We are celebrating an anniversay in our family so I made a card using the die cut chairs from the Seasonal Layers Thinlits for the happy couple.
SUPPLIES: Stamps: Sheltering Tree Photopolymer #137163
Teeny Tiny Wishes Wood Mount #128748, Clear Mount #127802
Happy Birthday Gorgeous Photopolymer #143662 Inks: Garden Green
Dapper Denim Card Stock: Thick Whisper White Big Shot: Seasonal Layers Thinlits #143751 Punch: Classic Label #141491 Other: Watercolor Pencils #141709
Fine Tip Glue Pen or Tombow Glue
INSTRUCTIONS: 1. Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″. 2. Stamp with the Sheltering Tree stamps:
~The grass in Garden Green ink five times on the bottom edge of your card base.
~The Tree trunks & branches in Chocolate Chip ink on top of the grass hills.
~The Tree leaves in Wild Wasabi ink over the tree branches. 3. Stamp Happy Anniversary twice in Dapper Denim ink on Whisper White card stock. Then stamp the Classic Label Frame from Happy Birthday Gorgeous over the Happy Anniversary. Punch out with the Classic Label Punch. 4. Die cut two chairs from Whisper White card stock. (You might want to attach the Happy Anniversary to each chair before attaching to card base.) Attach to card base with Fine Tip Glue.
Make someone’s anniversary special by making them this fun anniversary card! Get everything to make this card at My Online Store: nendykerr.stampinup.net .
INSTRUCTIONS: 1. Cut your paper into four 2-3/4″ squares. Attach to sides. Cut 1″ strips for the top. Attach the first strip diagonally down the center, then a strip on each side leaving a white strip in between each patterned strip. 2. Sponge around the edges in Real Red ink if desired. 3. Punch out the Bow Builder Punch twice from Red Glimmer Paper. Put together with Glue Dots. Attach to the lid with Glue Dots. 4. Stamp My Valentine in Real Red ink on Whisper White card stock. Cut it out with one of the Large Tags and Labels tag framelits. 5. Cut 6″ of each the Real Red and Whisper White ribbon. Put together and fold in half. Put the fold through the tag hold and put the ends through the loop formed by the fold. Pull tight. Trim ribbon ends. 6. Attach tag to box with Stampin’ Dimensionals. 7. Fill with treat or small gift.
Have fun giving out your Valentine Treats and Gifts in this Valentine Box.
INSTRUCTIONS: 1. Cut your Real Red card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your patterned paper at 4″ x 5-1/4″. Wait to attach to card base until it is all decorated. 3. Decorate:
~Attach 3 rows of ribbon to the front with SNAIL. You can either run the SNAIL on the card front or on the back of the ribbon. Wrap the ends around to the back and attach with SNAIL.
~Cut out the Gold Glimmer Paper with the Bloomin’ Heart Thinlit. It works best if you put the die on the white back of the Glimmer Paper to cut it out.
~Cut out two large flowers and three small flowers with the Flower Thinlits in the Bloomin’ Heart Thinlits.
~Put a Stampin’ Dimensional on the back of the flower shapes on the Gold Glimmer Paper Heart die cut.
~Put a Stampin’ Dimensional on the back of each Real Red flower .
~Stamp the Banner and greeting in Real Red ink on Whisper White card stock. Cut out with scissors. Put Stampin’ Dimensionals on the back. 4. Lay out all the pieces where you want them, then attach. 5. Add the White Perfect Accents to the center of the flowers. 6. Tie a bow and attach it with either Glue Dots or Tombow Glue. 7. If desired add a 4″ x 5-1/4″ piece of Whisper White to the inside of your card to write on.
This is a fun Valentine’s Card to make. You can also use it for a Wedding or Anniversary card – just add one more heart. It is pretty simple if you want to make several. SUPPLIES: Ink: Real Red Card Stock: Thick Whisper White
Red Glimmer Paper Big Shot:Sunshine Wishes Thinlits #141489 Happy Heart Embossing Folder #137364 Other: Stamping Sponge wedge
INSTRUCTIONS: 1. Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″. 2. Cut you Whisper White card front at 4″ x 5-1/4″. Run through your Big Shot with the Happy Heart embossing folder. Sponge around the edges with Real Red ink. 3. Cut out your Heart and Love from Red Glimmer Paper. Make sure the Love is on top of the Glimmer Paper. Cut out the Heart from the BACK white side of the Glimmer Paper. Glue to embossed card front.
