Woodland Embossing Folder Card Video

Make this fun Fall Cat card using and Embossing Folder coloring technique!

This Video is 3-1/2 minutes long.

SUPPLIES:
Stamps:  Count My Blessings  Wood Mount #144787, Clear Mount #144790  – Video Card
Spooky Cat   Photopolymer #144749 (for Cat card)
Ink:  Crumb Cake – both cards
Early Espresso – Video card
Memento Black – Cat card
Tangerine Tango – Cat card
Whisper White -Cat card
Card Stock:  Whisper White
Tangering Tango
Basic Black – Cat card
Big Shot:  Woodland Embossing Folder #139673
Stitched Shapes Framelits #145372
Punch:  Cat Punch #144666  Cat card
Embellishments:  Enamel Shapes – Cat card
Adhesives:  Tombow Glue
Stampin’ Dimensionals

REMINDERS:
1.  Lightly rub your ink pad on the inside of the embossing folder on the side where you can see the word “Sizzix: through it.  Make sure you cover all the areas your 4″ x 5-1/4” Whisper White card stock will be.  It does not have to be perfect through.
2.  Stamp the cat face first, then punch out the cat.  Watch the video for this.  Glue the cat onto the card front.
3.  Cardstock measurements:
~Tangerine Tango card base:  5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.
~Whisper White card front:  4″ x 5-1/4″
4.  Stamp your greeting on Whisper White cardstock then cut out with your Stitched Shapes Oval.  Add embellishments if desired.  Attach to card front with Stampin’ Dimensionals.
~If you are using the Happy Halloween sentiments, stamp the main part with Memento Black ink on Whisper White card stock first, then stamp the Happy Halloween in Tangerine Tango last.

Need some Halloween of Fall paper crafting supplies?  Try out My Online Store open night and day without leaving your home.

Punch Bat Card

This cut Happy Halloween Bat Card is easy to make.  You even get to use real Punches!

This Video is 3-1/2 minutes long.

SUPPLIES:
Stamps:  Spooky Cat  Photopolymer #144749
Ink:  Tangerine Tango
Cardstock:  Thick Very Vanilla
Basic Black
Spooky Night Designer Series Paper #144610
Punches:  1-1/2″ Circle  #138299
3/4″ Circle  #119873
Embellishments:  Rhinestones  #144220
Basic Black 3/8″ Shimmer Ribbon  #144129
Adhesives:  Fast Fuse or SNAIL
Stampin’ Dimensionals
Glue Dots (optional)

INSTRUCTIONS:
1.  Cut your Thick Very Vanilla card base at 4-1/4″ x 11″.  SCORE and fold at 5-1/2″.
2.  Cut your Thick Very Vanilla card front at 3-3/4″ x 5″.  Stamp your Happy Halloween in Tangerine Tango ink on the lower right corner about 1/2″ above the bottom edge.
3.  Cut your Designer Series Paper at 1″ x 3-3/4″.  Attach it to the card front about 1″ from the bottom.  Tie your ribbon around the card front and tie in a knot.  Position as desired.  Use a Glue Dot or two to hold it in place if necessary.
4.  Punch the Bat and attach to your card front as shown in the video.
5.  Attach the card front to the card base with Stampin’ Dimensionals.
6.  Stamp Happy Halloween on you envelope flap if desired.

Get your Halloween card making supplies from My Online Store.

Halloween Jack O’ Lantern Card

Make this quick and easy Halloween Jack O’Lantern card using the Spooky Night Designer Series Paper or stamp your own pumpkins or Jack O’Lanterns on Very Vanilla cardstock.
Halloween Jack O'Lantern Card

SUPPLIES:
Stamps:  Spooky Cat  Photopolymer #144749
Inks:  Tangerine Tango
Memento Black
Cajun Craze
Cardstock:  Cajun Craze
Pumpkin Pie
Whisper White
Spooky Night Designer Series Paper #144610
Big Shot:  Layering Ovals Framelits #141706
Other:  1/4″ Copper Trim #144179
Stamping Sponge
Fast Fuse or SNAIL Adhesive
Stampin’ Dimensionals
Glue Dot

