INSTRUCTIONS: Watch This Video for detailed instructions on making a Fry Box.
1. Cut out your Fry Box from Thick Whisper White card stock. 2. Stamp the stripes using Real Red ink. 3. Punch the Hearts from Red Glimmer Paper using the Sweetheart punch for the large heart and the Itty Bitty Accents Heart Punch for the 3 small Hearts. Glue the Hearts to the Fry Box as shown. 4. Fill with a treat. You can also put treats in a Cellophane Bag and tie with a ribbon.
INSTRUCTIONS: 1. Make your Curvy Keepsake Box using Real Red card stock. Watch this Video for instructions. 2. Punch out 2 large Hearts and 1 small Heart from Silver Glimmer Paper. Glue the Large Hearts onto the Curvy Keepsake box on opposite sides. 3. Cut out one of the tags from the Curvy Keepsake Thinlits. Write “TO” and “FROM” on the back if desired. Glue your Small Heart onto this tag. Thread some Cherry Cobbler Baker’s Twine through one of the handles and tie a bow. Trim the ends as desired. 4. Fill with your treats and give away.
This fun Valentine Heart Banner Card is perfect for almost anyone! It is also easy to make. Have fun making several of your own! SUPPLIES: Stamps: Bloomin’ Love
Teeny Tiny Wishes Ink: Real Red Card Stock: Thick Whisper White
Red Glimmer Paper Punch: Itty Bitty Accents Punch Pack # Heart Other: Cherry Cobbler Baker’s Twine
Fast Fuse or Tombow Glue
INSTRUCTIONS: 1. Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″. 2. Cut a Whisper White card front at 4-1/4″ x 5-1/2″. Lay out the Baker’s Twine. Use the Scotch Tape (adhesive on one side) to hold the ends and the middle in place on the back of the card front. 3. Stamp where desired in Real Red ink. 4. Punch 11 or so Red Glimmer Paper Hearts using the Itty Bitty Accents Heart Punch. Attach the hearts with Glue Dots to the Baker’s Twine and outside corners of the card. 5. You now have a Valentine Card you can give to someone special!
My daughter’s and son-in-law’s anniversary was on St. Patrick’s Day and this is the card I made for them. Most of it is quick and easy except for the Heart drying time. Enjoy tweaking this one for someone special. You could use any punched or die cut shape instead of the hearts.
INSTRUCTIONS: 1. Cut your Daffodil Delight card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Night of Navy card front at 4″ x 5-1/4″. Stamp your sentiment in Silver ink. Let dry for a few seconds. Run through your Big Shot with the Lucky Stars Embossing Folder. 3. Punch your Hearts from the Silver and Dazzling Diamonds Glimmer Paper. Lay on the card front in the position you want. Now punch your small stars from Daffodil Delight card stock. Put a dot of Tombow Glue on an embossed Night of Navy Star and glue your punched star on top of an embossed star. Do this until you have as many stars as you want above your hearts. 4. Now lay your sparkly Hearts on the Silicone Craft Sheet. Cover each Heart with Crystal Effects. Let dry for 4-5 hours or overnight. (You can just use the Hearts without the Crystal Effects if you want.) 5. After your Crystal Effects has dried on your Hearts, trim any overhanging Crystal Effects from around the edges of your Hearts with Paper Snips. Glue onto your card. 6. Stamp your sentiment in Black ink on Whisper White card stock. Cut out with the Itty Bitty Banners Framelit. Color the edges with your Daffodil Delight Marker. Attach to Hearts with Glue Dots. 7. If you want to add some excitement to the envelope you can use the Lucky Stars Embossing Folder on the envelope flap. Watch this Video to show you how to do this.
This is the Wedding Card I made for my Church Choir Buddy and her new DH who were married on Friday. This card was my inspiration. I tried several other ideas but this is the card that got finished. I may use some of the other parts soon as her sister is getting married in less than 3 weeks.