NOTE: For Wedding or Anniversary card cut out two Hearts and overlap them on the card front. 4. Gently sponge Real Red ink over the hearts around the love and Heart die cuts leaving some white areas. 5. Glue to card base.
This fun LOVE card can be used for any LOVE Occasion such as Valentine’s Day, Wedding, Anniversary or just to say I Love You anytime. It is a quick card to make with just a little stamping and glueing on the wooden embellishments. This card is perfect for guys and others who love wood. Every Friday now through Valentine’s Day will feature either a card or something else you can use for Valentine’s Day or other LOVE Occasions.
INSTRUCTIONS: 1. Cut your Watermelon card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Stamp:
~Block Love Banner stamp in Watermelon Wonder ink
~Block Love stamp in Flirty Flamingo ink inside the open LOVE in the Banner.
~Delicate Line Love stamp in Real Red centered inside the Flirty Flamingo Block Love. 3. Choose and lay out the wood embellishments you want. Attach them with the adhesive of your choice. You are done!
Have fun making Valentines for your family and friends!
INSTRUCTIONS: 1. Cut your Cherry Cobbler card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Bloomin’ Heart Thinlit from Silver Glimmer Paper. It will cut best if you put the Thinlit on the White side of the Glimmer Paper. You can also cut five small hearts using the Sweet & Sassy Heart Framelits. (NOTE: I used a retired punch from the Itty Bitty Accents Punch pack.) Glue the Hearts onto your card front. 3. Stamp your sentiment on Whisper White card stock. Punch out with the Decorative Label Punch. Sponge around the edges if desired. Attach to card base with Stampin’ Dimensionals. Add a Real Red Enamel Shapes Heart if desired. 4. If desired, add a 4″ x 5-1/4″ insert in the center of the card to write on.
Enjoy making cards with the Bloomin’ Heart Thinlits.
INSTRUCTIONS: 1. Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″. 2. Cut your Gold Foil at 4″ x 5-1/4″. Run through your Big Shot with the Happy Hearts embossing folder. Attach to your card base with Tombow Glue. 3. Rub your Whisper White card stock with your Embossing Buddy. Stamp your “Happy Anniversary” in VersaMark ink on the Whisper White card stock. Add Gold Embossing Powder to the VersaMark stamped sentiment. Pour off excess Embossing Powder. Melt the embossing powder sentiment with your Heat Tool. Let the embossed sentiment cool for a few seconds. Cut out with the Layering Oval of your choice. 4. Attach sentiment to Silver Metallic Doily with Stampin’ Dimensionals. Add some Gold Sequin Trim to the bottom of your Oval with 3 Glue Dots. Add two Real Red Enamel Shapes Hearts beside the Happy. Attach the layered sentiment and Doily to your card front with Stampin’ Dimensionals.
Enjoy making an Anniversary Card for someone special.
INSTRUCTIONS: 1. Cut your Daffodil Delight card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. Watch this Video for more about card bases. 2. Cut your Designer Series Paper and coordinating Mint Macaron card stock at 4″ x 5-1/4″. 3. Now get out your Big Shot and Letter Framelits. You can use either the Multipurpose Platform that came with your Big Shot or the Magnetic Platform which will hold your Framelits in place. Choose the four letters you want and lay them in the position you want them on your Mint Macron card stock. Run through your Big Shot. Save the center parts of the letters (such as the O here). 4. Use half Stampin’ Dimensionals on the back of your die cut Mint Macaron card front. Place half Dimensionals next to the edges of the letter cut out also. Now add any letter centers with half Dimensionals on the back. 5. Attach to the Designer Series Paper making sure all four sides are lined up. Now attach your layered card front to your card base with Fast Fuse or SNAIL or Tombow Glue.
Have fun making your own Dimensional pretty word card with the Letters for You Framelits for someone special!
