INSTRUCTIONS: 1. Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. Watch this Video to learn more about card bases. 2. Cut your Melon Mambo card stock at 3″ x 4-1/4″. Run through your Big Shot with the Modern Mosaic embossing folder. Glue to card base. 3. Cut your Bermuda Bay card stock at 2-1/2″ x 4-1/4″. Run through the Big Shot with the Lucky Stars embossing folder. Glue on top of your Melon Mambo layer. 4. Stamp the leaves image in Garden Green ink on Daffodil Delight card stock. Cut out with scissors. Set aside. 5. Stamp the Butterfly in Melon Mambo ink on Whisper White card stock. Cut out with scissors. Set aside. 6. Stamp your “Awesome” sentiment in Garden Green ink on Whisper White card stock. Punch out with the 1-3/4″ Scallop Circle Punch. 7. Use your 2″ Circle Punch to punch a Daffodil Delight circle. 8. Lay out all your pieces in the positions you want them. Attach the Leaves with Tombow Glue. Attach the Butterfly with Glue Dots. Attach the Punched Circles with Stampin’ Dimensionals. 9. Tie a bow with the Bermuda Bay Baker’s Twine. Attach it by putting a Glue Dot behind the knot and squishing in the Glue Dot so it is covered by the knot. 10. Hope you had fun! Now make YOUR OWN Version!
This pretty, quick & easy I Love You Valentine Card is sure to be a hit. You can change the card base and card front colors if this will go to a man. Just make sure the color of your Hearts shows up well against the card front color. SUPPLIES: Card Stock: Pink Pirouette
Red Glimmer Paper
Dazzling Diamonds Glimmer Paper Big Shot: Perfect Dots Embossing Folder
Little Letters Thinlits Punch: Sweetheart # Adhesives: Tombow Glue
INSTRUCTIONS: 1. Cut your Pink Pirouette card base at 5-1/2″ x 11″. Score and fold at 4-1/4″. 2. Cut your Pink Pirouette card front at 4-1/4″ x 5-1/2″. Run through your Big Shot using the Perfect Dots or other embossing folder. Attach to card base. I use Tombow Glue. 3. Punch out 4 Hearts from Red Glimmer Paper using your Sweetheart Punch. 4. Cut out your letters with the Little Letters Thinlits and your Big Shot.
~LOVE from Dazzling Diamonds Glimmer Paper
~IYOU from Red Glimmer Paper 5. Glue your LOVE onto your Hearts. You might have to hold each letter in place for a bit until it starts to stick. I found a pair of Craft Tweezers very helpful to hold the Letter while putting the Tombow on and placing it on the Heart where I wanted it. Craft Tweezers stay closed until you pinch them open. 6. Lay out your LOVE Hearts and the rest of your letters where you want them on your card front. Glue the I YOU directly onto the card front. Attach the LOVE Hearts with Dimensionals.
INSTRUCTIONS: 1. Cut your card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. You can use either Real Red or Thick Whisper White for your card base. 2. Cut your Real Red card front at 4-1/4″ x 5-1/2″. Run it through your Big Shot with the Decorative Dots Embossing Folder. Glue to your card base. 3. Stamp 3 Hearts of your choice and 4 sayings in Real Red ink on Whisper White card stock. Punch out the Hearts with the Sweetheart punch. Cut out the sayings. Put Dimensionals on the back of each piece. You will need to use half Dimensionals on the narrow pieces. 4. Arrange all the pieces on your card front. When you are happy with the placement remove the Dimensional backings from one piece at a time and attach it. Continue until all pieces are attached. 5. You can emboss the flap of the envelope if desired. Watch This Video to learn how.
INSTRUCTIONS: 1. Cut your Blushing Bride card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. Watch this Video for more information on making card bases. 2. Cut your Pink Pirouette card layer at 4″ x 5-1/4″. Run through the Big Shot with your Happy Heart Embossing Folder. Color the sides with either your Rose Red Ink Pad or Rose Red Marker. Glue to your card base. 3. Heart. Stamp the Flowered Heart with Wild Wasabi ink on Blushing Bride card stock. Cut out with your Paper Snips. 4. Lay your cut out Flowered Heart on top of your Blushing Bride Glimmer Paper. Cut out a Glimmer Paper mat about 1/4″ larger than your Flowered Heart. Attach the two Hearts with Dimensionals. 5.Flowers. Stamp on Blushing Bride card stock:
~1 large Flower in Rose Red ink
~3 small Flowers in Rose Red ink
~2 small Flowers in Blushing Bride ink
~Cut out with coordinating Thinlits
~Add Dimensionals to the back of all Flowers and attach them to the Flowered Heart.