INSTRUCTIONS:
1.  Cut your Cajun Craze card base at 5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.
2.  Cut your Jack O’Lantern paper at 4″ x 5-1/4″.  Tie Copper Trim around it and tie a knot.  Keep in place with a Glue Dot under the knot.  Attach to card base.
Variation:  Cut Very Vanilla card stock at 4″ x 5-1/4″.  Stamp pumpkins in a variety of orange inks randomly over the Very Vanilla card stock.  Stamp or draw faces on them if desired.  Wrap with ribbon, tie a knot, and attach to your card front.
3.  Stamp the Yummy Treat in Black ink on Whisper White cardstock.  Then stam Trick or Treat in Pumpkin Pie ink as shown in photo.  Cut out with the Layering Oval Framelit and your Big Shot.  Cut out the next size larger scallop oval from Pumpkin Pie card stock and sponge edges with Cajun Craze ink.  Layer the two ovals together with Stampin’ Dimensionals.  Attach to card front with Stampin’ Dimensionals.
4.  Stamp Trick or Treat on you envelope flap OR cut a piece of patterned paper and attach to your envelope flap if desired.

Get your Halloween and Fall card making and paper crafting supplies from My Online Store.

Punched Pumpkin Card

This cute Punch Art Pumpkin Card can be made with either or both Punches or Framelits.  Change the sentiment to use for ANY Fall occasion.
Punch Art Pumpkin Card

SUPPLIES:
Stamps:  Spooky Cat  Photopolymer #144749
Inks:  Crushed Curry
Early Espresso
Pumpkin Pie
Old Olive
Card Stock:  Old Olive
Whisper White
Early Espresso
Pumpkin Pie
Big Shot:  Layering Oval Framelits #141706
Punch:  1-1/2″ Circle Punch  #138299
Ribbon:  Daffodil Delight 1/4″ Double Stitched Ribbon #144116
Tools:  Fringe Scissors (retired) OR Paper Snips
Stamping Sponge #141337
Adhesives:  Fast Fuse or SNAIL
Stampin’ Dimensionals
Tear & Tape
Tombow Glue or Glue Dots

INSTRUCTIONS:
1.  Cut & Prep:
~Old Olive card base at 5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.
~Early Espress card layer at 4″ x 5-1/4″.  Attach to card base.
~Whisper White at 3-3/4″ x 5″.  Sponge all over with Crushed Curry ink.  Then sponge with a pouncing motion in random spots to get the effect you want.
~Cut out 3 of the smaller ovals from Pumpkin Pie card stock with your Big Shot.
~Punch out 3 1-1/2″ circles from Pumpkin Pie card stock.
~Stamp your sentiment on Whisper White card stock wity Early Espresso ink.  Cut out with a Layering Oval Framelit.  Cut a Scallop Oval slightly larger from Early Espresso card stock.  Layer together with SNAIL or Glue Dots.
~Cut Old Olive at 1-1/4″ x 5″.  Put some Tear & Tape along one of the long edges.  Now cut your grass blades to the Tear & Tape.
2. Assemble:
~Attach your Grass with the Tear and Tape to the bottom edge of your sponged Whisper White.
~Cut your Ribbon about 16″ long.  Put SNAIL on the back leaving 3″ at each end without tape on.  Wrap the ribbon around the grass.  Tie a knot on the left side.  Trim ends.
~Lay out the Oval and Circle Pumpkins and the sentiment.
~Attach two Ovals to the sponged layer, slightly overlapping with Fast Fuse.  Attach the last Oval with Stampin’ Dimensionals in the center of the other Ovals.  Repeat with the Circles.  Cut stems with Paper Snips from Old Olive cardstock.
~Attach your sentiment with Stampin’ Dimensionals.
Your card is finished!
3.  Envelope.  Sponge the edges and flap if desired.

Get all  your Fall Card and Treat giving supplies from My Online Store.