This card uses the Falling Flowers Bundle for the images and the Flourishing Phrases stamp set for the words. A sweet and simple card to give to someone you love. SUPPLIES: Bundle: Falling Flowers stamp set + May Flowers Framelits Wood #142328, Clear #142329 Stamps: Flourishing Phrases Wood #141531, Clear #141534 (Bundle with Flourish Thinlits Wood #142322, Clear #142323) Ink: Wild Wasabi
Dapper Denim Card Stock: Melon Mambo
Thick Whisper White Adhesive: Fine Tip Glue Pen
INSTRUCTIONS: 1. Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″. 2. Stamp your sentiment in Dapper Denim ink in the lower left corner on your card base. 3. Stamp your Falling Flowers Flourish in Wild Wasabi ink on your card base above the lower left sentiment. 4. Cut your large Melon Mambo May Flower Thinlit using your Big Shot. I just used my Magnetic Platform and two fairly flat cutting plates. Glue it to your card base by dotting Fine Tip Glue on the back of each petal tip. After laying it on your card base smooth it with your Bone Folder to help it stick to the card better. 5. Stamp I love you in Dapper Denim ink in the upper right space on your card front. Use a Stamp-a-ma-jig if desired. 6. Decorate the envelope flap with the Falling Flowers Flourish you used on the front of your card. 7. Give it to someone you love.
Enjoy using the Falling Flowers Bundle and the Flourishing Phrases stamp sets!
INSTRUCTIONS: 1. Cut your Crumb Cake card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Stamp 1 large flower and 2 small flowers on Whisper White card stock using Rose Red ink. Cut them out with the Bloomin’ Heart Thinlits. Attach them to the Wood Heart Frame with Glue Dots. 3. Choose your patterned paper by holding your decorated Wood Heart Frame over the different patterns in your Paper Stack. 4. Cut the patterned paper you chose at 3″ x 6″. Put SNAIL on the back long edges and a strip down the center. Angle the paper the way you want it. Mine has about 1/2″ on the lower and upper edges. Add your Bow on a Paper Clip before you press down the adhesive well. Press down the paper so the adhesive stick. 5, Put 6-8 Glue Dots on the back of your Wood Heart Frame and attach it to the angled paper. 6. Stamp some small Hearts on your card front in Rose Red ink.
INSTRUCTIONS: 1. Cut your Blushing Bride card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your patterned paper at 4″ x 5-1/4″. 3. Cut a 6 to 6-1/2″ piece of Ribbon. Lay the Ribbon so the lower edge is about 1″ from the bottom of the patterned paper. Put Fast Fuse or SNAIL on the back side of your patterned paper where the Ribbon ends will wrap around. Attach your Ribbon ends pulling your Ribbon kind of tight, but not so tight it will make your paper curl. Attach to your card base with Fast Fuse. 4. Attach your Gold Foil Heart with Stampin’ Dimensionals. 5. Stamp your Banner and Love You on Blushing Bride card stock in Real Red ink. Cut out with scissors. Attach to the Gold Foil Heart with Stampin’ Dimensionals. 6. Attach a Wood Heart to y with 2-3 Glue Dots. Place Glue Dots all around your Wood Heart. Measure the Pearls to go around the Heart. I used 13. Yes, you do need lots of Glue Dots all around your Wood Heart to hold the Pearls in place. They really do not like staying in a circle otherwise.
INSTRUCTIONS: 1. Cut your Cherry Cobbler card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Large Rose using the Thinlit and Dazzling Diamonds Glimmer Paper. It is recommended that you put the Sparkly side down and the Thinlit against the paper backing. The sandwich I used was: Magnetic Platform, Precision Base Plate, Glimmer Paper sparkly side touching the Precision Base Plate, Rose Thinlit, FLAT cutting plate. The FLAT cutting plate is very important so all the thin lines and details get cut properly. I found most of the pieces just fell out. You can use the Big Shot Die Brush if your pieces need help coming out quickly. 3. Cut your Vellum card front at 4″ x 5-1/4″. Set aside.