~Add Pearls to the center of each Flower. 6.My Valentine. Put the My Valentine and the long flower & vine stamps on a D Block.
~Color with the Rose Red Marker and the Wild Wasabi Marker. Remoisten by breathing on the colored stamp with your mouth wide open for several breaths. Stamp on Blushing Bride card stock.
~Cut out using the large Chalk Talk Framelit. Place your top cutting pad only on the part of the Framelit you want to cut. Run through your Big Shot. Now reverse the top cutting plate, lining up the cut lines with the inside of the Framelit until it is in the position you want. Again, only place the top cutting plate over the part that needs to be cut. Run through your Big Shot.
~Lay our cut out My Valentine on Blushing Bride Glimmer Paper and cut out about 1/4″ larger on each side. Trim the corners last.
~Attach the card stock and Glimmer Paper together with Dimensionals.
~Add a small Pearl to the center of the Flower, as shown. 7. Lay out the Flowered Heart and the My Valentine in the positions you want them. Attach to card front with Dimensionals. 8. Punch three small Glimmer Paper Hearts with the Itty Bitty Accents Heart Punch. Attach to card front with Dimensionals on top of embossed Hearts. 9. You now have an elegant Valentine to give to your BFF or another favorite woman in your life.
INSTRUCTIONS: 1. Cut your Rose Red card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your card front at 4-1/4″ x 5-1/2″. Run through your Big Shot with the Elegant Dots embossing folder. Glue onto card base with Tombow Glue. 3. Decide which Oval Framelit to use around your flower swag. Cut it out of Whisper White card stock. Use your Stamp-a-ma-jig to stamp your flower swag twice on your Oval. Use your Stamp-a-ma-jig to stamp Happy Anniversary in the center. Put Stampin’ Dimensionals on the back and attach to your card front.
My friend, Deborah, has been busy and shared a few Christmas projects with me. Two Christmas Fry Boxes-an Elf and Santa Claus, and a Snowman. I will give you the basic supply list. ELF BOX SUPPLIES Big Shot: Fry Box Bigz L Die #132966 Chevron Embossing Folder #127749
Top Note Bigz Die (retired)
Labels Framelits (Retired) Punches: Scallop Circle and smaller Circle (I am not sure what sizes-My guess would be at least 1-3/4″ for the Scallop Circle)
Petite Curly Label (retired)
1/2″ Circle for the end of the boot Tips: 1. The legs are about 1″ x 3-3/4″ long and go all the way to the bottom of the Fry Box. 2. Cover where the Top Note Boot meets the legs with a scallop circle decoration. 3. If you are putting something heavy in your Fry Box put tape on both side edges. 4. Cut just the front of the Fry Box and run it through your Chevron Embossing Folder. 5. The Black 1/2″ belt only goes on the front and both sides. 6. The Silver belt buckle is 1-1/8″ high x 1-1/4″ wide. 7. The sentiment was typed on the computer, printed on card stock, the cut out with Framelits. Layer the next larger Framelit under it and tie it to your treat. Have yourelf a merry little Christmas
SNOWMAN TAG OR ORNAMENT SUPPLIES: Big Shot:Circle Framelits #130911 Punches: retired Snowflake punch for arms (I don’t remember the name) Maybe use the Tree Builder Punch
1/4″ circles for eyes (she used Black Rhinestones)
1/16″ for thread to go through Tips: 1. The circle diameters are: 1-3/8″, 2-1/2″, 3-1/4″. You can use either the Circle Punches or the Circle Framelits to make your circles. 2. Sponge around the edges with either dark gray or black. 3. Attach the circles together with Dimensionals. 4. Hand cut the nose. Tie a bow and attach it with Glue Dots.
