Emily’s Wedding Card

This is the Wedding Card I made for my Church Choir Buddy and her new DH who were married on Friday.  This card was my inspiration.  I tried several other ideas but this is the card that got finished.  I may use some of the other parts soon as her sister is getting married in less than 3 weeks.
Emily's Wedding Card

SUPPLIES:
Ink:  Real Red Marker
Card Stock:  Real Red
Whisper White
Silver Glimmer Paper 135314
Red Glimmer Paper #127790
Dazzling Diamonds Glimmer Paper #135315
Big Shot:  Hearts Framelits #125599
Happy Heart Embossing Folder #137364
Expressions Thinlits (retired-sorry)
Punches:  Sweetheart Punch  #133786
Itty Bitty Accents Punch Pack #133787 (small Heart)
Tools:  Envelope Punch Board #133774
Paper Trimmer
Other:  Tombow Glue
Glue Dots

INSTRUCTIONS:
1.  Cut your Real Red card base at 5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.  Watch this video if you want more details on Basic Card Bases.
2.  Cut your Whisper White layer at 4-1/4″ x 5-1/2″.  Run through your Big Shot with the Happy Heart Embossing Folder.  Trim the sides close to the Hearts with your Paper Trimmer.  Attach to card base with Tombow Glue.
3.  Make your Real Red Envelope with your Envelope Punch Board.  Cut your Real Red card stock at 3-1/2″ x 3-1/2″ square.  Make your first Punch and Score at 2″.  Watch this video if you need help using your Envelope Punch Board.
4.  I used the retired Expressions Thinlit for the word “Love”, but it is retired.  You can use either the Signo White Gel Pen or the Chalk Marker to write “Love” on the envelope.  You can also use a stamp you like or just leave it blank.
5.  Let’s die cut a couple of Heart Frames with our Framelits.  The large one is from Whisper White and is used to mount the Glimmer Hearts to.    I chose the largest straight-edged Heart Framelits.  Use this sandwich:  Magnetic Platform (or Multipurpose Platform with all tabs closed), a cutting plate, your Whisper White card stock.  Lay both the Heart Framelits with the smaller inside the larger making sure there is an even space in between.  The space in between will be your Heart Frame.
6.  Now choose the Framelits for the smaller Dazzling Diamonds Glimmer Paper Heart.  I used the second and third smallest.  Use the same process as above and cut out this Heart Frame.  Use your Real Red Marker to color the edges so it will show up against the Whisper White background.
7.  Punch 10 Silver Glimmer Hearts and 10 Red Glimmer Paper Hearts using the Itty Bitty Accents Heart Punch.  Arrange the hearts around the Whisper White Heart Frame in the desired positions.  Attach each Glimmer Heart to the Frame with a Glue Dot.  Overlap the two Hearts that meet in the center.
8.  Now to put everything together.  Slide the large Heart Frame in the Real Red envelope to determine the position on the card front and where to add the Glue Dots to hold it in the envelope.  Put a Glue Dot at the bottom tip and one along each side of this Heart to secure it in the envelope.  I used Tombow Glue on the back of the envelope and the back of the Heart Frame that showed from behind to secure it to the card front.  Now attach your Dazzling Diamonds Glimmer Heart inside the large Heart.
9.  If desired, you can add a piece of 4″ x 5-1/4″ Whisper White to the inside to write on.  You can either add a couple of Punched Glimmer Hearts, or some stamped Hearts to the lower corners.  Then write you message to the Bride and Groom.
10.  Gift Wrapping Hint.  If you give them two gifts of different sizes (such as a board game and a DVD OR Project Life Album and Pocket Pages with a Project Life Card Collection with the accessory pack inside the box), wrap the gifts separately.  Then use Sticky Strip to attach the gifts together.  This way they will stay in place even if you don’t tie ribbon around them.

Happy Wedding Card Making!
Nendy Kerr

Love you to the Moon

Love you to the Moon and back!  This is a favorite saying for several in my family and makes a perfect “I Love You!” card.
Love You to the Moon Valentine Card

SUPPLIES:
Stamps:  Love You to The Moon  w#133140  c#133143
Ink:  Cherry Cobbler
Real Red
Cherry Cobbler Marker
Chocolate Chip Marker
Card Stock:  Whisper White
Cherry Cobbler
Real Red
Big Shot:  Envelope Liner Framelits #132172
Adorning Accents Embossing Folder #125601
Tools:  Envelope Punch Board #133774 for rounding corners
Paper Trimmer with Rotary Addition and Small Scallop Blade #129410
Punch:  Wide Oval
Other:  SNAIL Adhesive
Sticky Strip
Dimensionals