Use small dots of the Fine Tip Glue Pen along all the thin lines of your Rose. Too much glue will bleed out and stain your Vellum. Attach to your Vellum piece. 4. Stamp your saying using the Tuxedo Memento Black ink. 5. Attaching your Vellum to the card base can be tricky. I dotted a few places under the Rose and I just used 4 Glue Dots at the corners. Apparently some of my Fine Tip Glue Pen dots were too big and bled to stain the card stock. I also used Glue Dots at the corners and covered them with Rhinestones. 6. If desired, cut a piece of 4″ x 5-1/4″ Whisper White to put in the inside of your card to write on.
This fun Valentine Heart Banner Card is perfect for almost anyone! It is also easy to make. Have fun making several of your own! SUPPLIES: Stamps: Bloomin’ Love
Teeny Tiny Wishes Ink: Real Red Card Stock: Thick Whisper White
Red Glimmer Paper Punch: Itty Bitty Accents Punch Pack # Heart Other: Cherry Cobbler Baker’s Twine
Fast Fuse or Tombow Glue
INSTRUCTIONS: 1. Cut your Thick Whisper White card base at 5-1/2″ x 8-1/2″. SCORE and fold at 4-1/4″. 2. Cut a Whisper White card front at 4-1/4″ x 5-1/2″. Lay out the Baker’s Twine. Use the Scotch Tape (adhesive on one side) to hold the ends and the middle in place on the back of the card front. 3. Stamp where desired in Real Red ink. 4. Punch 11 or so Red Glimmer Paper Hearts using the Itty Bitty Accents Heart Punch. Attach the hearts with Glue Dots to the Baker’s Twine and outside corners of the card. 5. You now have a Valentine Card you can give to someone special!
This pretty, quick & easy I Love You Valentine Card is sure to be a hit. You can change the card base and card front colors if this will go to a man. Just make sure the color of your Hearts shows up well against the card front color. SUPPLIES: Card Stock: Pink Pirouette
Red Glimmer Paper
Dazzling Diamonds Glimmer Paper Big Shot: Perfect Dots Embossing Folder
Little Letters Thinlits Punch: Sweetheart # Adhesives: Tombow Glue
INSTRUCTIONS: 1. Cut your Pink Pirouette card base at 5-1/2″ x 11″. Score and fold at 4-1/4″. 2. Cut your Pink Pirouette card front at 4-1/4″ x 5-1/2″. Run through your Big Shot using the Perfect Dots or other embossing folder. Attach to card base. I use Tombow Glue. 3. Punch out 4 Hearts from Red Glimmer Paper using your Sweetheart Punch. 4. Cut out your letters with the Little Letters Thinlits and your Big Shot.
~LOVE from Dazzling Diamonds Glimmer Paper
~IYOU from Red Glimmer Paper 5. Glue your LOVE onto your Hearts. You might have to hold each letter in place for a bit until it starts to stick. I found a pair of Craft Tweezers very helpful to hold the Letter while putting the Tombow on and placing it on the Heart where I wanted it. Craft Tweezers stay closed until you pinch them open. 6. Lay out your LOVE Hearts and the rest of your letters where you want them on your card front. Glue the I YOU directly onto the card front. Attach the LOVE Hearts with Dimensionals.
INSTRUCTIONS: 1. Cut your Rose Red card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your card front at 4-1/4″ x 5-1/2″. Run through your Big Shot with the Elegant Dots embossing folder. Glue onto card base with Tombow Glue. 3. Decide which Oval Framelit to use around your flower swag. Cut it out of Whisper White card stock. Use your Stamp-a-ma-jig to stamp your flower swag twice on your Oval. Use your Stamp-a-ma-jig to stamp Happy Anniversary in the center. Put Stampin’ Dimensionals on the back and attach to your card front.
I have really enjoyed using the Bloomin’ Heart Thinlit and the coordinating stamp set, Bloomin’ Love. This detailed Bloomin’ Heart Thinlit is quick and easy when you use the Big Shot Die Brush and your Bone Folder.