INSTRUCTIONS: 1. Cut your Old Olive card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Always Artichoke card front at 4″ x 5-1/4″. Run through your Big Shot with the Chevron embossing folder. Attach to card base with Tombow Glue. 3. Stamp three leaves close together on Old Olive card stock with Always Artichoke ink. Hand cut them leaving them connectd at the lowest leaf tip. Attach Dimensionals to the backs. Set aside. 4. Stamp your sentiment from Lighthearted Leaves in Always Artichoke ink on Old Olive card stock. Punch out with the Note Tag Punch. Punch out the 1/4″ circle. Fold two 5-6″ pieces of 1/8″ Gold Ribbon in half. Thread the fold through the hold from the back and insert the ends through the loop. Pull tight. Add Stampin’ Dimensionals to the back including on the back of the ribbon. 5. Lay your leaves and sentiment on your card front and attach them with Dimensionals. 6. Happy Thanksgiving from me to you!
INSTRUCTIONS: 1. Cut your Tangerine Tango card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Tangerine Tango card front at 4-1/4″ x 5-1/2″. Run through your Big Shot with your embossing folder. Glue to card front. 3. Stamp two Cajun Craze Leaves and one Delightful Dijon leaf. Cut out with the coordinating Framelits. 4. Cut out your Thanks Thinlit with your Big Shot. I also used Parchment Paper between the Thinlit and card stock. You can also use the Precision Cutting Base if desired. I totally forgot about using it. 🙂 5. Lay out the Leaves and the Thanks. Attach with Tombow Glue. 6. You now have another Fall Thank you card to give to someone special.
INSTRUCTIONS: 1. Cut your Cherry Cobbler card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Cherry Cobbler card front at 4-1/4″ x 5-1/2″. Emboss with your Big Shot and the Brick Wall embossing folder. Glue to card base. 3. Cut the Noel from Dazzling Diamonds Glimmer Paper. It is helpful to put Parchment Paper or Wax Paper between the card stock and Thinlit before you cut it out. 4. Stamp your Wreath. Pay attention to where the “Lining Up Tabs” are and try to get them in the same place for each stamp. Choose the green inks you want. Cut out with the coordinating Framelits. Yes, you can use both Framelits at the same time. Add Dimensionals to the back of the Wreath. 5. Position the Noel and Wreath where you want them on your card front. Attach the Wreath with Dimensionals. Attach the Noel with Tombow Glue. Just use a very thin line of Tombow Glue. 6. Tie a bow with the Glitter Ribbon. Attach it to the Wreath with several Glue Dots. 7. You have now finished another Christmas card! Congratulations!
INSTRUCTIONS: 1. Cut your Tangelo Twist card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Whisper White card front at 4-1/4″ x 5-1/2″. 3. Sponge your Woodland embossing folder on the inside of the part that has the Sizzix label.
NOTE: Pay attention to the direction your folder faces. The “Bottom” of the embossing folder image is at the fold. The “Top” of the image is at the upper open edge.
~Chocolate Chip ink = Tree Stripes & Tree edges including branches
~Daffodil Delight ink = Top of scene on the flat part between the trees
~Pumpkin Pie ink = Center of scene on the flat part between the trees
~Tangelo Twist = Bottom of scene on the flat part between the trees
~Take some time and blend where the colors overlap. 4. Remoisten the sponged side of the embossing folder with your breath. Place your Whisper White card front inside the folder on the uninked side so you can line it up so the trees are straight. Run through your Big Shot. Oooh and Aaaaw at how nice it turned out. Glue to your card base. 5. Ghost. Cut your Whisper White card stock into a triangle with the bottom edge being 2-1/2″ wide and the top point being over 3″ tall. Stick the top point into a circle punch from the outside so only the point gets punched off to form the rounded top of the Ghost. Run Fast Fuse down the outside edges and cover with the Satin Ribbon. Run Fast Fuse over the center parts and cover with two more strips of Satin Ribbon. Trim the rounded top and flat bottom with your scissors. Add two 1/4″ Basic Black punched circles for eyes. Add Dimensionals to the back of your Ghost. 6. Cut your Spooky with the Seasonal Thinlit and Tangelo Twist card stock. I used the Precision Plate and also put Parchment Paper in between the card stock and the Thinlit. 7. Lay out the Ghost and the Spooky in the desired positions. Attach the Ghost with Dimensionals and the Spooky with either Tombow Glue or the Fine Tipped Glue Pen. 8. Add a fun Halloween sentiment to the inside of the card if desired. 9. You can also emboss the back flap of your envelope if desired. Watch this Video for instructions.
