138353
Teeny Tiny Wishes  Wood #128748, Clear #127802, MDS #125766
Ink:  Memento Tuxedo Black
Markers:  Crisp Cantaloupe
Pistachio Pudding
Card Stock:  Whisper White
Crisp Cantaloupe
Flowerpot Designer Series Paper #133698
Big Shot:  Ovals Collection Framelits #129381
Punches:  Word Window #119857
Modern Label #119849
Other:  Basic Pearls
Fast Fuse OR SNAIL Adhesive
Dimensionals

INSTRUCTIONS:
1.  Cut your Crisp Cantaloupe card base at 5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.
2.  Choose the pattern of the Designer Series Paper you want and cut it at 4″ x 5-1/4″.  Attach to card base with Fast Fuse OR SNAIL Adhesive.
3.  Stamp your flower image on Whisper White card stock with black ink.  NOTE:  Use Memento Black ink with Photopolymer stamps.  StayzOn will permanently make them black.  Color the flowers with Markers.  Due to the shading in the stamps only simple coloring is needed to make the flower look great!
4.  Choose the desired Oval Framelit to cut out your flower.  Yes, I cut off part of the stem.  Choose the next larger Oval Framelit and use it to cut your Crisp Cantaloupe mat.  Put Dimensionals on the back of both Ovals and layer them together.
5.  Stamp Happy Easter in Black ink on Whisper White card stock.  Punch out with the Word Window Punch.  Punch the mat from Crisp Cantaloupe card stock using the Modern Label Punch.  Attach your sentiment with Fast Fuse or SNAIL Adhesive.  Put Dimensionals on the back.  I usually use three half Dimensionals on the back of the Modern Label piece.
6.  Lay out your Ovals and sentiment in the desired positions and then attach them.
7.  Happy Easter!

Happy Easter Card Making!
Nendy Kerr

My Daughter’s and Son-in-law’s Anniversary was this past Sunday so, of course, here is the card I made for them using the Starburst Sayings and coordinating Framelits with a little touch of wood.  I also make a similar Wedding Card recently.
Starburst Anniversary Card

SUPPLIES:
Stamps:  Starburst Sayings  w#133182  c#133185  (Bundle with Framelits w#134817    c#134818)
Teeny Tiny Wishes w#128748  c#127802
Ink:  VersaMark
Real Red
Night of Navy
Card Stock:  Night of Navy
Whisper White
Big Shot:  Starburst Framelits #132967 (See Bundle above)
Polka Dot Embossing Folder #133739
Other:  Cherry Cobbler  Embossing Powder#122949
Heat Tool #129053
Stampin’ Dimensionals
Glue Dots
Tombow Glue

INSTRUCTIONS:
1.  Cut you Night of Navy card base at 5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.  Watch this video for more card base details.
2.  Cut your Night of Navy card front at 4″ x 5-1/4″.  Run through your Big Shot with the Polka Dot embossing folder.  Color edges with Night of Navy ink pad if desired.  (Watch this video for Edging Techniques.) Attach to card front with Tombow Glue.
3.  Stamp “Oh Happy Day” in VersaMark ink on Whisper White card stock.  Dump Cherry Cobbler embossing powder on it.  Remove excess.  Melt with Heat Tool.  Stamp the two smaller Starbursts in Real Red ink on the Whisper White card stock.  Cut out all your Starbursts with the coordinating Framelits.
4.  Stamp you Happy Anniversay in Real Red ink on the Wood Banner .
5.  Place all pieces in the desired positions on your card front.  Attach Starburst  pieces with Dimensionals and Wood piece with Glue Dots.
6.  Sing the “Oh Happy Day” song while admiring this trendy card.  (The version that goes through my mind is the one from the Sister Act movie.)

Happy Card Making!
Nendy Kerr

My niece is getting married so I made this wedding card for her.  It is fairly simple, but elegant.  All products used excpet the Full Heart Punch will be available in the NEW Catalog.  Enjoy making wedding cards for your family and friends this year!  You can change the card stock, ribbon, and ink colors to match their wedding colors.

Red & Silver Wedding Card

SUPPLIES:
Stamps:  Teeny Tiny Wishes w#128748  c#127802  MDS#125766
Ink:  Real Red
Card Stock:  Real Red
Silver Fancy Foil Designer Vellum #133364
Silver Glimmer Paper #135314 (available June 2, 2014)
Whisper White
Big Shot:  Ovals Collection Framelits #129381
Hearts Collection Framelits #125599
Punches
:  Full Heart  #119883
Ribbons:  Cherry Cobbler 3/4″ Chevron #130012
Silver 1/8″ Ribbon #132137
Real Red 1/8″ Taffeta #119251
Adhesives:  Glue Dots
Dimensionals

INSTRUCTIONS:
1.  Cut your Real Red card base at 5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.  Watch THIS VIDEO for more detailed instructions.

2.  Cut your Silver Fancy Foil Vellum with your Big Shot using the largest Scallop Oval Framelit.  Put a Glue Dot behind each silver heart.  Adhere Vellum Oval to card front making sure the hearts are the correct direction.  🙂

3.  Cut your Ribbons 7-8 inches long:
~One:  Cherry Cobbler 3/4″ Chevron
~Two:  Real Red 1/8″ Taffeta
~Two:  Silver 1/8″ Ribbon
Hold them together while tying a loose knot.  Position the narrow ribbons on the Knot if desired.  Now position the narrow ribbons over the Chevron Ribbon if desired.  If they don’t want to stay where you want them to just place a Glue Dot under the offending ribbon(s) near the knot.

4.  Punch out or cut out (with the desired size Heart Framelit) the Silver Glimmer Paper Heart.  Put Dimensionals on the back.  Stamp sentiment on Whisper White card stock with Real Red ink.  Punch out your sentiment with the Word Window Punch.  Run the brush tip of your Real Red Marker around the edge of your punched out sentiment if desired.  You can also do this around the Heart if desired.  It does add a little extra definition.  I didn’t do it on either this time.  Adhere the sentiment to the Heart with half Dimensionals.

5.  Lay your Ribbons and Heart in the desired positions.  Attach the Heart with the Dimensionals you put on the back.  Attach your Ribbons using 4-5 Glue Dots on the knot and next to the knot.

6.  Admire your silvery Wedding Card before writing in it and sending it off to the lucky couple.

Happy Card-Making!
Nendy Kerr