INSTRUCTIONS: 1. Choose the green you want to cut with your Heart Thinlit. 2. Big Shot cutting sandwich: Magnetic OR Multipurpose Platform, Precision Base Plate, card stock, Thinlit with cutting side on card stock, FLAT cutting plate (this makes a huge difference!!). Run through your Big Shot at least once, twice if it didn’t cut all the way. If you can peel off around the Heart, then it cut all the way. If not, just stick down and run through again making sure everything is lined up properly. 3. Take your Thinlit and card stock and place them on the Big Shot Die Brush foam pad and firmly roll the Die Brush over the Heart Thinlit. You can run the Dir Brush over both sides if you need to. The goal is to get most of the excess card stock to separate from the rest of the card stock. When you get an edge so it peels up you can peel up the rest. If it is a little stubborn, you can slide your Bone Folder between the card stock and the Thinlit. This should separate the piece that you want from all the little pieces you don’t want. 4. Choose the ink color(s) for your Flowers. I used the solid ones from the stamp set. Pay attention to the little points on the stamps and put those so they face the same direction. These will help you line up the Flower Thinlits tabs so you can get the Thinlit lined up with the stamped image more quickly. You will need two large flowers and three small flowers. Stamp and cut out with your Big Shot. 5. Put Stampin’ Dimensionals on the back of the flowers and on the back of the Heart in the flower area. Attach the Flowers to the Thinlit. 6. Cut your Designer Series Paper at 6″ x 12″. Make a Large Gift Bag. Watch This Video to show you how. Just make your score lines on the “L”. Punch holes on each line that is the side of the Back and Front. Skip the center pleat lines. Make sure and punch holes at both edges too. 7. Now attach your Heart Thinlit. You can hold a Clear E Block inside so you have a flat surface to press against while attaching your Heart. If you think ahead, you can do this when your bag is flat. The Bag Front has a pleated side on both sides. You score the Bag Back first. 8. Put in your treat or small gift now. 9. If you punched accurately, you can pinch your sides together and see all the way through the holes. This means you only have to thread your ribbon through holes on the left and then on the right (or reversed). If you are not so lucky, pinch the front half of the side together and thread the ribbon through, then the back half of the same side and thread the ribbon through. Repeat with the other side. 10. Pull your ribbon tight and tie a bow. Trim the ribbon ends. You can add a tag if you want. Your Bloon’ Heart Gift Bag is now ready to give to someone special.
This card was made for Melissa’s Bridal Shower. Her Mom also helped me make 60 wedding invitation inserts and 100 Favor boxes using the Baker’s Box Thinlit die. I forgot to take pictures though. I will also be making her Bridal Bouquet so look for it to be posted next week some time as I still need to make it. SUPPLIES: Stamps: For the New Two Wood #131147, Clear #138562 Ink: Black StazOn Markers: Elegant Eggplant
Wild Wasabi Card Stock: Whisper White
Elegant Eggplant Big Shot: Oval Collection Framelits # Punches:Curvy Corners Trio Punch #139683 Other: Fast Fuse Adhesive
INSTRUCTIONS: 1. Cut your Elegant Eggplant card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut a piece of Whisper White at 4-1/4″ x 5-1/2″. Punch the corners with the Curvy Corners Trio Punch. Attach to card base with Fast Fuse adhesive. 3. Get out your Big Shot and Oval Framelits. Cut the Scallop Oval from Elegant Eggplant card stock. Cut the next size from Whisper White. Attach the Scallop Elegant Eggplant Oval to the card front with Stampin’ Dimensioals. 4. Now to stamp on your Whisper White Oval. You might also want to use a Stamp-a-ma-jig to get everything positioned just right. Stamp “For the New Two” in Black ink. Also stamp the flowers twice, both times in Black ink. Color the small flowers with your Elegant Eggplant Marker. Color the larger flowers with the Perfect Plum Marker. Color the berries with the Blackberry Bliss Marker. Color the leaves and stems with the Wild Wasabi Marker. Attach your finished Whisper White Oval to the Scallop Elegant Eggplant Oval with Dimensionals. 5. Cut a piece of Whisper White card stock at 4″ x 5-1/4″. Attach to the inside of the card so you have someplace to write. Write you good wishes to the happy couple. Put in an envelope and attach to the gift.