INSTRUCTIONS: 1. Cut your Crumb Cake card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Sahara Sand “Door” at 4″ x 5-1/4″. Emboss with your Big Shot and the Woodgrain embossing folder. Glue to card base. 3. Stamp your Wreath on So Saffron card stock using Old Olive, Pear Pizzazz, and Cajun Craze inks. Pay attention to the “Tabs” on the stamps to help you line up everything better. Stamp a Pumpkin Pie Bow on Whisper White card stock. Cut out the Wreath and the Bow with the coordinating Framelits. Attach to your “Door” with Dimensionals. 4. Punch a 3/4″ Circle from Chocolate Chip card stock for your Door Knob. Attach with a Dimensional. 5. Write a nice message to someone special on the inside.
INSTRUCTIONS: 1. Cut your Tangelo Twist card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Tangelo Twist card front at 4-1/4″ x 5-1/2″. Use your Big Shot and the Woodgrain embossing folder to give it some texture. Attach to your card base. 3. Attach your Spider Web Doily to your embossed card front with several Glue Dots. I think I used 9 – one in the center, and one on each of the larger tips. 4. Now for the fun! Stamp the images you want caught in your Spider Web, then cut them out with the coordinating Framelit.
~Witch Hat – Blackberry Bliss ink
~Pumpkin – Pumpkin Pie ink
~Star Wand – Delightful Dijon
~Owl – Chocolate Chip 5. Attach stamped and cut out items to the Spider Web Doily with Dimensionals. Your card is finished.
INSTRUCTIONS: 1. Cut your card base from Thick Whisper White card stock at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Whisper White card front at 4-1/4″ x 5-1/2″. Run through your Big Shot with the Softly Falling Embossing Folder. Glue to your card base. 3. Stamp the Poinsettia outline with Black Memento ink onto Whisper White card stock. Pay attention to where the little arrow points as the other two stamps will also need the arrow pointing in the same direction. 🙂 Stamp the Petals in Real Red ink. Stamp the Leaves in Cucumber Crush ink. Cut out with your Big Shot and the Deco Label Framelit of your choice. Cut the next larger Deco Label Framelit from Cucumber Crush card stock. 4. Cut two 2″ pieces of White Glitter Ribbon. Tuck them under the center side of the Cucumber Crush Deco Label Framelit using Glue Dots. Layer the Stamped image onto the Cucumber Crush with Dimensionals. Attach them to the card front with Dimensionals. Trim Ribbon if needed.
INSTRUCTIONS: 1. Cut your Mossy Meadow card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Into the Woods patterned paper card front at 4″ x 5-1/4″. Put a strip of Fast Fuse on the back about where you want your Baker’s Twine to be. Wrap your Gold Baker’s Twine around your patterned paper three times and attach it to the Fast Fuse. Attach your card front to your card base with Fast Fuse. 3. Punch out your Flower image from the Into the Woods paper. Use the 2-1/2″ Circle Punch. Cut between the flower groups if necessary to get the flower grouping you want. Put Dimensionals on the back. 4. Choose the size Deco Label Framelit you want and cut it out with Mossy Meadow card stock. Run it through the Big Shot with the Woodgrain Embossing Folder. Put Dimensionals on the back. 5. Layer the Circle Flower image and the Deco Label die cut. 6. Choose your Expressions Natural Elements word that you want. Position it and the layered Flower image in the desired positions on your card front. Attach the Expressions word with Tombow Glue. Then attach the Layered Flower image. Attach one or more Into the Woods Elements with Glue Dots. 7. You now have a nice card to give to someone special!