Love You to the Moon Valentine CardINSTRUCTIONS:
1.  Cut your Whisper White card base to 5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.
2.  Cut your Real Red card front to 4″ x 5-1/4″ using the Paper Trimmer with the Rotary Addition and the Small Scallop cutting blade.  Stamp random hearts and the Love Note in Cherry Cobbler ink on the card front.
3.  Cut two small Envelope Liners from Real Red card stock.  Trim one 1/4″ below the slanted dividing edge.  Emboss across the center with the Heart Adorning Accents Embossing Folder.  Round the top two corners.  Now adhere with Sticky Strip along the sides and bottom to the whole Envelope Liner.  Adhere to the card front at an angle.
4.  Cut your Whisper White card at 1-1/2″ x 3-1/2″.  Round the corners.  Color your Love you to the Moon stamp with Cherry Cobbler and Chocolate Chip Markers and stamp in desired position on card.  Stamp 4 small hearts in the corners using Real Red ink.  Slide in the pocket you just made.
5.  Stamp a Love Note in Cherry Cobbler ink on Whisper White card stock.  Punch out with the Extra Large Oval punch.  Stamp two small hearts with Real Red ink in the oval.  Adhere to your Pocket with Dimensionals.

Happy Valentine Stamping!
Nendy Kerr

Halloween Happiness Card

It is hard to believe that Halloween is tomorrow!  Here is a quick and easy Halloween Card for you to make.
Halloween Happiness Card

SUPPLIES:
Stamps:  Halloween Happiness  w#131859  MDS#134924
Markers:  Pumpkin Pie
Tangerine Tango
Garden Green
Always Artichoke
Card Stock:  Whisper White
Tangerine Tango
Cajun Craze
Witches Brew Designer Series Paper #132185
Other:  Always Artichoke Seam Binding Ribbon (Oops, retired!)  Try Basic Black Chevron Ribbon #130010, OR Summer Starfruit 3/8″ Stitched Satin Ribbon #126846
Envelope Punch Board #133774  OR Corner Rounder Punch #119871
SNAIL Adhesive
Dimensionals
Glue Dots

INSTRUCTIONS:
1.  Cut your Cajun Craze card stock to 5-1/2″ x 8-1/2″.  Score and fold at 4-1/4″.
2.  Cut your Witches Brew striped paper at 4″ x 5-1/4″.  Round the corners with the Envelope Punch Board OR a Corner Rounder Punch.  Wrap a 6-1/2″ piece of Always Artichoke Seam Binding around your striped paper.  Adhere at the back of the paper with SNAIL.  Adhere striped layer to card base with SNAIL.
3.  Cut a 3″ x 4″ piece of Tangerine Tango.  Round the corners.  Adhere to card front with Dimensionals.
4.  Cut a piece of Whisper White at 2-1/4″ x 3-1/4″.  Round Corners.  Color Pumpkins with Tango Tangerine and Pumpkin Pie Markers.  Color stems and vines with Garden Green Marker.  Color words with Always Artichoke Marker.  Remoisten ink with your breath several times and stamp on your Whisper White card stock.  Adhere to Tangerine Tango layer with Dimensionals.
5.  Tie a bow with the Always Artichoke Seam Binding.  Adhere to top of Tangerine Tango layer with Glue Dots.  I also added a Glue Dot to each Ribbon tail with a Glue Dot to keep it in position.
6.  Admire your cute Halloween Happiness Card before giving it to someone.

Happy Halloween Stamping!
Nendy Kerr

Birthday Card & Embellishment using the Envelope Punch Board Video

Watch this video!Today we will make a Birthday Card using Stampin’ Up’s NEW Envelope Punch Board.  We will make a File Folder tab large enough for our Happy Birthday sentiment.  We will also make an embellishment for the front of our card.  Have Fun using your Envelope Punch Board for something in addition to making envelopes!  (Refresh page if video doesn’t load or Watch it on YouTube)

SUPPLIES:
Stamps:  Bring on the Cake w#128490  c#121958
Perfectly Penned  w#128703  c#122892
Ink:  Raspberry Ripple
Card Stock:
  Raspberry Ripple
Primrose Petals
Very Vanilla
Birthday Basics Designer Series Paper #130145
Other:  Envelope Punch Board #133774
Tombow Multipurpose Liquid Glue
SNAIL Adhesive

Paper Measurements:
Primrose Petals card base:  5-1/2″ x 6-1/4″.  Score & fold at 4-1/4″
Raspberry Ripple card stock:  1-1/2″ x 5-1/2″ AND 1/2″ x 5-1/2″
Primrose Petals card stock:  1″ x 5-1/2″
Birthday Basics Designer Series Paper for Envelope:  6-3/4″ square
Very Vanilla for small card:  4-1/2″ x 7″.  Score and fold at 3-1/2″

Now that your papers are all cut, grab your Envelope Punch Board and follow along!

Click here for more information and to Join Now!

Happy Cardmaking with your Envelope Punch Board!
Nendy