Darryl and Clarissa recently got married and this is the Wedding Card I made for them. The words were typed then printed on Whisper White card stock to personalize this Wedding Card. SUPPLIES: Ink: VersaMark Card Stock: Whisper White
Red Glimmer Paper scrap
Silver Foil Big Shot: Spring Flowers Embossing Folder (retired-choose one you like) Punches:Itty Bitty Accents Punch Pack #133787 (Heart Punch) Curvy Corner Trio Punch #139683 Other: Tombow Glue
Word Processor program and printer
Stampin’ Paper Trimmer
INSTRUCTIONS: 1. Cut your Real Red card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cur your Real Red card front at 4-1/4″ x 5-1/2″. Run through your Big Shot with the Embossing Folder of your choice. Take your VersaMark ink pad and drag it across the top of your embossed card front until you can see all the raised parts are covered with VersaMark ink. These will darken and give a Tone-on-Tone look. 3. Go to your Word Processor computer program. I used Word. Choose the font you like and type in the names and other information. Print on Whisper White card stock. Use your Paper Trimmer to cut out your words leaving about a 1/2″ border between the edge of the letters and the edge of the card stock. Use the Curvy Corner Punch to punch the corners. Attach to your card front with Dimensionals. 4. Punch 4 Itty Bitty Silver Foil Hearts and 1 Red Glimmer Paper Heart. Attach to card with Dimensionals. 5. Emboss the Envelope Flap. Watch This Video to learn how. 6. Add some cash or a gift card and you are ready to attend the wedding! Enjoy!!
INSTRUCTIONS: 1. Cut your Brushed Gold card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Cut your Gold Fancy Designer Vellum (I chose the Heart Pattern) and your Whisper White card stock at 3-3/4″ x 5″. Put Glue Dots behind all the Hearts closest to the edge and attach to your Whisper White card stock. Drag the edges along your Gold ink pad. Attach to your card base. 3. Stamp “For the New Two” in Metallic Gold ink on Whisper White card stock. Cut out with the Apothecary Accents Framelit. Drag the Gold ink pad over the edges. Attach to card front with Dimensionals. 4. Punch two small hearts and one large heart from Gold Glimmer Paper. Attach the small hearts with Glue Dots. Attach the large heart with Dimensionals. 5. Stamp the Envelope front with the “Mr. & Mrs.” Stamp and add their last name.
My daughter’s and son-in-law’s anniversary was on St. Patrick’s Day and this is the card I made for them. Most of it is quick and easy except for the Heart drying time. Enjoy tweaking this one for someone special. You could use any punched or die cut shape instead of the hearts.
INSTRUCTIONS: 1. Cut your Daffodil Delight card base at 5-1/2″ x 8-1/2″. Score and fold at 4-1/4″. 2. Cut your Night of Navy card front at 4″ x 5-1/4″. Stamp your sentiment in Silver ink. Let dry for a few seconds. Run through your Big Shot with the Lucky Stars Embossing Folder. 3. Punch your Hearts from the Silver and Dazzling Diamonds Glimmer Paper. Lay on the card front in the position you want. Now punch your small stars from Daffodil Delight card stock. Put a dot of Tombow Glue on an embossed Night of Navy Star and glue your punched star on top of an embossed star. Do this until you have as many stars as you want above your hearts. 4. Now lay your sparkly Hearts on the Silicone Craft Sheet. Cover each Heart with Crystal Effects. Let dry for 4-5 hours or overnight. (You can just use the Hearts without the Crystal Effects if you want.) 5. After your Crystal Effects has dried on your Hearts, trim any overhanging Crystal Effects from around the edges of your Hearts with Paper Snips. Glue onto your card. 6. Stamp your sentiment in Black ink on Whisper White card stock. Cut out with the Itty Bitty Banners Framelit. Color the edges with your Daffodil Delight Marker. Attach to Hearts with Glue Dots. 7. If you want to add some excitement to the envelope you can use the Lucky Stars Embossing Folder on the envelope flap. Watch this Video to show you how to do this.
Happy Card Making!
Search Nendy’s Site
Sign up for my Newsletter
Current Stampin’ Up! Catalogs
Get your OWN Paper Pumpkin monthly Craft Kit!
Everything on the Blog and Website is made by me, Nendy Kerr, unless stated otherwise. Stampin’ Up! does not endorse the content on these pages. Thank you for visiting!