Darryl and Clarissa recently got married and this is the Wedding Card I made for them. The words were typed then printed on Whisper White card stock to personalize this Wedding Card. SUPPLIES: Ink: VersaMark Card Stock: Whisper White
Red Glimmer Paper scrap
Silver Foil Big Shot: Spring Flowers Embossing Folder (retired-choose one you like) Punches:Itty Bitty Accents Punch Pack #133787 (Heart Punch) Curvy Corner Trio Punch #139683 Other: Tombow Glue
Word Processor program and printer
Stampin’ Paper Trimmer
INSTRUCTIONS: 1. Cut your Real Red card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cur your Real Red card front at 4-1/4″ x 5-1/2″. Run through your Big Shot with the Embossing Folder of your choice. Take your VersaMark ink pad and drag it across the top of your embossed card front until you can see all the raised parts are covered with VersaMark ink. These will darken and give a Tone-on-Tone look. 3. Go to your Word Processor computer program. I used Word. Choose the font you like and type in the names and other information. Print on Whisper White card stock. Use your Paper Trimmer to cut out your words leaving about a 1/2″ border between the edge of the letters and the edge of the card stock. Use the Curvy Corner Punch to punch the corners. Attach to your card front with Dimensionals. 4. Punch 4 Itty Bitty Silver Foil Hearts and 1 Red Glimmer Paper Heart. Attach to card with Dimensionals. 5. Emboss the Envelope Flap. Watch This Video to learn how. 6. Add some cash or a gift card and you are ready to attend the wedding! Enjoy!!
INSTRUCTIONS: 1. Cut your Pear Pizzazz card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Pear Pizzazz card front at 4-1/4″ x 5-1/2″. Run through your Big Shot with the Brick Wall embossing folder. Glue to your card base. 3. Cut your patterned paper banner at 2″ x 4-1/4″. Punch out the notch with the Banner Triple Punch. Attach to your card front with Dimensionals. 4. Stamp your sentiment in Pumpkin Pie ink on Very Vanilla or Whisper White card stock. Punch out with the Word Window Punch. Use your Washi Tape Punch to punch out a Pumpkin Pie mat for your sentiment. Layer together with Dimensionals. Attach to card front with Dimensionals. 5. Choose at least one wood element and attach to your card front with Tombow Glue. 6. If you want a fancy envelope, just run the envelope flap through your Big Shot with the Brick Wall embossing folder. Watch this video for more detailed instructions.
I fell in love with this Lighthearted Leaves stamp set as soon as I saw it in the Holiday Catalog! It is Zentango with all the creative lines drawn in for me so I can just have fun coloring. Enjoy using many different color combinations with this Lighthearted Leaves stamp set. I am also happy it coordinates with the Leaflets Framelits. Enjoy playing and making your own colorful leaves! SUPPLIES: Stamp Set: Lighthearted Leaves Photopolymer #139712 (Available September 1, 2015) Inks: Mossy Meadow
Pear Pizzazz Markers for Card 1: stamped in Memento Black
Hello Honey Markers for Card 2: stamped in Mossy Meadow
Cajun Craze Card Stock: Whisper White
Calypso Coral Big Shot:Leaflets Framelits #138283 Lots of Labels Framelits #138281 Elegant Dots embossing folder #138287
Woodland embossing folder #139673 (available September 1, 2015) Punch:Bow Builder #137414 ( for ends of So Grateful…) Other:Metallic Gold Baker’s Twine #132975
INSTRUCTIONS: 1. Cut your Hello Honey card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Calypso Coral card front at 4″ x 5-1/4″. Choose your embossing folder and run it through your Big Shot. 3. Now for the Fun! Stamp your Leaf onto Whisper White card stock using either Memento Black ink or Mossy Meadow ink. 4. Choose your Markers! Decide how you are going to color.
~I colored the first card randomly.
~Second Card. I colored all the “striped” parts Tangelo Twist. The “Scalloped” parts are So Saffron. The “Dotted” parts, flower center circle, and Leaf outline are Crushed Curry. Everything else is Cajun Craze.