INSTRUCTIONS: 1. Cut your Real Red card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. Watch this video if you want more details on Basic Card Bases. 2. Cut your Whisper White layer at 4-1/4″ x 5-1/2″. Run through your Big Shot with the Happy Heart Embossing Folder. Trim the sides close to the Hearts with your Paper Trimmer. Attach to card base with Tombow Glue. 3. Make your Real Red Envelope with your Envelope Punch Board. Cut your Real Red card stock at 3-1/2″ x 3-1/2″ square. Make your first Punch and Score at 2″. Watch this video if you need help using your Envelope Punch Board. 4. I used the retired Expressions Thinlit for the word “Love”, but it is retired. You can use either the Signo White Gel Pen or the Chalk Marker to write “Love” on the envelope. You can also use a stamp you like or just leave it blank. 5. Let’s die cut a couple of Heart Frames with our Framelits. The large one is from Whisper White and is used to mount the Glimmer Hearts to. I chose the largest straight-edged Heart Framelits. Use this sandwich: Magnetic Platform (or Multipurpose Platform with all tabs closed), a cutting plate, your Whisper White card stock. Lay both the Heart Framelits with the smaller inside the larger making sure there is an even space in between. The space in between will be your Heart Frame. 6. Now choose the Framelits for the smaller Dazzling Diamonds Glimmer Paper Heart. I used the second and third smallest. Use the same process as above and cut out this Heart Frame. Use your Real Red Marker to color the edges so it will show up against the Whisper White background. 7. Punch 10 Silver Glimmer Hearts and 10 Red Glimmer Paper Hearts using the Itty Bitty Accents Heart Punch. Arrange the hearts around the Whisper White Heart Frame in the desired positions. Attach each Glimmer Heart to the Frame with a Glue Dot. Overlap the two Hearts that meet in the center. 8. Now to put everything together. Slide the large Heart Frame in the Real Red envelope to determine the position on the card front and where to add the Glue Dots to hold it in the envelope. Put a Glue Dot at the bottom tip and one along each side of this Heart to secure it in the envelope. I used Tombow Glue on the back of the envelope and the back of the Heart Frame that showed from behind to secure it to the card front. Now attach your Dazzling Diamonds Glimmer Heart inside the large Heart. 9. If desired, you can add a piece of 4″ x 5-1/4″ Whisper White to the inside to write on. You can either add a couple of Punched Glimmer Hearts, or some stamped Hearts to the lower corners. Then write you message to the Bride and Groom. 10. Gift Wrapping Hint. If you give them two gifts of different sizes (such as a board game and a DVD OR Project Life Album and Pocket Pages with a Project Life Card Collection with the accessory pack inside the box), wrap the gifts separately. Then use Sticky Strip to attach the gifts together. This way they will stay in place even if you don’t tie ribbon around them.
Do you like giving little treats or gifts to others? The Tiny Treat Boxes are the perfect size for a small treat or gift such as earrings or other small jewelry. They can easily be decorated for any occasion. These are decorated for Valentine’s Day or could be used for an Anniversary. They would also make great Party Favor Boxes.
I love this Pirate stamps which is perfect for boys! I bought it so my grandson could make Valentine’s cards for his school classmates. On the first card he made I asked why he didn’t color the picture. He said he wanted to let them have fun coloring. I enjoyed coloring the cute Pirate picture and so did the ladies at my Stamp Class. You can choose whether you color it or let the recipient color it.
INSTRUCTIONS: 1. Cut your Real Red card base at 5-1/2″ x 9-1/2″. Score and fold at 4-1/4″. 2. Cut your Chocolate Chip bottom card layer at 4-1/4″ x 5-1/2″. Attach to your card base. 3. Cut your Cherry Cobbler card stock at 4″ x 5-1/4″. Run through your Big Shot using the Happy Hearts embossing folder. Attach to your Chocolate Chip layer. 4. Stamp your Pirate in Tuxedo Black Memento ink on Whisper White card stock. Color as desired. Color Suggestions are in the Supply List above. Trim around the edges and measure the height and width. Add 1/4″ to the height and width when cutting your Chocolate Chip mat. Adhere the mat and stamped image together. 5. Cut out the “I heart you” from Whisper White using the Thinlit from the Label Card Thinlits. Punch out a heart from either Real Red or Cherry Cobbler card stock and put it inside the heart shape using a Dimensional. 6. Position the “I heart you” and your Pirate in the desired positions. Attach the Pirate with Fast Fuse or Tombow. Attach the “I heart you” with Tombow Glue. 7. You now have a card to give to a little boy or a Pirate lover for Valentine’s Day.
INSTRUCTIONS: 1. Cut your Daffodil Delight card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. Watch this video to learn more about basic card bases. 2. Cut your Designer Series Paper at 4-1/4″ x 5-1/2″. Sponge around the edges with Mossy Meadow ink. Watch this video for Edging Techniques. 3. Stamp the “Awesomeness” sentiment in Mossy Meadow ink on Daffodil Delight card stock. Cut out with the largest Apothecary Accents Framelit. Sponge around the edges with Mossy Meadow ink. Punch out tthree of the Itty Bitty Accents Hearts from Silver Glimmer Paper. Attach two with Dimensionals as shown. 4. Stamp Happy Birthday in Mossy Meadow ink on Whisper White card stock. Cut out with the Apothecary Accents Framelit. Sponge around the edges with Daffodil Delight ink. Punch two hearts with the Owl Punch. Attach with a half Dimensional as shown. 5. Lay out your pieces as shown. Attach with the Daffodil Delight die cut with Dimensionals (making sure you remove all the staticy backing papers from the card front – oops!). Use Dimensionals as normal on the Whisper White die cut where it will touch the Daffodil Delight die cut. Stack two dimensionals on the rest so the height will be level. (Peel off the Dimensional backing on the first Dimensional, then add another Dimensional to the sticky part of the first Dimensional to get “stacked” Dimensionals.) 6. Add your last Silver Glimmer Paper Heart to the lower corner. I think I just used Fast Fuse to hold it on. 7. Write something in the card to let that special someone know how awesome they are. Remember to mail the card or hand deliver it.
Happy Card Making!
Search Nendy’s Site
Sign up for my Newsletter
Current Stampin’ Up! Catalogs
Get your OWN Paper Pumpkin monthly Craft Kit!
Everything on the Blog and Website is made by me, Nendy Kerr, unless stated otherwise. Stampin’ Up! does not endorse the content on these pages. Thank you for visiting!