Spooky Cat Halloween Card

This is a quick and easy Spooky Cat and Moon Halloween Card.  The hardest part is punching out the cat after embossing it’s face on the Basic Black Card stock.  If you have the Spooky Night Designer Series Paper you can just punch out a cat!  No embossing needed!!
Spooky Cat and Moon Card

SUPPLIES:
Bundle #146014:  *Spooky Cat Photopolymer stamp set + *Cat Punch (Available at 10% off through January 2, 2018)
Stamps:  *Spooky Cat Photopolymer #144749
Ink:  VersaMark
Cajun Craze
Card Stock:  Tangerine Tango
Basic Black
Spooky Night Designer Series Paper #144610
Punch: *Cat Punch #144666
Cat Face:  White Embossing Powder
Heat Tool
Other:  Stamping Sponge
Fast Fuse or SNAIL
Stampin’ Dimensionals
Tombow Glue

INSTRUCTIONS:
1.  Cut your Tangerine Tango card base at 5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.
2.  Cut your card front Happy Halloween paper at 4″ x 5-1/4″.  Sponge around the edges with Cajun Craze ink.  Attach to your card base.
3.  Cat.  Check out the Cat Punch Video!
~Option 1:  Punch out of the Cat paper.  You may have to trim close to the bottom of the cat so the Punch can get close enough to punch it out.
~Options 2:  Cut a 3″ square piece of Basic Black card stock.  Rub card stock with Embossing Buddy #103083.  Set the punch next to the card stock so you can guess where to stamp the eyes in VersaMark ink.  Stamp.  Add White Embossing Powder.  Remove Excess.  Melt with Heat Tool.  Punch out, positioning the cat face inside the cat head before you punch.
4.  Cat Layers.
~Cut  a 3-1/4″ square of Basic Black card stock.
~Cut the Tree and Moon Paper 3″ Square lining up where it meets the next picture square.
~Attach the Moom Paper to the Basic Black Square.  Attach the Cat with Tombow Glue.
~Attach this square to the card front with Stampin’ Dimensionals.
You have finished the card!
5. Envelope.  if desired stamp some of the images from the stamp set on your card front along the bottom or sides, and/or on the envelope flap/back.

Get the supplies for your Halloween Crafting from My Online Store.

Cat Punch Video

The Cat Punch is very popular this Fall.  Here is a video with some tips on using it.

This Video is 4 minutes and 20 seconds long.

VIDEO SUPPLIES:
Spooky Cat Stamps & Cat Punch Bundle #146014  (Save 10%)
Cat Punch #144666
Spooky Cat Photopolymer stamp set #144749
Spooky Night Designer Series Paper #144610

Get these supplies to make your OWN Cat projects at My Online Store.

Trick or Treat Halloween Card

Make this fun Trick or Treat Halloween Card for someone who enjoys celebrating Halloween!
Witch's Hat Trick or Treat Card

SUPPLIES:
Stamps:  Spooky Cat  Photopolymer #144749
Inks:  Cajun Craze
Crushed Curry
Pumpkin Pie
Memento Black
Card Stock:  Thick Very Vanilla
Pumpkin Pie
Spooky Night Designer Series Paper #144610
Other:Daffodil Delight 1/4″ Double-Stitched Ribbon #144116
Fast Fuse or SNAIL
Stampin’ Pierce Mat

INSTRUCTIONS:
1.  Cut your Thick Very Vanilla card base at 5-1/2″ x 8-1/2″.  SCORE and fold at 4-1/4″.
2.  Cut your patterned paper at 2-1/2″ x 5-1/2″.  Wrap your Ribbon (about 6 to 6-1/2″ long) around your patterned paper.  You can use Tear & Tape on the back of the ribbon to help it stick or use Glue Dots on the ribbon to help it stick to the paper.  Attach to your card base.
3.  Stamp the Witch’s Hat in Cajun Craze.  Stamp the Potions in Cajun Craze, Pumpkin Pie, and Crushed Curry.  Stamp the Trick or Treat in Memento Black ink on Pumpkin Pie card stock.  Cut out with scissors or your Paper Trimmer.  Attach to card front.
You are finished!

Get the supplies for your Treat or Treat Crafting at My Online Store by October 13th.