TIP: Start coloring with the lightest color first and work your way to the darkest color. 5. Cut out your Leaf with the coordinating Framelit. Attach Dimensionals to the back. 6. Stamp your sentiment in Mossy Meadow ink on Whisper White card stock. Cut out with Framelit, punch, or Paper Trimmer. If desired, stamp leaves in Pear Pizzazz over your sentiment. 7. Place Leaf and sentiment in desired positions. Attach with Dimensionals. 8. Tie a bow with the Gold Baker’s Twine. Attach with Glue Dot(s). If part if it won’t stay where you want it, roll up a Glue Dot and use it to attach the Baker’s Twine where you want it. I used this on Card 2.
INSTRUCTIONS: 1. Choose the following things from your Kit: Bermuda Bay striped card base, 3 colored Die Cut Butterflies and 2 plain Butterlies, Short Banner. You will also need Clear Mount Blocks for your stamps, the other supplies listed above, and your adhesives. Choose your sentiment if you want something different than shown. You want the sentiments to coordinate on the Banner and the Butterflies. 2. Stamp the plain Butterfly die cuts with Calypso Coral and Daffodil Delight ink pads using the “Hello” stamp. I tried to stamp in lines to fill the entire die cut. 3. Remove the excess pieces from the colored Butterflies using your Bone Folder. Attach these Butterflies to the stamped Butterflies by putting 3-4 Glue Dots on the Body of each Butterfly. Fluff up the wings. Color the body of the smallest Butterfly die cut with your Calypso Coral Marker. 4. Stamp the sentiment in Calypso Coral ink. Put Dimensionals on the back. 5. Decide what size of Lots Of Labels Framelit you want to use and cut it out of Pool Party card stock. Put Dimensionals on the back. 6. Position everything the way you want it. Attach the Lots of Labels die cut first, then the Banner. Attach the two larger Butterflies with Dimensionals. Attach the smallest Butterfly with Glue Dots under the center of the Body. 7. You now have a beautiful Butterfly Card!
This Thank You card was made for a wonderful lady at Church who was head of the Women’s organization for many years. We passed it around and everyone signed it. Do you know someone special who deserves an extra-large Thank You?
INSTRUCTIONS: 1. This card uses a full sheet of 8-1/2″ x 11″ Thick Whisper White card stock for the card base. It really does need to be scored (at 5-1/2″) before folding. Use your Bone Folder to make a crisp crease line. 2. Cut your Elegant Eggplant card stock at 5-1/2″ x 6″. Position it inside the Fluttering Embossing Folder so the Butterflies will be in the correct position for putting them on your card front. Attach this embossed piece to your 5-1/2″ x 8-1/2″ Perfect Plum card front with Tombow Glue. 3. Use your Butterfly Thinlits to cut out two large Butterflies: one from Perfect Plum card stock, and one from Glimmer Paper. I like to put a piece of Parchment Paper between the Thinlit and the card stock/Glimmer Paper. You will need to run the Glimmer Paper Butterfly through the Big Shot 4-5 times to get all the parts to completely cut. Watch this Video for more details. 4. Now cut out the “Thanks” and the name from your Thinlits. Use Parchment Paper between the Glimmer Paper and the Thinlit. I think I just ran these through once or twice. 5. Use Tombow Glue to attach the Butterflies bodies together. I put the Perfect Plum Butterfly slightly lower than the Dazzling Diamonds Glimmer Paper Butterfly. You will need to hold them together for a bit to make sure they stay stuck together. 6. Attach the Venetian Crochet Trim to the card. There are several options:
~Run a line of Fast Fuse OR Snail Adhesive where you want the Ribbon
~Put the Adhesive on the back of the card stock and attach the ends of the Ribbon only on the back
~You can also use a few Glue Dots placed under the Ribbon: one at each end and several in between. 7. Arrange the Butterflies, Thanks, and Name in the desired Positions on your card front. Attach with Tombow Glue. Notes:
~This card held together perfectly even after being passed around the room and having lots of ladies sign it.
~You will need to make your own envelope using the Envelope Punch Board since this card is 5-1/2″ x 8-1/2″. I did not make an envelope as it was presented to her with a quilt made by another lady.
Happy Card Making! Nendy Kerr
Search Nendy’s Site
Sign up for my Newsletter
<alt=”Shop Online at My Official Stampin’ Up Store!”>